Abstract:The random disturbance in the leading fiber is considered as a vital noise source in the practical interferometric fiber Bragg grating (FBG) sensor array, which is usually interrogated by periodic laser pulse pair. As the two interrogation laser pluses propagate through the leading fiber in a time-sharing manner, the leading fiber disturbance could cause undesired demodulated phase noises to both the polarization state and the pulse-interval, which are summarized as the polarization fading induced noise and the Doppler noise, respectively. This paper focused on the Doppler noise under the demodulation scheme of polarization switching (PS) and phase generated carrier (PGC) hybrid processing method. A model describing the transformation from arbitrary leading fiber stretching to sensor phase background was presented. The complexity was that the Doppler noise was coupled with the birefringence states, as verified by both simulation and experiment. In response to this issue, a two-stage Doppler noise suppression method was proposed, which is based on the PS and PGC hybrid processing and a reference sensor. A processing procedure was presented where the polarization synthesis must be performed before and the reference sensor was considered. Otherwise, the suppression algorithm will be completely invalid due to the mutual coupling of the Doppler noise and the birefringence. Experimental results showed that only after the first stage of polarization synthesis, identical Doppler noise in the two TDM channels could be obtained, with an amplitude error of 0.02 dB. The second stage involved non-sensitive reference sensor subtraction, which achieved a maximum suppression of about 30 dB, which was the highest to be best of our knowledge. The two-stage Doppler noise suppression method was tested for sinusoidal and wideband leading fiber disturbances, providing a solution for practical interferometric FBG array applications.

Signal Processing with Divide/Combine Depolarization-Induced-Fading Technique of an Interferometric Fiber-Optic Sensor

Development of an Interferometric Fiber-Optic Sensor and Its Array′s Divide/Combine Polarization-Induced-Fading Eliminated Technique

Study on Elimination of PIF in Interferometric Fiber Optic Sensor and Its Array

Polarization-Induced Fading Eliminating with Polarization Switching in the Optic Fiber Sensor

Eliminating polarization-induced fading in interferometric fiber-optic arrays by modulation

Study of polarization-insensitive fiber optic michelson interferometric sensors

Signal Detection Technique for Fiber-Optic Interferometric Sensors

A Novel Demodulation Scheme of Fiber-Optic Interferometric Sensor Based on FM SSB Signal

An Optical Orthogonal Heterodyne Demodulation Technology for Interferometric Fiber-optic Sensor

Optical Signal Processing of a Distributed Fiber Optical Force Sensor

An Improved Polarization Compensation Method for Interferometric Fiber-Optic Intrusion Sensors

The Study of Input Polarization Control Scheme for Multiplexing of Polarization-insensitive Fiber Optic Interferometric Sensors

Dual-Polarization Fiber Optic Differential Interferometer for High-Sensitivity Sensing Applications

Enhanced Sensitivity Via Polarization Switching in Fiber-Based Quantum Sensing

Polarization-Induced Fading Elimination Technique in Brillouin Optical Time-Domain Analysis Sensor

Demodulation Algorithm for Frequency-Division-Multiplexed Fiber-Optic Fizeau Strain Sensor Networks

Phase-shifted demodulation scheme for fiber-optic interferometric sensors with combined waveform phase modulation

Design of a Signal Processing Circuit for the Embedded Optical Fiber Displacement Sensor

Analysis of polarization dependence of fiber optic security systems

Fiber Michelson Sensor Signal Processing by Using of Optical Bistable Device in Frequency Domain

Analysis on Leading-Fiber-induced Doppler Noise in Interferometric FBG Sensor Arrays Using Polarization Switching and PGC Hybrid Processing Method.