Densities and Viscosities of the Ternary System Exo-Tetrahydrodicyclopentadiene (1) + N-Decane (2) + 1,2,3,4-Tetrahydronaphthalene (3) and the Corresponding Binary Systems at T = (293.15–333.15) K
Tong Du,Yitong Dai,Peilun Wang,Yongsheng Guo,Wenjun Fang,Shujun Zhao
DOI: https://doi.org/10.1021/acs.jced.0c00969
2021-01-01
Abstract:The densities (rho) and viscosities (eta) of the ternary system exo-tetrahydrodicyclopentadiene + n-decane + 1,2,3,4-tetrahydronaphthalene and the three corresponding binary systems, exo-tetrahydrodicyclopentadiene + n-decane, 1,2,3,4-tetrahydronaphthalene + n-decane, and exo-tetrahydrodicyclopentadiene + 1,2,3,4-tetrahydronaphthalene, were measured at temperatures ranging from 293.15 to 333.15 K and at pressure p = 0.1 MPa. The densities and viscosities were determined using a vibrating-tube densimeter and an automatic microviscometer based on the rolling ball principle, respectively. The values of excess molar volumes (V-m(E)) and the viscosity deviations (Delta eta) of every mixture were calculated with the measured data. The V-m(E) and Delta eta values of the three binary systems and the ternary system were fitted to the Redlich-Kister equation and four semi-empirical equations, respectively. The V-m(E) values are negative for the binary systems of exo-tetrahydrodicyclopentadiene + n-decane and 1,2,3,4-tetrahydronaphthalene + n-decane with the minimum at about x = 0.5, while the V-m(E) value of the binary system exo-tetrahydrodicyclopentadiene + 1,2,3,4-tetrahydronaphthalene is positive with the maximum at x = 0.5. The Delta eta values of the three binary systems are negative over the entire concentration range. For the ternary system, the V-m(E) values are positive when exo-tetrahydrodicyclopentadiene and 1,2,3,4-tetrahydronaphthalene are dominant. Otherwise, the V-m(E) values turn out to be negative. The.. values are negative over the entire concentration range. These phenomena can be explained by physical interactions and structural effects between components.