The Progress of Computer Simulation for Ti2AlNb-based Alloy

Wu Bo,Shen Jianyun,Zhang Zhu,Sun Jun,Peng Delin,Liu Songqing

2002-01-01

Rare Metal Materials and Engineering

Abstract:The CALPHAD technology, first-principle method and Embedded Atom Method (EAM) in computer simulation of metals and alloys are outlined. Recent results of computer simulation for Ti(2)AINb-based alloy are reviewed.

What problem does this paper attempt to address?

Atomic-scale computer simulation of mixture precipitation mechanism for Ni75AlxV25-x alloy

Yuhong Zhao,DongYing Ju,Hua Hou

2005-01-01

Materials Science Forum

Abstract:With the microscopic phase-field model, the early precipitation mechanisms of the ternary Ni 75Al xV 25-x alloys with middle Al composition were explored by computer simulation in this paper. Through the simulated atomic pictures and composition order parameters of precipitates, we can explain the complex precipitation mechanisms of θ (Ni 3V) and γ′ (Ni 3Al) ordered phases. Simulated results also show that the precipitation characteristic of γ′ phase transforms from non-classical nucleation and growth to congruent ordering + Spinodal decomposition gradually, otherwise, the precipitation characteristic of θ phase transforms from congruent ordering + Spinodal decomposition to non-classical nucleation and growth mechanism gradually. © 2005 Trans Tech Publications, Switzerland.
COMPUTER SIMULATION FOR PRECIPITATION PROCESSO Ni_<75>Al_<2.5>V_<22.5> ALLOY WITH THE MICROSCOPIC PHASE-FIELD METHOD

Yu Hong Zhao,Dong Ying Ju,Zheng Chen

DOI: https://doi.org/10.1299/jsmecmd.2004.17.307

2004-01-01

Abstract:With the microscopic phase-field model, the precipitation process of aged alloys was explored by computer simulation, which could help us clarify some discussional views on precipitation mechanisms of alloys. In this paper, the precipitation process of Ni_<75>Al_<2.5>V_<22.5> alloy was studied. From simulated microscopic behavior and calculated order parameters of different precipitates, it's found that θ ordered phase precipitated earlier than γ' ordered phase by congruent ordering + spinodal decomposition mechanism and thus produced a nonstoicheometric θ single ordered phase. Then, the nonstoicheometric γ' phase precipitated by a non-classical nucleation and growth, mechanism at the APBS of θ phases. Meanwhile, both of them transformed to stoicheometric ordered phases.
Multi-component Phase-Field Simulation of Microstructural Evolution and Elemental Distribution in Fe–Cu–Mn–Ni–Al Alloy

Yuanyang Sun,Yuhong Zhao,Baojun Zhao,Zhen Guo,Xiaolin Tian,Wenkui Yang,Hua Hou

DOI: https://doi.org/10.1016/j.calphad.2020.101759

2020-01-01

Abstract:A quinary phase-field model coupled with CALPHAD thermodynamic data was developed to simulate diffusion-controlled phase decomposition in the Fe–Cu–Mn–Ni–Al alloy system during isothermal aging. The effects of Ni/Al concentrations and magnetic interactions on the kinetics of Cu-rich phase formation and component distribution features were systematically studied. Simulated atom maps indicate that the Cu-rich phase possessed a complex core−shell structure consisting of a BCC Cu-rich core and a B2 Ni/Al/Mn-rich shell. Ni/Al/Mn-rich shells could be regarded as a buffer layer hindering Cu cluster formation and also as a diffusion channel connecting neighboring small particles, thus influencing the precipitation of the Cu-rich phase. It was found from the analyses of volume fraction and particle size distribution that the deviation between the proposed coarsening law and the theoretical LSW theory occurred due to the inhibiting effect of Ni–Al–Mn shells and the mixed coarsening mechanism of coalescence and Ostwald ripening. High Ni/Al contents and magnetic interactions obstructed the phase separation, growth and coarsening of the Cu-rich phase, thus leading to particle refinement and the clustering of Ni–Al–Mn atoms. Therefore, the obtained results can provide useful information for the preparation of Fe–Cu–Mn–Ni–Al alloy.
A Review of Molecular Dynamics Simulation of Different Ti-Al-Based Alloys

Ningning Li,Zhenjie Hao,Lei Xu,Mingqi Tang,Leyu Wei,Lifei Wang

DOI: https://doi.org/10.3390/met14091018

IF: 2.695

2024-09-06

Metals

Abstract:Ti-Al-based alloys, particularly two-phase TiAl and Ti3Al alloys, have garnered significant attention as potential replacements for various high-temperature structural materials due to their exceptional properties, including low density, oxidation resistance, and high strength at elevated temperatures. Despite these advantages, experimental studies on the microstructure evolution of Ti-Al-based alloys under complex conditions remain challenging to observe and characterize. This review article examines the current research on molecular dynamics (MD) simulations of Ti-Al-based alloys, focusing on two-phase Ti-Al alloys, Ti-Al amorphous alloys, Ti-Al composite materials, and the welding and multi-layer/film applications of Ti-Al alloys. This review highlights the unique capabilities of MD simulations in predicting the behavior of Ti-Al-based alloys and addresses existing scientific challenges. Furthermore, this article discusses future research directions and development prospects in this field.

materials science, multidisciplinary,metallurgy & metallurgical engineering
Dynamic recrystallization of Ti-6Al-4V titanium alloy based on cellular automata

Hongchao Ji,Zhanshuo Peng,Xiaomin Huang,Baoyu Wang,Wenchao Xiao,Shufu Wang

DOI: https://doi.org/10.1177/09544089221125575

2022-09-22

Abstract:Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering, Ahead of Print. Ti-6Al-4V (TC4) alloy is a (α + β) two-phase titanium alloy and has good process plasticity, superplasticity, and corrosion resistance. It is widely used in the aerospace industry. During the hot working process, the microstructure and deformation behavior affect its mechanical properties. However, most of the current research focuses on the use of metallographic methods and physical modeling methods to characterize and estimate the evolution of microstructures and lacks accuracy. Therefore, in this study, the thermal deformation behavior of TC4 titanium alloy is predicted and the dynamic recrystallization process is visualized through thermal simulation test, metallographic test, particle swarm optimization–backpropagation (PSO–BP) algorithm, and cellular automata (CA) method. The conclusions are as follows: the grain growth of TC4 titanium alloy is relatively uneven during hot compression. The increase in temperature and the decrease in strain rate are favorable to dynamic recrystallization. After hot compression, the grain texture appeared in the microstructure of TC4 titanium alloy, and the type and strength of texture changed with the change in temperature. Based on the PSO–BP algorithm, the rheological behavior of TC4 titanium alloy during hot compression is predicted. Compared with the experimental value, the correlation of the PSO–BP model is 0.9972, and the error is within 10%. Finally, using the PSO–BP algorithm as the input, combined with the CA method and the related theory of dynamic recrystallization, the dynamic recrystallization behavior of TC4 titanium alloy during hot compression is simulated. The electron backscatter diffraction test is used for comparison, and the simulated microstructure is similar to the experimental structure after removing the influence of some defects. The average grain size error is within 10%. It shows that this model can well predict the dynamic recrystallization behavior of TC4 titanium alloy during hot compression.
Integrated Numerical Simulations and Experimental Measurements for the Sintering Process of Injection-Molded Ti-6Al-4V Alloy

Shaohua Su,Zijian Hong,Yuhui Huang,Peng Wang,Xiaobao Li,Junwen Wu,Yongjun Wu

DOI: https://doi.org/10.3390/ma15228109

IF: 3.4

2022-01-01

Materials

Abstract:Metal injection molding (MIM) is an advanced manufacturing technology that enables the mass production of high-performance and complex materials, such as the Ti-6Al-4V alloy. The determination of the size change and deformation of the Ti-6Al-4V alloy after the sintering process is challenging and critical for quality control. The numerical simulation could be a fast and cost-effective way to predict size change and deformation, given the large degrees of freedom for the sintering process. Herein, a finite element method based on the thermal-elastic-viscoplastic macroscopic model is developed to predict the shrinkage, deformation, relative density, and crack of injection-molded Ti-6Al-4V after sintering, using the Simufact software. Excellent agreements between experimental measurements and numerical simulations of the size and deformation are demonstrated (within a 3% error), confirming the accuracy of the numerical model. This approach can serve as a guideline for the mold design and sintering optimization of the MIM process.
Mechanism investigation on high-performance Cu-Cr-Ti alloy via integrated computational materials engineering

Zhaokuo Huang,Renhai Shi,Xingyu Xiao,Huadong Fu,Qing Chen,Jianxin Xie

DOI: https://doi.org/10.1016/j.mtcomm.2021.102378

IF: 3.8

2021-06-01

Materials Today Communications

Abstract:In this work, the influence of different Ti additions on microstructure and property in Cu-Cr alloys has been studied and the primary relationship of processing-microstructure-property in Cu-Cr-Ti alloy has been constructed via the CALPHAD-based Integrated Computational Materials Engineering (ICME) approach and experimental validation. The peak-aged Cu-0.5Cr-0.2Ti alloy offers an excellent combination of hardness 192.6 HV, tensile strength 629.3 MPa, yield strength 603.0 MPa, electrical conductivity 51.3 %IACS and elongation 10.9 %. The calculated results suggest that the addition of Ti could promote the nucleation and hinder the growth of Cr precipitate in Cu-Cr-Ti alloys during aging treatment, which may promote the homogeneous formation of small-size precipitate Cr and improve the strength of the Cu-Cr alloy. Microstructural characterization has validated the calculation results and revealed that the exceptional properties of this alloy are mainly attributed to nano-scale Cr precipitates achieved through the optimal thermomechanical processing from present ICME. Thus, the present ICME flowchart is applicable to design alloy composition and optimize the processing for the desired microstructure and property in engineering industries.

materials science, multidisciplinary
Computer Simulation: A Tool for Researching the Basic Physical Properties of NiAl and Ni<sub>3</sub>Al

Chao Xu,Dong Chen

DOI: https://doi.org/10.4028/www.scientific.net/amr.989-994.216

2014-01-01

Abstract:The crystal structures, lattice parameters, volumes, elastic constants, bulk moduli and shear moduli of the binary NiAl and Ni3Al alloys have been predicted by taking the first-principles plane-wave method in combination with ultra-soft pseudo-potentials. Also the pressure dependence ofCij,BandGare described and quantitatively discussed. The calculated results agree with the experimental data. The elastic constants obtained from our calculations meet their mechanical stability criteria. The DOS results show that the strong Ni-Al interaction plays an important role in the chemical bond of the Ni-Al alloys. Our predictions should be testified by the experimental investigations.
CALPHAD-guided Design and Experimental Study on a Novel Al-Ti-Nb Alloy

Gourav Mundhra,Hao-En Peng,Jien-Wei Yeh,B. S. Murty

DOI: https://doi.org/10.1016/j.jallcom.2024.174288

IF: 6.2

2024-01-01

Journal of Alloys and Compounds

Abstract:CALPHAD-guided design methodology was used to develop a novel lightweight Al-Ti-Nb alloy with nearly 50% in-situ formed trialuminide reinforcement. After compositional optimization, we selected Al87.5Ti6.25Nb6.25 (at.%) as the experimental alloy composition and subjected it to a 24-hour homogenization heat treatment at 475°C for attainment of equilibrium, guided by DSC and CALPHAD-derived melting point data. Phase and microstructure analysis revealed a microstructure with approximately 50% volume of an FCC Al-rich matrix and 50% trialuminide phases for strengthening. The experimental onset melting point of the Al-rich matrix was determined to be 647°C, significantly surpassing Al-Si based high-temperature alloys (577 ℃), showcasing the potential of this alloy as a high-temperature structural material. Nanoindentation tests demonstrated exceptional mechanical properties, with a microhardness of 3350MPa that not only outperformed 7075 Al alloy, A390 Al-Si alloy, and commercially pure Ti but also exceeds the levels of Ti-6Al-4V alloy at nearly 28% lower density. The study's significance lies in its integration of CALPHAD predictions and meticulous microstructural investigation, offering an effective approach for the design and characterization of novel Al-based alloys.
Computational Diffusion Kinetics and Its Applications in Study and Design of Rare Metallic Materials

Yujie Cui,Guanglong Xu,Yi Chen,Bin Tang,Jinshan Li,Lian Zhou

DOI: https://doi.org/10.1007/s11434-014-0127-7

2014-01-01

Abstract:Computational diffusion kinetics(CDK),with a spirit of and being coupled with the computational thermodynamics(CT,or called as the CALPHAD technique),plays increasingly important role in the alloy design/optimization and microstructure control during the processing of advanced metallic materials.This paper is to highlight recent progress of CDK in research with great focus on novel Ti and Zr alloys,which was largely performed in the authors’group.It ends with one representative example of the applications of CDK,coupled with CT,quantitative phase field,and three-dimensional(3D)statistical calculation,in designing the heattreatment schedule for the dual phase(αβ)Ti–6Al–4V alloys.
Numerical Simulation for the Transport Phenomena in Melting Processes of Blade-Like Castings Using a Continuum Model

Yunfeng Bai,Daming Xu,Weisheng Bi,Jingjie Guo,Hengzhi Fu

DOI: https://doi.org/10.1109/imsccs.2006.244

2006-01-01

Abstract:Strongly coupled heat, species mass and momentum transport behaviors in melting processes of a 2D bladelike casting of Al-4.5Cu%wt and pseudo-binary ..(TiAl)- 55Al%at alloys were numerically simulated using a continuum model. The strongly pressure-linked liquid flow problems are successfully solved using the authors' proposed Direct-SIMPLE algorithm. Simulation results demonstrate the availability and computational efficiency for computer modeling of the transport phenomena in alloy melting processes.
Development of computational framework for titanium alloy phase transformation prediction in laser powder-bed fusion additive manufacturing

Zhi Liang,Ivan Zhirnov,Fan Zhang,Kevontrez K. Jones,David Deisenroth,Maureen Williams,Ursula Kattner,Kil-won Moon,Wing-Kam Liu,Brandon Lane,Carelyn Campbell

DOI: https://doi.org/10.1016/j.mtla.2020.100934

2020-12-01

Materialia

Abstract:In conjunction with bare metal single laser track validation experiments, a computational framework is proposed to accelerate the design and development of new additive manufacturing (AM) specific alloys. Specifically, Additive Manufacturing-Computational Fluid Dynamics (AM-CFD) and Calculation of Phase Diagram (CALPHAD), were combined to predict location-specific β→α phase transformation for a new Ti-Al-Fe-alloy. This modeling work was validated by rigorous spatially resolved synchrotron-based X-ray diffraction measurements. This framework reasonably predicts the melt pool and heat affected zone features in the experiment and reveals their significance in actual AM conditions. This framework can be applied for rapid and comprehensive evaluation of location-specific thermal history, phase, microstructure, and properties for new AM titanium alloy development.
Numerical Simulation of Superplastic Forming and Diffusion Bonding of Ti Alloys

KF Zhang,WB Han,W Wu,GF Wang,DZ Wu

2003-01-01

Abstract:The research on numerical simulation for combinative process of SPF/DB is carried out in this paper. The contacting problem of sheets is analyzed by using the penalty method. In order to solve the contact problem of different parts of the sheet, a new algorithm for contacting judgment is proposed. According to the relation of the distance vector and the vector of contacting element area, and the condition of contact, it can be judged whether or not a node on the slave surface and the corresponding master surface are in the state of SPF/DB. The Mindlin shell element is employed to simulate SPF/DB process of an asymmetry double-cell cup of Ti-6Al-4V to examine the efficiency of the new algorithm using ARVIP-3D. The results of the numerical simulation are in good agreement with experimental results.
Design of Low-Cost and High-Strength Titanium Alloys Using Pseudo-Spinodal Mechanism through Diffusion Couple Technology and CALPHAD

Chaoyi Ding,Chun Liu,Ligang Zhang,Di Wu,Libin Liu

DOI: https://doi.org/10.3390/ma14112910

IF: 3.4

2021-05-28

Materials

Abstract:The high cost of development and raw materials have been obstacles to the widespread use of titanium alloys. In the present study, the high-throughput experimental method of diffusion couple combined with CALPHAD calculation was used to design and prepare the low-cost and high-strength Ti-Al-Cr system titanium alloy. The results showed that ultra-fine α phase was obtained in Ti-6Al-10.9Cr alloy designed through the pseudo-spinodal mechanism, and it has a high yield strength of 1437 ± 7 MPa. Furthermore, application of the 3D strength model of Ti-6Al-xCr alloy showed that the strength of the alloy depended on the volume fraction and thickness of the α phase. The large number of α/β interfaces produced by ultra-fine α phase greatly improved the strength of the alloy but limited its ductility. Thus, we have demonstrated that the pseudo-spinodal mechanism combined with high-throughput diffusion couple technology and CALPHAD was an efficient method to design low-cost and high-strength titanium alloys.

materials science, multidisciplinary,chemistry, physical,physics, applied, condensed matter,metallurgy & metallurgical engineering
Ab-initio simulation and experimental validation of beta-titanium alloys

D. Raabe,B. Sander,M. Friak,D. Ma,J. Neugebauer

DOI: https://doi.org/10.48550/arXiv.0811.0157

2008-11-02

Materials Science

Abstract:In this progress report we present a new approach to the ab-initio guided bottom up design of beta-Ti alloys for biomedical applications using a quantum mechanical simulation method in conjunction with experiments. Parameter-free density functional theory calculations are used to provide theoretical guidance in selecting and optimizing Ti-based alloys with respect to three constraints: (i) the use of non-toxic alloy elements; (ii) the stabilization of the body centered cubic beta phase at room temperature; (iii) the reduction of the elastic stiffness compared to existing Ti-based alloys. Following the theoretical predictions, the alloys of interest are cast and characterized with respect to their crystallographic structure, microstructure, texture, and elastic stiffness. Due to the complexity of the ab initio calculations, the simulations have been focused on a set of binary systems of Ti with two different high melting bcc metals, namely, Nb and Mo. Various levels of model approximations to describe mechanical and thermodynamic properties are tested and critically evaluated. The experiments are conducted both, on some of the binary alloys and on two more complex engineering alloy variants, namely, Ti-35wt.%Nb-7wt.%Zr-5wt.%Ta and a Ti-20wt.%Mo-7wt.%Zr-5wt.%Ta.
A hybrid finite-element and cellular-automaton framework for modeling 3D microstructure of Ti–6Al–4V alloy during solid–solid phase transformation in additive manufacturing

Shaohua Chen,Yaopengxiao Xu,Yang Jiao

DOI: https://doi.org/10.1088/1361-651x/aabcad

IF: 2.421

2018-04-30

Modelling and Simulation in Materials Science and Engineering

Abstract:Additive manufacturing such as selective laser sintering and electron beam melting has become a popular technique which enables one to build near-net-shape product from packed powders. The performance and properties of the manufactured product strongly depends on its material microstructure, which is in turn determined by the processing conditions including beam power density, spot size, scanning speed and path etc. In this paper, we develop a computational framework that integrates the finite element method (FEM) and cellular automaton (CA) simulation to model the 3D microstructure of additively manufactured Ti–6Al–4V alloy, focusing on the β → α + β transition pathway in a consolidated alloy region as the power source moves away from this region. Specifically, the transient temperature field resulted from a scanning laser/electron beam following a zig-zag path is first obtained by solving nonlinear heat transfer equations using the FEM. Next, a CA model for the β → α + β phase transformation in the consolidated alloy is developed which explicitly takes into account the temperature dependent heterogeneous nucleation and anisotropic growth of α grains from the parent β phase field. We verify our model by reproducing the overall transition kinetics predicted by the Johnson–Mehl–Avrami–Kolmogorov theory under a typical processing condition and by quantitatively comparing our simulation results with available experimental data. The utility of the model is further demonstrated by generating large-field realistic 3D alloy microstructures for subsequent structure-sensitive micro-mechanical analysis. In addition, we employ our model to generate a wide spectrum of alloy microstructures corresponding to different processing conditions for establishing quantitative process-structure relations for the system.

materials science, multidisciplinary,physics, applied
Research Progress of Titanium Alloy Design-From Empirical Methodology to Integrated Calculation

Zhu Wenguang,Xin Shewei,Wu Di,Chen Wei,Zhang Conghui

2021-01-01

Rare Metal Materials and Engineering

Abstract:In recent years, material design approach is being changed from trial and error experiments to integrated calculation based on computational models in synergy with the rapid development of materials genome initiative (MGI) and integrated computational materials engineering (ICME). High specific strength, outstanding corrosion resistance and good fatigue properties make titanium alloys widely used as structural material for aerospace and implants for biomedical area. This paper reviews the development history and alloying methodology of beta titanium alloys. The near beta alloys with addition of multi elements such as Al, Zr, Sn, Mo, V, Cr and Fe is becoming more and more attractive. Several design approaches were summarized in this paper, including Mo equivalent method, e/a method and "cluster-plus-glue-atom" model based on empirical methodology, and some method based on computational thermodynamics or first principles. Finally, the integrated calculation model of computational design used for hierarchically structured materials was discussed in detail and the potential application of this approach in titanium alloy design was analyzed.
Recent Achievements and Future Directions of TiAl-Based Intermetallic Compounds

Z. Lian

Abstract:The recent achievements,main problems and applications of TiAl-based intermetallic compounds are reviewed in this paper.The mechanical properties,metallurgy and deforming technology of TiAl-based alloys are systemic summarized.Combine the up to date fruits,the possible near future developing directions of light-weight TiAl-based intermetallic compounds for high temperature structural applications are forecasted.

Engineering,Materials Science
Phase-field Simulation of Phase Separation Coupled with Thermodynamic Databases in FeNiCrCoCu High-Entropy Alloys

He Tengwu,Chen Xiuhua,Qi Yuming,Feng Miaolin

DOI: https://doi.org/10.1007/s00339-022-06101-y

2022-01-01

Abstract:The simulation of microstructural evolution in multi-principal element alloys is still challenging although for alloy development it is of high importance. In the work, a phase-field model linked with CALPHAD thermodynamic databases is utilized to explore the microstructural evolution during diffusion-controlled phase separation in the Fe–Ni–Cr–Co–Cu high-entropy alloy system with elastic lattice misfit. The compositional fluctuation and temperature effect on the elemental distribution and the kinetics of Cu-enriched phase formation are systematically investigated. The simulated results show that the Cu-enriched phase has a complicated core–shell structure consisting of a Cu-enriched core and a Ni/Fe shell. The latter as a buffer layer possesses retardant effect on the formation of Cu-enriched precipitates. Furthermore, the high Ni/Fe concentration delays the phase separation, growth and coarsening of the Cu-enriched phase, leading to particle refinement and the increasing width of the Ni/Fe shell. Besides, high temperature accelerates the phase separation and simultaneously promotes the growth and coarsening of nanoscale Cu-enriched precipitates. The present work expands the knowledge of phase separation in multicomponent alloy systems and provides insights to optimize material microstructure and properties.
Prediction of Solid-Liquid Interface Stability and Dendritic Growth in Multi-Component Alloys with Calphad Method

RJ Zhang,Z He,WQ Jie

DOI: https://doi.org/10.4028/www.scientific.net/msf.475-479.2721

2005-01-01

Materials Science Forum

Abstract:A method to predict the solid-liquid interface stability and the constrained dendrite growth of multi-component alloys was developed based on the Calphad method. The method was applied to several industrial Al-Si-Mg alloys, and the predicted results were compared with some former experimental data. The good agreement between the calculation results and the experimental data demonstrates the superiority of the present method to the classical one based on constant parameter assumptions.

The Progress of Computer Simulation for Ti2AlNb-based Alloy

Atomic-scale computer simulation of mixture precipitation mechanism for Ni75AlxV25-x alloy

COMPUTER SIMULATION FOR PRECIPITATION PROCESSO Ni_&lt;75&gt;Al_&lt;2.5&gt;V_&lt;22.5&gt; ALLOY WITH THE MICROSCOPIC PHASE-FIELD METHOD

Multi-component Phase-Field Simulation of Microstructural Evolution and Elemental Distribution in Fe–Cu–Mn–Ni–Al Alloy

A Review of Molecular Dynamics Simulation of Different Ti-Al-Based Alloys

Dynamic recrystallization of Ti-6Al-4V titanium alloy based on cellular automata

Integrated Numerical Simulations and Experimental Measurements for the Sintering Process of Injection-Molded Ti-6Al-4V Alloy

Mechanism investigation on high-performance Cu-Cr-Ti alloy via integrated computational materials engineering

Computer Simulation: A Tool for Researching the Basic Physical Properties of NiAl and Ni<sub>3</sub>Al

CALPHAD-guided Design and Experimental Study on a Novel Al-Ti-Nb Alloy

Computational Diffusion Kinetics and Its Applications in Study and Design of Rare Metallic Materials

Numerical Simulation for the Transport Phenomena in Melting Processes of Blade-Like Castings Using a Continuum Model

Development of computational framework for titanium alloy phase transformation prediction in laser powder-bed fusion additive manufacturing

Numerical Simulation of Superplastic Forming and Diffusion Bonding of Ti Alloys

Design of Low-Cost and High-Strength Titanium Alloys Using Pseudo-Spinodal Mechanism through Diffusion Couple Technology and CALPHAD

Ab-initio simulation and experimental validation of beta-titanium alloys

A hybrid finite-element and cellular-automaton framework for modeling 3D microstructure of Ti–6Al–4V alloy during solid–solid phase transformation in additive manufacturing

Research Progress of Titanium Alloy Design-From Empirical Methodology to Integrated Calculation

Recent Achievements and Future Directions of TiAl-Based Intermetallic Compounds

Phase-field Simulation of Phase Separation Coupled with Thermodynamic Databases in FeNiCrCoCu High-Entropy Alloys

Prediction of Solid-Liquid Interface Stability and Dendritic Growth in Multi-Component Alloys with Calphad Method

COMPUTER SIMULATION FOR PRECIPITATION PROCESSO Ni_<75>Al_<2.5>V_<22.5> ALLOY WITH THE MICROSCOPIC PHASE-FIELD METHOD