Improved in situ Sr isotopic analysis by a 257 nm femtosecond laser in combination with the addition of nitrogen for geological minerals
Wen Zhang,Zhaochu Hu,Yongsheng Liu,Tao Wu,Xiaodong Deng,Jingliang Guo,Han Zhao
DOI: https://doi.org/10.1016/j.chemgeo.2017.12.018
IF: 3.9
2018-01-01
Chemical Geology
Abstract:In situ Sr isotope analysis of geological materials by laser ablation multiple collector-inductively coupled plasma mass spectrometry (LA-MC-ICP-MS) is a powerful tracer technique for tracking magmatic source components and geological processes. However, the accuracy and precision of the 87Sr/86Sr ratio are limited in the analysis of natural minerals because of the low-Sr concentration, the isobaric interference or small grains with complex textural contexts, especially for transparent minerals such as feldspars. In this study, analytical results demonstrated that ablation rates in fs laser ablation were consistent for various samples (0.08–0.11μm per pulse), but those in ns laser ablation were obviously material properties-dependent, such as the rates of 0.026μm per pulse and 0.144μm per pulse for feldspar and pyrite, respectively. In addition, at similar energy fluences, the sensitivities of Sr in feldspars analyzed by the fs laser were 3.4 times higher than those analyzed by the ns laser due to the higher ablation efficiency of the fs pulse. These advantages of the fs laser not only offer the benefit of eliminating or weakening the matrix effect during the laser ablation processes but also help to improve the analytical precision for transparent minerals. We also demonstrated that the isobaric interferences of calcium dimers and argides (CaAr++CaCa+) and Kr+ were dramatically reduced by factors of 6.5–11.7 and 5–12.5 in the presence of 6–12mlmin−1N2, respectively. Furthermore, with the addition of N2 (12mlmin−1), the sensitivity of Rb was inhibited, resulting in a decrease of 1.47 times in Rb/Sr signal ratios. Due to the effect of suppressing interferences by adding N2, both the stability and accuracy of the 87Sr/86Sr and 84Sr/86Sr ratios show improvement, especially for the Rb-rich feldspars.