Abstract:Most MPC (Model Predictive Control) algorithms used in industries and studied in the control academia use a two-term QP (quadratic programming), where the first term is the weighted norm of the output errors, and the second term is that of the input increments. In this work, a DMC (Dynamic Matrix Control) algorithm that uses three-term QP is developed and studied, where the third term is the weighted norm of the output increments. A relationship between the three-term DMC and the two-term DMC is established; and based on that, ideal closed-loop response curves are derived. These results are useful for the tuning of the three-term DMC. Then, a method for comparing two control methods is proposed and it is shown that the three-term DMC outperforms the two-term DMC. The findings are verified using simulation studies. Finally, the three-term DMC is successfully applied to a 1030 MW ultra-supercritical coal-fired power plant. According to simulation study using the identified model, in comparison to traditional two-term DMC, there is a roughly 10% reduction in the standard deviation of load tracking error for similar control efforts. In real-life tests on the power plant, the performance of the three-term DMC is compared to that of the existing PID controller. The load rate of change increased from 0.8%/min to 1.5%/min while the standard deviation of steam pressure decreased 38%; the standard deviations of the main steam temperature and reheat steam temperature decreased more than 40% with their mean values increased by more than 2 ∘C and 4 ∘C respectively.

A Study of the Predictive Control of a Boiler Combustion System through the Correction of a Forecast Error

Predictive Control and Economic Performance Optimization of CFBB Combustion Process

Repeating Compensation Control System of Steam-gas Temperature Based on Fresh Information Grey Prediction

The Predictive Control Of The Liquid Level Of The Pre-Fractionating Tower Of A Catalyzing Reforming Plant

Model Predictive Control Strategy Based on Prediction Error Feedforward for Superheating Process.

Development of a Three-Term MPC and Its Application to an Ultra-Supercritical Coal Fired Power Plant

Application of Predictive Functional Control for Oxygen Content in Delayed Coking Furnace

Study on predictive control algorithm for horizon control

Study on Simulation of Dynamic Matrix Control for Heating System

Model Simplification and Prediction Error Correction of Dynamic Matrix Control

Dynamic Matrix Control Algorithm on the Boiler Level Integral Process

A practical predictive control algorithm for embedded system and its application

Multiple model-based predictive control for the plant-wide thermal processes

Design and Realization of Combustion Control Strategy for Industrial Boilers under JX-300XP DCS

Dynamic matrix model predictive control of coal feeder speed of a supercritical power plant

Feedforward DMC-PID Cascade Strategy for Main Steam Temperature Control System in Fossil-Fired Power Plant

AN ADAPTIVE PREDICTIVE CONTROLLER AND ITS APPLICATION TO POWER PLANT

Multi-variable Predictive Control of Steam Dryness for Steam-injection Boiler

Dynamic performance analysis and control strategy optimization for supercritical coal-fired boiler: A dynamic simulation

Robust Predictive Control for Boiler-Turbine Coordinated Control System

Truncation error correction by designing input-adjustment-output coefficients for dynamic matrix control based on cubic spline function