Abstract:This study aims to propose a model for dynamically simulating the online-refueling process in pebble-bed reactor (PBR) using MCNPX. PBR has a special feature of online-refueling which can greatly reduce the outage time and enable a higher burnup in spent fuel. However, this feature also results in the dynamical fuel movements which may significantly increase the difficulty and the computational time in computer simulation. Therefore, an appropriate model is necessary to be proposed to simulate the burnup characteristics of online-refueling and to reduce the computational time simultaneously. All the calculations in this study were performed using MCNPX 2.7.0 with the ENDF/B-VII continuous energy nuclear data library. The PBR model was built according to the core design of HTR-10 but adopted some reasonable assumptions. The refueling process was emulated by utilizing the fuel loading scenario of the once through then out (OTTO) in combination with the layer-mixed-shell fuel movement. Additionally, the layer-mixed-shell fuel movement considered the concept of fuel channels, where the fuel pebbles only move in the same fuel channel, such that the burnup characteristics of fuel pebbles in both radial and axial direction can be identified separately. The core was divided into 9 fuel zones with a fixed volume and 3 fuel channels with a variety of fuel zones. Furthermore, the number of fuel zones in each fuel channel was determined based on the relative residence time of fuel pebbles in the core. The results revealed that the core can achieve an equilibrium fuel cycle after refueling several times, and after that all the core characteristics can nearly maintain unchanged between different cycles. Although the refueling process was modeled based on the OTTO fuel loading scenario instead of the multi-pass one, the discharged burnup can still reach the target burnup of the spent fuel for HTR-10, i.e. 72 GWd/tHM. In addition, the average discharged burnup under the equilibrium fuel cycle is approximate to 80 GWd/tHM, which also coincides the design value of the spent fuel for HTR-10. Therefore, the layer-mixed-shell movement model can consider the fuel movements in either radial or axial directions simultaneously and enable a more accurate prediction to the real refueling process of HTR-10 than our previous studies.

Improved NHR-10 Core Design

Fuel Management of the HTR-10 Including the Equilibrium State and the Running-in Phase

Fuel Management of HTR-10

In-Core Fuel Management Design of Large Power PWR

Research on In-Core Fuel Loading Optimization of PWR Nuclear Power Plants with Burnable Absorber Fuel

Research and Development on the First-loading Coated Fuel Particles for the 10 MW High Temperature Gas-cooled Reactor

Optimization of Spatial Structure Designs of Control Rod Using Monte Carlo Code RMC

Core design and reactivity control optimization of small lead-cooled reactor LFR-180

Optimization of MOX Fuel Cycles in Pebble Bed HTGR

A Comprehensive Study of the 14C Source Term in the 10 MW High-Temperature Gas-Cooled Reactor

Research on the Fuel Loading Patterns of the Initial Core in Chinese Pebble-Bed Reactor HTR-PM

Optimization of a Fuel Assembly for Supercritical Water-Cooled Reactor CSR1000

Physical Analysis of the Initial Core and Running-In Phase for Pebble-Bed Reactor HTR-PM

Multiobjective Genetic Algorithm Strategies for Burnable Poison Design of Pressurized Water Reactor

Reactor Physics of Long-Cycle Nuclear Heating Reactors

Research on Application of Burnable Poison in Pebble Bed HTR

Core Optimization for Extending the Graphite Irradiation Lifespan in a Small Modular Thorium-Based Molten Salt Reactor

Design and Manufacture of the Fuel Element for the 10 MW High Temperature Gas-Cooled Reactor

Burnup computations of online-refueling process for pebble-bed reactors using layer-mixed-shell fuel movement model

Effects of the Central Graphite Column Dimension and Pebble Size on Power Density Distribution in Annular Core Pebble‐bed HTR

Optimization of Preparation Process and Study on the Properties and Microstructures of Nuclear Natural Graphite Powder for HTR Pebble Fuel Elements