Abstract:Non-circular gears (NCGs) with the advantage of compactness and simple mechanical structure in creating transmitters with variable gear ratios in the industry, so this is a topic that is being studied by many scientists. However, up to now the research usually focuses on NCGs with tooth profile that is an involute circle called involute tooth profile, while other curves have not been applied in the design of the non-circular gears. In this paper, the author proposes to apply the involute ellipse curve in shaping the tooth profile of the pair of elliptical gears with a rack cutter. A rack cutter with tooth profiles is trapezoidal weight is determined from the involute ellipse curve selected as the NCGs teeth. In order not to undercut and tip sharpening when shaping the gear, two algorithms for correcting the base ellipse according to the even distribution of teeth on the gear and undercutting avoidance condition are performed. A numerical computational software module is written according to the theory and the algorithm is implemented to explore the different cases in the design process. The results of this study show that the teeth are evenly distributed over the entire circumference of the ring elliptical gear, overcoming the phenomenon of uneven teeth in geometry and size when using the involute of a circle as other studies have shown. Also, with the tooth profile that is involute ellipse curve, the pressure angle is increased to improve efficiency the transmission capacity of a pair of gears. Therefore, this is the advantage of the new profile in creating variable automatic transmission for different script applications in industries such as the automotive industry or modern medical equipment.

Interference analysis of transition curve for shapping of non-circular gears

The Non-circular Gear's Tip Curve Error Influence upon Its Contact Ratio

Shaping the tooth profile of elliptical gear with the involute ellipse curve

Study on mapping design method of non-circular gear

RESEARCH ON THE MECHANISM AND THE AVOIDANCE METHOD OF CUTTING INTERFERENCE IN NON-CIRCULAR GEAR SHAPING

The Analysis of Proper Meshing Between a Pair of Non-circular Gears Manufactured by Involute Cylindrical Gear Cutter

Research and manufacture of external non-circular gear-pair with improved cycloid profile of the ellipse

Numerical computing method of noncircular gear tooth profiles generated by shaper cutters

Curvature interference characteristic analysis of offset involute cylindrical worm drive

Design and Application of Non-Circular Gear with Cusp Pitch Curve

Computational Design and Optimization of Non‐Circular Gears

Mathematical design and meshing analysis of a new internal gear transmission based on spatial involute-helix curve

Curvature interference characteristic of conical worm gear

Design of and research on a noncircular gear with a high-contact-ratio composite tooth profile

Gearing Principle of Conical Involute Non-Circular Gear and Simulation Model

Numerical Computation of Tooth Profile of Noncircular Gear

Contact stresses and bending stresses analysis of curvilinear cylindrical gears generated by a face-milling cutter with parabolic profile

Generation and Meshing Analysis of a New Type of Double Helical Gear Transmission

Quantitative Analysis on the Non-Similarity of Thermal Deformation of the Gear

Analysis of tooth contact for cylindrical gear with high-order topological modification and misalignment

A Method of Single Flank Engagement to Measure Error of Non-circular Gear