Abstract:Cobalt-nickel (Co-Ni) free Lithium-rich cathode material (1 − x)Li2MnO3·xLiFeO2 is more environmental friendly and cheaper than other traditional cathode materials. However, the complex synthesis method limits its large-scale practical application. This work explores a simple dry synthesis route to directly obtain 0.7Li2MnO3·0.3LiFeO2 with good electrochemical performance. Calcination temperature is a key factor controlling the phase growth. With the calcination temperature increasing, the crystallization and ordered layered structure are improved, but the LiFe5O8 spinel phase appears in X-ray diffraction (XRD) patterns from 600 °C. The results of selected area electron diffraction (SAED), element mapping (EDS) and vibrating sample magnetometer (VSM) demonstrate convincingly the growth progress of LiFe5O8 as the temperature rises. The spinel phase deteriorates the electrochemical performance. Furthermore, it is proved that the crystallization and activity of Li2MnO3 precursor are effective to retard the formation of LiFe5O8 and enhance the electrochemical performance. The sample calcined at 600 °C exhibits a high initial capacity above 200 mAh g−1, but capacity fades quickly to 120 mAh g−1 after 50 cycles at 0.2 C. The sample calcined at 650 °C with a little LiFe5O8 delivers a low initial capacity about 160 mAh g−1, but stabilizes at 160 mAh g−1 after 50 cycles. Therefore, how to control the formation of thermally stable phase LiFe5O8 is an important issue, and it needs further investigation to achieve Co-Ni free Li-rich cathode materials with excellent performance. Significantly, the simple synthesis and acceptable electrochemical properties make the practical application of Fe-Mn based Li-rich material possible.

Synthesis of LiCoO<sub>2</sub> Powder by Auto-Ignited Combustion of Citrate–Metal Nitrate Precursor

Cathode Materials of Li_xCo_(0.8)Ni_(0.2)O_2 for Lithium-ion Battery

Synthesis of ultrofine LiCoO2 by citrate-nitrate gel combustion process

Synthesis of LiNi0.6Co0.2Mn0.2O2 Cathode Material by a Carbonate Co-Precipitation Method and Its Electrochemical Characterization

Nanocrystalline LiNi1-xCoxO2 cathode materials prepared by a gel-combustion process

High Performances of Ultrafine and Layered LiCoO2 Powders for Lithium Batteries by a Novel Sol–gel Process

From Metal to Cathode Material: in situ Formation of LiCoO2 with Enhanced Cycling Performance and Suppressed Phase Transition

Preparation and electrochemical characterization of LiNi 0.8 Co 0.2 O 2 cathode material by a modified sol–gel method

Synthesis and Characterization of Ultrafine LiCoO2 Powders by a Spray-Drying Method

Synthesis and Characterization of LiNi0.8Co0.2O2 As Cathode Material for Lithium-Ion Batteries by a Spray-Drying Method

The Performance of Li-Ni-Co-O Cathode Materials Synthesized in Air Atmosphere for Cathode Materials for Lithium-Ion Battery

Synthesis and Electrochemical Properties of LiNi0. 5Co0. 5O2 Cathode Material for Lithium Ion Battery

Temperature-controlled direct dry synthesis of Co-Ni free cathode materials 0.7Li2MnO3·0.3LiFeO2 for lithium-ion batteries

Deflagration Synthesis of Nanocrystalline LiNi1/3Co1/3Mn1/3O2 Cathode Material

Influence of Synthetic Conditions on Structure and Electrochemical Performance of Li [ Ni1/3Co1/3Mn1/3 ] O2

Synthesis and Electrochemical Characterization of LiNi0.5Co0.2Mn0.3O2 Cathode Material by Solid-Phase Reaction

Preparation and Performance of LiNi0.8Co0.2O2 Cathode Material Based on Co-substituted Α-Ni(oh)2 Precursor

Preparation and Electrochemical Properties of LiNi_(0.8)Co_(0.2)O_2 Cathode Material by Microwave Coprecipitation Method

Synthesis and Electrochemical Properties of Spinel Lico1/6mn11/6o4 Powders by A Spray-Drying Method

Synthesize and Properties of Spherical Cathode Materials LiNi_(0.8)Co_(0.2)O_2 by Controlled Crystallization Method

Characterization of Wet-Chemistry Synthesized LiNi_(0.8)Co_(0.2)O_2

Synthesis of LiCoO&lt;sub&gt;2&lt;/sub&gt; Powder by Auto-Ignited Combustion of Citrate–Metal Nitrate Precursor