Abstract:The Li2MoO3 (LMO) material is one promising cathode material for lithium-ion batteries due to its high specific capacity and absence of oxygen release. However, its surface instability in air and poor conductivity have limited its application. To solve these problems, the Ru element has been successfully introduced into the LMO lattice with the aid of the molten salt method. XRD and TEM characterization showed that the introduction of Ru does not change the crystal structure but expands the crystal plane spacing of the {001} facets, which is further evidenced by density functional theory (DFT) calculations. XPS and EDS tests indicated that the introduction of Ru inhibits the oxidation of Mo species and leads to a more uniform distribution of the material. In addition, DFT calculations revealed that covalent interactions are formed between Mo4d/Ru4d and O2p orbitals, leading to a significant reduction of the band gap. Therefore, Ru-doped samples exhibit good electrochemical performances. The initial discharge capacity of an LMRO-2 sample reaches 299.1 mA h g-1 at a 1C rate, and the capacity remains at 125.2 mA h g-1 after 100 cycles. In comparison, the initial discharge capacity of pure phase sample LMO is only 250.5 mA h g-1 under the same conditions, and the capacity remains only at 76.5 mA h g-1 after 100 cycles. The present results confirmed that Ru doping is an effective strategy to improve the performance of the LMO cathode material.

A study on the carbonizing processes of La2O3-Mo cathode

Surface carbonization of Mo-La2O3 cathode

Carbonization Kinetics of La2o3-Mo Cathode Materials

High temperature XPS/AES investigation of Mo-La2O3 cathode I. Species and properties of oxygen on surface

EMISSION MECHANISM OF La2O3-Mo CATHODE

Chemical Stability of La2o3 in La2o3-Mo Cathode Materials

A study of chemical behavior of lanthanum in La2O3–Mo thermionic cathode materials

Study of Formation of La2O3 Nanoparticles Inla2o3-Mo Cathode

Function mechanism of carbide layer on surface of La2O3-Mo cathode

High Temperature XPS Study of Carburized La2O3-Mo Cathode Material

Effects of Ru doping on the structural stability and electrochemical properties of Li2MoO3 cathode materials for Li-ion batteries

High temperature XPS/AES investigation of Mo-La2O3 cathodes II. Variation of lanthanum during activation

Characterization of Carburized La2O3 Doped Mo Filament Cathode

Surface segregation of la2O3 molecules in Mo-La2O3 cathode materials

A Study of the Emission Property and Mechanism of La-Mo Cathode

A study of diffusion behavior of elements lanthanum and oxygen in Mo–La2O3 cathode

Thermodynamic analysis of Mo-La2O3 thermionic cathode wire

Study on Emission Mechanism of Mo-Y2O3 Cathode

Superficial Segregation Of La2o3 In Mo-La2o3 Cathodes

Unraveling Reaction Mechanisms of Mo2C As Cathode Catalyst in a Li-CO2 Battery.

A Study on La2O3-Y2O3-Mo Secondary Emission Material