Abstract:The strength enhancement effect of rock and concrete under dynamic loading is one of the significant response characteristics differing from quasi-static loading. Typically, current dynamic constitutive models describe this phenomenon by adopting strain/stress rate dependent functions. In this study, a novel elastoplastic damage constitutive model that captures the dynamic strength increase through the equivalent stress history is developed by coupling the incubation characteristic time (ICT) criterion and the unified strength theory (UST). Specifically, the ICT criterion substitutes the stress history for the strain/stress rate to predict dynamic yield strength of rock and concrete. And the equivalent stress expressed by the UST provide an appropriate selection of the stress history in the ICT criterion under complex stress states. Furthermore, based on the non-associated plastic flow rule and the plastic-damage evolution law, combined with the equation of state, the proposed constitutive model is established and implemented numerically. The dynamic stress-strain curves of granite were reconstructed by a series of numerical tests on a single element, which verified the accuracy of the proposed constitutive model and the reliability of the numerical algorithm by comparing the experimental data. The proposed model was applied to the numerical simulation of dynamic compression-shear tests on inclined sandstone specimens loading by the split Hopkinson pressure bar (SHPB) and fragmentation experiments of single borehole granite specimens under blast loading, respectively. And the experimental dynamic crack patterns on the specimen surface captured by high-speed cameras match the simulated damage distribution well. In addition, several common concrete constitutive models and the proposed model were employed to simulate the dynamic response of reinforced concrete beams under near-field blast loading. The damage patterns and the mid-span residual displacement calculated numerically by the proposed model are more consistent with the experiments than other concrete models. As a conclusion, the proposed model, coupled the ICT criterion and the UST, provides a new perspective and paradigm for characterizing the responses of rock and concrete subjected to intense dynamic loads.

ELASTIC-PLASTIC DAMAGE MODEL OF CEMENT-STABILIZED SOIL

Damage Based Constitutive Model for Predicting the Performance Degradation of Concrete

Predicting Fatigue Damage Growth in Cement-Treated Base Layer Built with Construction and Demolition Waste

Constitutive relations and deformation calculation for unsaturated soils

AN ELASTOPLASTIC MODEL FOR SAND CONSIDERING DISTURBANCE

A damage model for soil-cement mixture

An Updated Elastoplastic Damage Model for Structural Soft-Clays

Dynamic damage constitutive model of cemented sand and gravel material

A constitutive model for unsaturated cemented soils under cyclic loading

An elastoplastic damage model of concrete under cyclic loading and its numerical implementation

Non-linear Elastic Model Considering Soil Structural Damage

A State-Dependent Elasto-Plastic Model for Hydrate-Bearing Cemented Sand Considering Damage and Cementation Effects

A Damage Model of Concrete including Hysteretic Effect under Cyclic Loading

An elastoplastic damage constitutive model for capturing dynamic enhancement effect of rock and concrete through equivalent stress history

Isotropic Elasto-Plastic Damage Mechanics

Dynamic Damage Constitutive Model for Concrete Accounting for the Difference of the Initial Elastic Modulus

An elastoplastic damage constitutive model for frozen soil based on the super/subloading yield surfaces

Elasto-plastic Model of Soil with a Function of Plastic Work As the Hardening Function

A plastic-damage model for concrete

Plastic-Damage Model for Cyclic Loading of Concrete Structures

A coupled elasto-plastic damage model for fine-grained sandstone under triaxial compression and lateral extension loading conditions