Abstract:Flapping flight has undoubtedly played a significant role in many of the aeronautical engineering achievements in the past several centuries. Flapping motions of wings/fins are used by animals (such as birds, insects and bats) to generate lift or thrust to keep them aloft in the surrounding fluid. Researches in this area are not only motivated by the fundamental interest of understanding the mechanism of flapping flight, but also the development of Micro Air Vehicles (MAVs) based on biomimetics. In this lecture, we will address our efforts towards both experimental studies and virtual testing of flapping flight with our High End Digital Prototyping (HEDP) system. The aim of our research is to use physical and biological models to drive the engineering design of these vehicles. Firstly, two types of flapping-wing Unmanned Air Vehicles (UAVs) with spatial four-bar drive mechanism will be presented, including the wind tunnel experiment and prototype flight test results. Secondly, various computation approaches have been adopted to simulate the flapping motions, including traditional moving mesh techniques based on Arbitrary Lagrangian Eulerian (ALE) formulation, and Lattice Boltzmann method with immersed boundary methods. For a single wing-system, we have investigated the influences of various parameters on both the symmetric flapping and asymmetric flapping with bird-like or turtle-like flapping mode. For a tandem wing system, we have investigated the interaction between the hind wing and the vortex shedding off the fore wing and learned how to utilize the flow mechanism to achieve better aerodynamic performances. Moreover, Dynamic Mode Decomposition (DMD) algorithm has been adopted to reveal the underlying physics due to its capability and accuracy in analyzing the complex transient systems. Finally, the flight control design of a dragonfly-like Flapping Wing Micro Aerial Vehicle (FWMAV) is presented, which has incorporated a Linear-Quadratic Regulator (LQR) method and an Iterative Learning Tuning (ILT). In general, we expect that these virtual testing by computational simulations and flight control can drive the design of our next generation flapping-wing UAVs in the future.

Measuring the Body Vector of A Free Flight Bumblebee by the Reflection Beam Method

Quantitative Analysis of the Morphing Wing Mechanism of Raptors: IMMU-based Motion Capture System and Its Application on Gestures of a Falco Peregrinus

Divergent-Ray Projection Method for Measuring the Flapping Angle, Lag Angle, and Torsional Angle of A Bumblebee Wing

Measuring the Body Position, Attitude and Wing Deformation of a Free-Flight Dragonfly by Combining a Comb Fringe Pattern with Sign Points on the Wing

MEASUREMENT AND FLOW VISUALIZATION OF A BEATING BUMBLEBEE WING

A Scanning Projected Line Method for Measuring a Beating Bumblebee Wing

Measuring Wing Kinematics, Flight Trajectory and Body Attitude During Forward Flight and Turning Maneuvers in Dragonflies

Measurement on Camber Deformation of Wings of Free-flying Dragonflies and Beating-flying Dragonflies

The Free Surface Ultrasonic Measuring and Checking Robot Kinematics Analysis

A New Boresighting Method of the Aircraft Gun Using a Laser Tracker

Towards Virtual Testing of Flapping Flight

Measurement of wing motion, deformation, and inertial forces of a biomimetic butterfly

High‐resolution Method for Measuring the Torsional Deformation of a Dragonfly Wing by Combining a Displacement Probe with an Acousto‐optic Deflector

Smooth 3D Trajectory Segmentation for Flying Insects

Direct Measurements of the Wing Kinematics of a Bat in Straight Flight

Simultaneous Measurement of the Shape and Thickness of a Dragonfly Wing

Optical Measurement of the Deformation, Motion, and Generated Force of the Wings of a Moth, Mythimna Separata (Walker).

Orthogonal-polarization compensation method for measuring unsteady vertical force of a bumblebee in a wind tunnel

Monocular In-flight Measurement of Airfoil Deflections

Two-dimensional, Noncontact Measurement of the Natural Frequencies of Dragonfly Wings Using a Quadrant Position Sensor

Measuring the Wing Kinematics of a Moth (helicoverpa Armigera) by a Two-Dimensional Fringe Projection Method