Abstract:Time synchronous averaging has been widely used for machinery fault diagnosis. However, it cannot reveal signal characteristics accurately in conditions of speed fluctuation and no tachometer due to the phase accumulation error. In this paper, an improved dynamic-time synchronous averaging method is proposed to extract the periodic feature signal from the fluctuated vibration signal for fault detection when no tachometer signal is available. In this method, empirical mode decomposition, dynamic time warping, and time synchronous averaging are performed on gear vibration signals to detect fault characteristic information. First, empirical mode decomposition is performed on the vibration signal and a series of intrinsic mode functions are produced. The sensitive intrinsic mode functions providing fault-related information are selected and reconstructed and the corresponding envelop signals are equal-space intercepted. Then, the phase accumulation error among the envelop signal segments is estimated by the dynamic time warping, which is further used to compensate the phase accumulation error between the intrinsic mode function segments of the reconstructed signal. Finally, the compensated intrinsic mode function segments are averaged to obtain the feature signal. Simulation analysis shows the advantages of the proposed method in extracting faulty feature signal from speed fluctuation signal without tachometer and identifying gear fault. Experiments with both normal and faulty gear were conducted and the vibration signals were captured. The proposed method is applied to identify the gear damage and the diagnosis results demonstrate its superiority than other methods.

Amplitude Correction Approach Using Average of Several Points in Discrete Spectrum for Analyzing the Dynamic Signal of Rotating Machinery with Varying Speed

An approach for amplitude correction in line spectrum

Rotating Machinery Signal Analysis Method Based on EEMD and Spectrum Correction

A New Algorithm Of Time Domain Synchronous Averaging Analysis

Application of an improved dynamic time synchronous averaging method for fault diagnosis in conditions of speed fluctuation and no tachometer

The Spectrum Analysis Technology and Feature Extraction of Rotor System Steady and Speeding-Change Process

A Time-Frequency Spectral Amplitude Modulation Method and Its Applications in Rolling Bearing Fault Diagnosis

Spectral Correlation Density Analysis on Bearing Point Defect Diagnosis

Dynamic signal analysis for speed-varying machinery: A review

Normalizing Vibration Signals with a Novel Piecewise Power Fitting Method for Intelligent Fault Detection of Rotating Machinery

Application Of Speed Transform To Diagnosis Of Rotating Machinery With Varying Speeds

Stockwell Transform Spectral Amplitude Modulation Method for Rotating Machinery Fault Diagnosis

Earlier Fault Diagnosis of Nonsynchronous Feature Signal of Gearbox

A non-linear time–frequency tool for machinery fault diagnosis under varying speed condition

Modulation Signal Bispectrum Slice Overall Average Feature Extraction of Low-speed Reciprocating Bearing Faults

Restoring Statistical Cyclicity in Rotating Machinery Vibrations Using the Oscillatory Almost-Cyclostationary Model

A review and strategy for the diagnosis of speed-varying machinery

Research on Algorithm to Compute Rotating Speed of Rotating Machinery Based on Digital Differential and Averaging Pulses

Subband Averaging Kurtogram with Dual-Tree Complex Wavelet Packet Transform for Rotating Machinery Fault Diagnosis

A parameter-adaptive ACMD method based on particle swarm optimization algorithm for rolling bearing fault diagnosis under variable speed

An Improved Multipoint Optimal Minimum Entropy Deconvolution Adjusted Method for the Diagnosis of Rotating Machinery under Variable Speed Conditions