Abstract:For the explosive and strongly exothermic direct propene epoxidation with H 2 and O 2 to synthesize propylene oxide, maintaining uniform gas flow and moderate reaction in the packed bed reactor is of prime industrial and scientific significance. Herein, randomly packed beds of spherical particles were simulated with resolved particle 3D computational fluid dynamics (CFD) under industrial conditions. Effect of particle size (i.e., 6, 8 and 10 mm) on performance of gas-phase propene epoxidation was numerically simulated. The fluid flow and temperature fields were fully coupled to the species and reaction distribution, including reactions in the particles and on catalyst surface. Based on the results of velocity, pressure drop, temperature and species distribution, heat transfer together with catalytic performance inside the fixed bed reactor, it is found that PPD-6 (Packed Particle Diameter 6 mm) model has a more uniform flow distribution, higher thermal conductivity and a lower temperature compared with PPD-8 and PPD-10. In addition, as packed particle diameter increases, the heat transfer capacity reduces and the temperature rise increases. As a result, the maximum hot spot temperature for the PPD-6 model is about 3 and 8 K lower than PPD-8 and PPD-10 model, respectively. In addition, the PPD-6 model has a more uniform reaction rate within the particles compared with the PPD-8 and PPD-10 models due to short diffusion path and high mass transfer capacity. Therefore, the PPD-6 model shows superior safety together with optimum conversion and selectivity. This work harbors tremendous referential significance to the design and scale-up of industrial reactors for propene epoxidation.

Decomposition of Cumene Hydroperoxide Catalyzed by Resins in a hree Phase Circulating Fluidized Bed Reactor . Kinetics and Mass Transfer

Liquid Phase Catalytic Oxidation of Cumene

Decomposition of Cumene Hydroperoxide Catalyzed by Resin Catalysts

Catalytic Decomposition Process of Cumene Hydroperoxide Using Sulfonic Resins As Catalyst

Simulation of Fluidized Bed Reactor for Methanol to Olefins(MTO)Process

Cstr Model for P-Xylene Oxidation Reactor

Removal of Dilute VOCs in Air by Post-Plasma Catalysis over Ag-based Composite Oxide Catalysts

Toluene Decomposition by a Two-stage Hybrid Plasma Catalyst System in Dry Air

Cumene autooxidation to cumene hydroperoxide based on a gas-liquid microdispersion strategy

Catalytic Ozonation of Toluene over Spinel Cumn2o4: Influencing Factors, Reaction Mechanism and Pathways

Activation of Peroxymonosulfate by CoS2 Loaded Air-Laid Cloth for Rapid Degradation of Organic Pollutants in a Shallow Continuous Flow Reactor

Resin-Catalyzed Decomposing Reaction of Acetone Cyanohydrin in Organic Solvent

Recombination of Hydrogen and Oxygen in Fluidized Bed Reactor with Different Gas Distributors

Porous-media model based particle-resolved simulation of a fixed bed with olefin catalytic cracking reaction

Insights into the mechanism of cumene catalytic oxidation using ionic liquid [Bmim]OH

CFD-aided enhancement of propylene oxide decomposition in a tubular reactor with a corrugated cooling jacket

Numerical calculation of flow and reaction safety with different particle sizes in a fixed bed reactor for propene epoxidation with H 2 and O 2

Effects of Preparation Procedure in Sol–gel Method on Performance of MoO3/SiO2 Catalyst for Liquid Phase Epoxidation of Propylene with Cumene Hydroperoxide

Preparation of OCM Catalysts by Mixing Method and Surface Characterization

Decomposition of Nitrous Oxide over a Low‐cost Catalyst

Optimization of methane catalytic decomposition in a fluidized bed reactor: A computational approach