Abstract:In recent years, the dynamic CT technology has attracted more and more attentions in medical and industrial applications. Instead of increasing the rotation speed of the gantry because of the mechanical limits, a more feasible method is to increase the amount of x-ray sources and detectors like the dual-source CT of Siemens. This paper focuses high resolution CT imaging (e.g. 50μm) of in vivo human body. We propose and try to develop a new CT system named instant CT which uses about 35 couples of carbon nanotube (CNT) x-ray sources and flat-panel detectors. All of these CNT x-ray sources and detectors are installed on the same gantry. It scans the target region-of-interest (ROI) dozens of times to collect the sufficient amount of projection data. At each exposure position, all of the x-ray sources are fast pulse-exposed synchronously, and the flat-panel detectors collect the projection data. Then, the gantry rotates a little angle to prepare for the next exposure until the rotation covers the angle between two x-ray sources. Because each exposure is very fast (about 0.1~5ms) the organ motions of in vivo human body can be greatly reduced. This paper introduces the instant CT system design, image reconstruction algorithms and experimental results. The image reconstruction for this multi-source instant CT includes three steps: few-view ROI image reconstruction from one simultaneous exposure data, motion registration among the sequence CT images from different exposures, and high resolution ROI image reconstruction with motion correction from all of the sequence projection data. Experiments were designed on our micro-CT system with a homemade phantom. The results validated the efficiency of this new CT system and reconstruction algorithms.

Real Time Reconstruction and Inspection Scheme Used in High Resolution Industry CT

Suppression of Artifacts Caused by Phase Errors and Noises in X-Ray Phase Computed Tomography

Principle and Realization of Segmenting Contour Series Algorithm in Reverse Engineering Based on X-Ray Computerized Tomography

Design of CT Reconstruction Software Based on the Air Container CT Inspection System

Study on Pipelining Image Reconstruction in Large Industrial CT

CT image reconstruction via industrial CT fast scanning

Online Baggage Inspection with single-slice-helical CT

Research on Binary CT Image Reconstruction of Steel Tube Section from Three Projections

An architecture design and realization of the industrial CT visualization system

Fast Reconstruction of Industry CT Image Based on Wintel and P4 Structure

Low-Dose Liver Ct Images Segmentation and 3d Reconstruction

Research on Image Reconstruction of DR/SSCT Security Inspection System

Algorithm-driven Advances for Scientific CT Instruments: From Model-based to Deep Learning-based Approaches

The Application of Digital Tomosynthesis to the CT Nondestructive Testing of Long Large Objects

Fast Imaging By A Single-Slice-Detector Helical Ct

CT Image Reconstruction of Steel Pipe Section from Few Projections Using the Method of Rotating Polar-Coordinate

A novel design of industrial real-time CT system based on sparse-view reconstruction and deep-learning image enhancement

Iterative image reconstruction with variable resolution in CT

Experimental Study on Computer Simulation of CT Image Reconstruction

CT Reconstruction from Simultaneous Projections: A Step towards Capturing CT in One Go

The Multi-Source Instant CT for Superfast Imaging: System Concept, Reconstruction Algorithms and Experiments