Abstract:In this work, regenerated cellulose films were prepared with an iced dissolution method, while the physical morphologies and crystal types of the products were systematically characterized with scanning electron microscope (SEM), Fourier transform infrared(FTIR), while X-Ray Diffraction (XRD). The results demonstrate that the as-prepared continuous and uniform films are indeed cellulose Ⅱ, whose morphology and crystal type are significantly different from those of the degreased cotton. Moreover, Terahertz time domain system (THz-TDS) and FTIR were employed to measure the THz spectra of the regenerated cellulose films. Accordingly, the THz characteristic peaks for the regenerated cellulose films are experimentally identified for the first time. In addition, the increase of the THz transmittance with the decrease of the wavenumber is attributed to the existence of amorphous components in the regenerated cellulose films. Although the shapes of Far-IR spectra in the range of 100～700 cm-1 are similar, the absorption peaks of the regenerated cellulose films move to lower wavenumbers (blue shift) compared with those of the degreased cotton. Based on this, we developed a new approach to distinguish the allomorphism of cellulose Ⅱ and cellulose Iβ by Far-IR. Particularly, geometry optimization and IR calculation for the crystal structure of cellulose Ⅱ have been successfully processed by Density Functional Theory (DFT) using periodic boundary condition via CASTEP package. The calculated absorption peak positions are in good agreement with those experimentally measured. Consequently, the THz characteristic peaks of the regenerated cellulose films have been systematically and successfully assigned. Theoretical calculations reveal that the peaks at 42 and 54 cm-1 are assigned to the lattice vibration modes coupled with translational mode and rotational mode, respectively. Moreover, the absorption peaks in the range of 68～238 cm-1 are related with the torsion vibration of —CH2OH group and deformation vibration of C—H bond and O—H bond, while those in the range of 351～583 cm-1 are assigned to the skeletal vibration of C—O—C bond and pyranoid ring, and those at 611 and 670 cm-1 are originated from the out-of-plane bending vibration of O—H bond. Each absorption peak is involved in more than single vibration mode. The THz spectra presented in this work, together with the theoretical simulations, indicate that the THz responses of regenerated cellulose are closely associated with both its chemical constituents and molecular structure. These results will be helpful not only for better understanding the relations between the molecular structure of the regenerated cellulose and its THz spectrum, but also for providing valuable information for future studies on the physical mechanisms of THz responses of other partially-crystalline polymers and organic biological macromolecules.

Characterization of Regenerated Cellulose Membranes Hydrolyzed from Cellulose Acetate

The Cellulose Regeneration in Imidazolium-based Ionic Liquids and Anti-solvents Mixtures: A DFT study

Structure and Properties of the Regenerated Cellulose Membranes Prepared from Cellulose Carbamate in Naoh/Zno Aqueous Solution

Preparation and Characterization of Cellulose Regenerated from Phosphoric Acid

Cellulose Membranes from Cellulose CO2-Based Reversible Ionic Liquid Solutions

Cellulose Membranes from Cellulose CO 2 -Based Reversible Ionic Liquid Solutions

Acid Activation of Cellulose

Properties of Cellulose Regenerated from Powerful 1-Butyl-3-methylimidazolium Acetate/Dimethyl Sulfoxide Solvent

Effect of acid hydrolysis on regenerated kenaf core membrane produced using aqueous alkaline-urea systems

Effect of Anti-Solvents on the Characteristics of Regenerated Cellulose from 1-Ethyl-3-methylimidazolium Acetate Ionic Liquid

Effect of regeneration solvent on the characteristics of regenerated cellulose from lithium bromide trihydrate molten salt

In-situ Grafting Polymerization of Acrylamide onto Regenerated Cellulose Film and Its Application

Preparation, Characterization and Properties of Cellulose Acetate-Grafted-Poly(Glycidyl Methacrylate) Copolymers

Preparation and characterization of cellulose carbamate membrane with high strength and transparency

PREPARATION AND CHARACTERIZATION OF CELLULOSE ACETATE WITH HIGH DEGREE OF SUBSTITUTION AND HIGH CRYSTALLINITY

Experimental and Theoretical Study on Terahertz Spectra for Regenerated Cellulose

Preparation and Characterization of Porous Cellulose Acetate Nanofiber Hydrogels

Preparation And Characterization Of Regenerated Cellulose Film From A Solution In Lithium Bromide Molten Salt Hydrate

Novel Regenerated Cellulose Films Prepared by Coagulating with Water: Structure and Properties.

COMPARISON OF REGENERATED CELLULOSE MEMBRANE COAGULATED IN SULPHATE BASED COAGULANT

Study of Forming-Membrane Property of Soft Cellulose after Steam Explosion in aqueous NaOH Solution