Abstract:The quasi-rigid body model is the relationship model between the volume error and the geometric error of the CMM under the consideration of simple deformation. The quasi-rigid body model reflects the comprehensive influence of all geometric errors and ensures the calibration accuracy of geometric errors. However, the geometric error solution based on the quasi-rigid body model has the problem of multicollinearity. To solve this problem, in this study, the geometric errors of CMM are compensated using laser tracing multistation measurement technology and the LASSO (Least absolute shrinkage and selection operator, LASSO) algorithm. First, a laser tracing multi-station measurement model is established, and then the coordinates of the laser tracer station are obtained by solving the redundant equations provided by the laser tracer multi-station measurement system using the L-M (Levenberg Marquardt) algorithm. The global positioning system localization principle combined with the L-M algorithm is used to determine the actual position of the CMM measurement point. Then, the volume error is determined by calculating the difference between the actual position of the measurement point and the planned position. A mathematical model of the volumetric and geometric errors is obtained from the CMM quasi-rigid body model, and the LASSO algorithm is used to solve the model to obtain the 17 geometric errors of the CMM. Using the relationship between the volume error and the uniaxial geometric error, the 4 rotational errors are solved of εz (x), εx- (z), εv (z), εz (z). To verify the measurement accuracy of the compensated CMM, the compensation effect is verified by using the XL80 interferometer with the measuring block. The experimental results indicate that when error compensation is performed, the measurement accuracy of the CMM is improved by >50% compared to the initial state, and no mechanical processing is involved.

Measuring space model and measuring model for six-freedom-degree CMM in parallel

Mathematic Model of Simultaneously Measuring Six-dimensional Parameters by Laser

A Systemic Model for Simultaneously Measuring Three dimensional Rotation Angles of the Linear Guide Track [J]

Volumetric Error Modeling And Analysis For Cnc Machine Tool Based On Multi-Body System

A United Kinematic Calibration Method for a Dual-Machine System

Error-simulation System Modeling and Error Analyzing of an Articulated Arm Coordinate Measuring Machine

Uncertainty Modeling and Evaluation of CMM Task Oriented Measurement Based on SVCMM

Mathematical Model For Linear Symmetry Based On Tolerancing Principle

Numerical Solution of Simultaneous Equations Based Geometric Error Compensation for CNC Machine Tools with Workpiece Model Reconstruction

Full-scale Measurement of CNC Machine Tools

Dynamics behavior analysis of spatial parallel coordinate measuring mechanism with spherical clearance joints

Mathematical Modeling on Linear Orientation Tolerance

Study of variant design of SML-based coordinate measuring machines automatic measurement plan

Research on Mathematical Model of Position Tolerance Based on Tolerancing Principle

Model-based Machine Center Computer Aided On-machine Measurement Strategy

Identification of Kinematic Errors of Five-Axis Machine Tool Trunnion Axis from Finished Test Piece

Precision analysis of series-parallel machine tool based on hierarchy motion function units

Computer integrated work-space quality improvement of the C4 parallel robot CMM based on kinematic error model for using in intelligent measuring

LASSO based compensation method for geometric errors of large coordinate measuring machine

Modeling And Simulation Of Dynamic Errors In A Coordinate Measuring Machine With 3-Dof Laser Interferometer

An efficient method for measuring and identifying geometric and dynamic errors in dual five-axis machine tools