Abstract:Calculating wind resistance is an important process in the design of highway bridges. The current codes of many countries include different rules and formulas regarding the calculation of wind resistance. In this paper, the transverse-direction wind loads on long-span girder bridges with tall piers were calculated using six codes from different countries under various terrain, pier height, and girder length conditions. The pier-bottom shear force and moment results of transverse wind loads calculated using these six codes were compared with those obtained using the buffeting frequency domain method. Results showed that, in Class B terrain, wind load results predicated on China's 2004 general codes for the design of highway bridges and culverts, China's 2004 wind-resistant design specifications for highway bridges, Japan's 2007 wind-resistant design manual for highway bridges, and Part 2 of Britain's 2006 steel, concrete, and composite bridge specifications for loads resembled each other closely. Some difference was found to exist among Classes A, C, and D terrain. The 2007 AASHTO LRFD bridge design specifications and China's 2001 load codes for the design of building structures showed significant differences from the other four codes on all kinds of terrain. The applicability of the wind load rules in the AASHTO LRFD bridge design specifications to long-span girder bridges with tall piers merits further discussion. China's wind load calculations of load code for the design of building structures mainly depended on the empirical parameters of architectural structures with large dimensions, and had limited applicability to bridge structures. For long-span girder bridges with tall piers, such as bridges with span length-to-width or -depth ratios exceeding 30, or pier height-to-transverse-width ratio exceeding 10.7, the wind load calculated using these codes was generally underestimated due to the neglect of the effects of aeroelastic forces, which must be taken into account in the design of these kinds of bridges. DOI: 10.1061/(ASCE)BE.1943-5592.0000316. (C) 2012 American Society of Civil Engineers.

Along-wind Lateral Acceleration and Inertia Wind Loads of Long-span Bridges

Simplified Calculation of Equivalent Wind Loads of High Pier Continuous Rigid Frame Bridge in Double Cantilever State

Methods of calculating wind loads on long-span girder bridges with tall piers and comparison of values

Analysis and Comparison on Wind Load of Long Span Girder Bridges with High Pier

Dynamic characteristics of CFRP cables under lateral wind load

Aeroelastic model study of cantilever skywalk bridge

Numerical Study on Static Aerodynamic Coefficients Aerodynamic Interference Effects of the Box girder Section of Continuous Rigid Frame Bridge with Close Twin Deck

Development of joint probability distribution of wind speed and direction using long-term monitoring data

Dynamic analyses of long-span cable-stayed and suspension cooperative system bridge under combined actions of wind and regular wave loads

Study of Dynamic Behavior and Influences Induced by Structural Parameter Variations of Self-Anchored Suspension Bridge

Wind Load Assessment with the JPDF of Wind Speed and Direction Based on SHM Data

Calculating Method and Experimental Research on Lateral Load Distribution of Transversely Strengthened Hollow Slab Bridge

Bridge design basic wind speed based on the joint distribution of wind speed and direction

Wind-induced Load Capacity Analysis and Parametric Study of a Long-Span Steel Arch Bridge under Construction

Influences of Wind Load on the Stability of Concrete Filled Steel Tube Arch Bridge in Construction

Numerical study of wind characteristics at a long-span bridge site in mountain valley

Aerostatic stability of long-span cable-stayed bridges: Parametric study

Design wind loads for transmission towers with cantilever cross-arms based on the inertial load method

Wind-Induced Phenomena in Long-Span Cable-Supported Bridges: A Comparative Review of Wind Tunnel Tests and Computational Fluid Dynamics Modelling

Buffeting analysis of long-span twin-box cable-stayed bridge during construction

3-D wind load and wind-induced response of X-shaped tall building