Abstract:Zhundong coal represents a large portion of China's future energy supply, because of the large reserve capacity. Although Zhungdong coal has low ash and good ignition characteristics, it also contains large amounts of sodium, which can foul and corrode heat-transfer surfaces. For economically viable use of Zhundong coal or other high-alkali coals, the alkali release must be mitigated prior to or within the burner. This can be done either by washing the coal,, using sorbents to trap the sodium, or a combination of these methods. Additive influence on the release of sodium over the entire coal combustion process was measured using a calibrated laser-induced breakdown spectroscopy (LIBS) technique. The additives used were alumina, silica, and five mineral sorbents comprising blends of silica, alumina, and various other inorganic compounds; different coal/sorbent ratios were assessed (1%, 3%, and 5% additive, by weight). During the three stages of sample coal combustion, it was found that the first stage, devolatilization, releases only similar to 1.2% of the total sodium; the char combustion stage releases similar to 28% of the total sodium; and the ash stage releases the vast majority of sodium (similar to 70%). The peak instantaneous release rate occurs during the char combustion stage. The sodium retention efficiency for all of the sorbents tested was lowest during the devolatilization stage and there was no appreciable change to the duration of the stage. Sodium retention efficiency was greatest in the ash stage, primarily due to the sheer amount of sodium released during this stage. The ash stage was effectively shortened, in proportion to the retention efficiency of the sorbent. The sodium release during the char combustion stage showed an obvious difference in profile for the various types of sorbent tested. Alumina was the least effective in reducing sodium release and retained the characteristic shape of sodium release from raw coal during this stage. Silica and sepiolite demonstrated similar sodium release profiles, which were markedly different than the sodium release profiles of either alumina or aluminosilicate mineral samples. Time-resolved sodium retention plots show an enhancement in the sodium retention by alumina during the char burnout. The addition of sodium sorbent to the coal extended the duration of the char burnout stage, which may indicate that the reduction of available sodium reduces the alkali catalysis of the char decomposition.

EXPERIMENTAL STUDIES ON THE BEHAVIOUR OF SODIUM OF COAL IN THE INITIAL STAGE OF COMBUSTION

Effect of CO2/H2O on the Incipient Ultrafine Particulate Matter Formation in Oxy-fuel Combustion of High-Sodium Lignite

Effects of Na and Fe on the Formation of Coal-Derived Soot in a Two-Stage Flat-Flame Burner

Measurement and Numerical Simulation of Ultrafine Particle Size Distribution in the Early Stage of High-Sodium Lignite Combustion

In Situ Measurements of the Release Characteristics and Catalytic Effects of Different Chemical Forms of Sodium during Combustion of Zhundong Coal

Situation of Combustion Utilization of High Sodium Coal

Investigation on Release and Migration Characteristics of Sodium During the Combustion of High-Sodium Coal with Phosphorite

STUDY OF OCCURRENCE MODE OF SODIUM EFFECT ON THE SUBMICRON ASH PARTICLE FORMATION DURING COAL COMBUSTION

Investigation on Sodium Fate for High Alkali Coal During Circulating Fluidized Bed Combustion

Release and Migration Characteristics of Sodium and Potassium in High Alkali Coal under Oxy-Fuel Fluidized Bed Combustion Condition

Effect of combustion heat on release and transformation of the sodium during Zhundong coal ash-forming process

EFFECTS OF MINERALS AND SODIUM ADDITION ON NITROGEN RELEASE DURING COAL COMBUSTION

Measurement of atomic sodium release during pyrolysis and combustion of sodium-enriched Zhundong coal pellet

Multivariate Statistical Analysis on the Behaviour of Sodium of Coal in the Initial Stage of Combustion

SO2 and NO Emissions During Combustion of High-Alkali Coal over a Wide Temperature Range: Effect of Na Species and Contents

Inhibition of Sodium Release from Zhundong Coal Via the Addition of Mineral Additives: Online Combustion Measurement with Laser Induced Breakdown Spectroscopy (Libs)

Numerical Study of HCl and SO2 Impact on Sodium Emissions in Pulverized-Coal Flames

Experimental Investigation of Gaseous Sodium Release in Slag-Tapping Coal-Fired Furnaces by Spontaneous Emission Spectroscopy

Alkali metal emissions in an early-stage pulverized-coal flame: DNS analysis of reacting layers and chemistry tabulation

Migration and Transformation of Sodium During Staged Coal Combustion of Zhundong Coal and Influence of Carbon Coating

Correlation of sodium releasing and mineral transformation characteristics with ash composition of typical high-alkali coals