Abstract:The tempering process of plate glass involves rapidly cooling the high-temperature glass using an array of impinging air jets, inducing desired stress during cooling. Consequently, the formation of tempering stress results from the coupled interaction among flow, heat transfer, and stress. However, most previous studies have commonly neglected the influence of the flow field by assuming a uniform and constant distribution of heat transfer coefficients at different positions on the glass plate, which deviates from actual situations. This study employed a fluid-thermal-structural coupled simulation approach to predict the non-uniform residual stress distribution in tempered glass and investigate the interaction mechanisms among flow, heat transfer, and stress. Simultaneously, to validate the reliability of the method and model, this study experimentally investigated the single-nozzle jet impingement cooling for glass tempering. The study concluded that the simulation results were consistent with the experiment. Subsequently, a comparative analysis was performed between the fluid-thermal-structural coupled simulation results based on real boundary conditions and the thermal-structural coupled simulation results based on ideal uniform heat transfer coefficient boundary conditions. The results revealed non-uniform distributions of both heat transfer coefficient and temperature due to varying localized flow characteristics. Consequently, the ratio of surface compressive stress to internal tensile stress along the width direction of the glass was not a fixed value but ranged from 1.63 to 2.38. Furthermore, significant differences were observed in the stress distribution under the simulations of fluid-thermal-structural coupling and thermal-structural coupling. Therefore, it is recommended to employ the fluid-thermal-structural coupling method when predicting localized stress distribution.

Calculation Method Of Failure Prediction For Thermal Tempered Glass

Finite Element Analysis on Non-Isothermal Glass Molding

A Stochastic Analysis of Glass Crack Initiation under Thermal Loading

Discussion of Allowable Stress of Glass-lined Equipment

Numerical Simulation of Glass Bottle Forming Process

Fracture Mechanics Analysis of Thermally Tempered Glass Plate: Fracture Induced by an Embedded Crack

Dynamic three-dimensional stress prediction of window glass under thermal loading

NUMERICAL PREDICTION ON THE FIRST BREAKING TIME OF GLASS IN FIRE CONDITIONS

Comparative Study on Crack Initiation and Propagation of Glass under Thermal Loading

Study on the Stress and Failure Strength Around the Hole in Point Supported Glass Panels

Simulating the thermal response of glass under various shading conditions in a fire

Analysis On The Temperturature Fields And Thermal Stresses Of Laminated Glass Unit Of Glass Curtain Wall

Development of a dynamic model for crack propagation in glazing system under thermal loading

Analysis on the Temperature Fields and Thermal Stresses of Laminated Glass Unit of Point-Supported Glass Curtain Wall

Assessment Of Monte Carlo Method In Calculating Radiative Heat Transfer Through Glass

Thermal Shock Effect on the Glass Thermal Stress Response and Crack Propagation

Coupled fluid-thermal-structural analysis during the air cooling for glass tempering

033 Crack initiation and path prediction of float glass with various constrain conditions under thermal loading

FAILURE STRESS ANALYSIS AROUND THE HOLE IN POINT-SUPPORTED GLASS PANELS

Damage Analysis of Glass-to-Metal Diffusion Welded Joints

Temperature and Thermal Stress Simulation of Window Glass Exposed to Fire