Abstract:Previous studies on the austenite grain growth were mostly based on a fixed temperature, and the relationship between the austenite grain and austenitizing parameters was fitted according to the results. However, there is a lack of quantitative research on the austenite grain growth during the heating process. In the present work, based on the diffusion principle of the controlled Ti microalloying element, the diffusion process of carbonitrides containing Ti during the heating process was analyzed. Combined with the precipitation model and the austenite growth model, the prediction model of austenite grain growth of Ti microalloyed steel during different heat treatment processes was established. The austenite grain size versus the temperature at four different heating rates of 0.5, 1, 10, 100 °C/s was calculated. The grain growth behavior of austenite during the heating process of Ti microalloyed steel was studied by optical microscope, scanning electron microscope and transmission electron microscope. The experimental data of the austenite grain size was in good agreement with the calculation by the proposed model, which provides a new idea for the prediction of austenite grain size in non-equilibrium state during the heating process. In addition, for Ti-containing microalloyed steels, the austenite grain size increased with the increasing heating temperature, while it changed little by further prolonging isothermal time after certain heating time, which was related to the equilibrium degree of the precipitation and the dissolution of Ti element. The austenite grain coarsening temperature of the tested Ti microalloyed steel was estimated within 1100~1200 °C.

Prediction of Ferrite Grain Size After Transformation in the Controlled Rolling and Controlled Cooling

PREDICTION OF GRAIN SIZE OF Α-Fe TRANSFORMED FROM AUSTENITE THROUGH LOW TEMPERATURE HEAVY DEFORMATION

Prediction of grain of α-Fe transformed from austenite through low temperature heavy deformation

GRAIN SIZE PREDICTION AFTER CONTINUOUSLY COOLING TRANSFORMATION FROM DEFORMED AUSTENITE TO FERRITE

Modeling of ferrite transformation kinetics during hot strip rolling of the Q460 grade steel

Computer Simulation of Ferrite Transformation During Hot Working of Low Carbon Steel

Kinetics of Deformed Austenite→Ferrite Transformation

Mathematical Model of Ferrite Transformation of Nb Microalloyed Steels Through Low Temperature Heavy Deformation

EFFECT OF AUSTENITE GRAIN SIZE ON STRAIN ENHANCED TRANSFORMATION IN A LOW CARBON STEEL

Modeling of Ferrite‐Austenite Phase Transformation

Modelling of Recrystallization Behaviors and the Evolution of Γ-Grain Size During Grain-Refining Rolling of Super-Steel

Ultra-fine ferrite formation during deformation of undercooled austenite in a low carbon steel

Microstructural evolution during the austenite-to-ferrite transformation from deformed austenite

Austenite Grain Ultrarefinement and the Formation of Nanocrystallized Structure through Transformation of Low Carbon Steels

Controlled Rolling of Microalloyed Steels for Ultrafine Ferrite

Ferrite Grain Refinement by Large Deformation at Low Temperature After Rapid Cooling

Mechanisms of Microstructure Evolution During Deformation of Undercooled Austenite in a Low Carbon Steel

EFFECT OF DEFORMATION-INDUCED TRANSFORMATION PROCESS ON FERRITE GRAIN SIZE AND VOLUME FRACTION IN STEEL 12CR1MOV

Modeling of Incubation Time for Austenite to Ferrite Phase Transformation

Austenite Growth Behavior and Prediction Modeling of Ti Microalloyed Steel

Effect of Grain Size and Residual Strain on the Dynamic Transformation of Austenite under Plate Rolling Conditions