Abstract:With the recent advances in autonomous vehicles, there is an increasing need for sensors that can help monitor tire–road conditions and the forces that are applied to the tire. The footprint area of a tire that makes direct contact with the road surface, known as the contact patch, is a key parameter for determining a vehicle's effectiveness in accelerating, braking, and steering at various velocities. Road unevenness from features such as potholes and cracks results in large fluctuations in the contact patch surface area. Such conditions can eventually require the driver to perform driving maneuvers unorthodox to normal traffic patterns, such as excessive pedal depressions or large steering inputs, which can escalate to hazards such as the loss of control or impact. The integration of sensors into the inner liner of a tire has proven to be a promising method for extracting real-time tire-to-road contact patch interface data. In this research, a tire model is developed using Abaqus/CAE and analyzed using Abaqus/Explicit to study the nonlinear behavior of a rolling tire. Strain variations are investigated at the contact patch in three major longitudinal slip driving scenarios, including acceleration, braking, and free-rolling. Multiple vertical loading conditions on the tire are applied and studied. An intelligent tire prototype called KU-iTire is developed and tested to validate the strain results obtained from the simulations. Similar operating and loading conditions are applied to the physical prototype and the simulation model such that valid comparisons can be made. The experimental investigation focuses on the effectiveness of providing usable and reliable tire-to-road contact patch strain variation data under several longitudinal slip operating conditions. In this research, a correlation between FEA and experimental testing was observed between strain shape for free-rolling, acceleration, and braking conditions. A relationship between peak longitudinal strain and vertical load in free-rolling driving conditions was also observed and a correlation was observed between FEA and physical testing.

Diver-tire-vehicle closed loop system based on neural networks

Learning-Based On-Track System Identification for Scaled Autonomous Racing in under a Minute

Neural Network Tire Force Modeling for Automated Drifting

Drift Control of Autonomous Vehicle Under Extreme Condition Based on Neural Network Tire Model

A Direct Slip Ratio Estimation Method based on an Intelligent Tire and Machine Learning

Personalized Driver Model and Its Application to Vehicle Testing

The Applications of Artificial Neural Networks to the Vehicle Tyre Characteristics

Autonomous Drifting with 3 Minutes of Data via Learned Tire Models

Experimental Evaluation of Tire Tread Wear Detection Using Machine Learning in Real-Road Driving Conditions

Structure Optimization of Pneumatic Tire Using an Artificial Neural Network

Tire Force Estimation in Intelligent Tires Using Machine Learning

Physics Embedded Neural Network Vehicle Model and Applications in Risk-Aware Autonomous Driving Using Latent Features

The Simulation Study of the Car Curve Traveling Traction Control System

Optimal Slip Ratio Tracking Integral Sliding Mode Control for an EMB System Based on Convolutional Neural Network Online Road Surface Identification

A high-performance neural network vehicle dynamics model for trajectory tracking control

Tire Slip Angle Estimation based on the Intelligent Tire Technology

A Data-Driven Framework for Tire Force Estimation of Distributed Electric-Drive Vehicles

Optimization of the tire ice traction using combined Levenberg–Marquardt (LM) algorithm and neural network

Application of Transient- and Steady-State Acceleration Signals in Intelligent Tires

Intelligent Tire Prototype in Longitudinal Slip Operating Conditions