Abstract:Mechanical property testing, spectral analysis, phase analysis, scattering evaluation and mechanism research of CFRP under various temperature and moisture composite environments. Temperature and moisture are important environmental conditions governing the usage of carbon fiber‐reinforced plastics (CFRP). In this study, tensile, compression, and shear tests of woven CFRP composites were conducted in four composite environments: cold‐temperature dry state, room‐temperature dry state, elevated‐temperature dry state, and elevated‐temperature wet state. Fourier transform infrared (FTIR) spectroscopy was used to analyze the molecular composition and structure under these environments. The fracture morphology was also analyzed using scanning electron microscopy (SEM) to understand the deterioration mechanism of the material properties at the macro and micro scales. Finally, a two‐parameter Weibull statistical model was used to evaluate the scattering of the composites. The results demonstrate that the tensile, compressive, and shear properties of the material decrease under harsh conditions, and the degradation effect on the ultimate strength is much greater than that of the modulus. Cold‐temperature dry and elevated‐temperature wet conditions are particularly severe. Composite environments significantly affect the macroscopic failure process and ultimate failure mode of materials. In general, the temperature and humidity of the matrix system acts at the core of the deterioration mechanism of composites, affecting the properties of the fiber/matrix and orthogonal woven fiber interfaces, and eventually resulting in a loss of their constitutive strength and bearing capacity. The theoretical ultimate strength were consistent with the experimental values. Highlights Comprehensive mechanical property testing in multiple composite environments. Degradation mechanisms were revealed from multiscale morphology analysis. Scattering of composites were evaluated using statistical analyses. Cold temperature dry and elevated temperature wet were the worst states. Deterioration effect of environment on matrix and interface is the core failure mechanism.

Research on tensile fracture mechanism of hybrid CARBON-CARBON composites at ultra high temperature

EXPERIMENTAL INVESTIGATION ON MECHANICAL PROPERTIES OF HYBRID CARBON-CARBON COMPOSITES AT ULTRA-HIGH TEMPERATURE

In-Situ Study of High Temperature Tensile Fracture Mechanism of Mar-M247 Alloy

Mechanical Properties and Microstructures of Steel-basalt Hybrid Fibers Reinforced Cement-based Composites Exposed to High Temperatures

Elevated temperature effect on tension fatigue behavior and failure mechanism of carbon/epoxy 3D angle-interlock woven composites

Mechanical Behavior of carbon felt-carbon composites under ultra-high temperature

Tensile Mechanical Behavior and Failure Mechanism of a Plain-Woven SiCf/SiC Composites at Room and Elevated Temperatures

Failure Behavior And Performance Analysis Of Hybrid-Fiber Reinforced Paek Composites At High Temperature

Effect of Welding Defects on Mechanical Properties of Welded Joints Subjected to Temperature

Correlation Between Macroscopic Properties and Microscopic Pore Structure in Steel-Basalt Hybrid Fibers Reinforced Cementitious Composites Subjected to Elevated Temperatures

Characterization of temperature dependence of fracture behavior of monolithic and laminated ultra‐high temperature ceramic matrix composites

Tensile mechanical behavior and failure mechanisms of fiber metal laminates under various temperature environments

INVESTIGATION OF THE THERMO-MECHANICAL PROPERTIES OF THERMALPROTECTIVE COMPOSITES UNDER HIGH TEMPERATURE

Longitudinal tensile analysis of carbon fiber/epoxy composites under the coupling effect of high and low temperature cycle-humidity-bending load

Stress-Induced Microcracking and Fracture Characterization for Ultra-High-Temperature Ceramic Matrix Composites at High Temperatures

Effect of thermal and hydrothermal aging on the crashworthiness of carbon fiber reinforced plastic composite tubes

High-temperature tensile behavior of 3D SiC/SiC composites

A New Method for Determining Strength and Fracture Toughness of Ceramic Materials in Air at 1500-2000 °C

Effect of heat treatment on the microstructure, mechanical properties and fracture behaviors of ultra-high-strength SiC/Al–Zn–Mg–Cu composites

Analysis of Tensile Failure Behavior of Metal Fiber Laminates Under Different Temperature Environments

Effect of temperature and moisture composite environments on the mechanical properties and mechanisms of woven carbon fiber composites