Abstract:The degradation of the dielectric layer is a common issue in dielectric barrier discharge (DBD). The performance of DBD devices may suffer from instability due to potential corrosion of the dielectric layer caused by discharge, which could even result in structural failure. To gain a comprehensive understanding of the degradation of DBD devices during discharge, the evolution of the performance of DBD devices with various dielectric materials over time is studied. Periodic patterns are found to form on the dielectric surface along the edge of the high-voltage electrode. The electrical data, emission spectra, and surface morphologies of DBD devices with three different dielectric materials, namely ceramics, glass, and PCB, are obtained during an eight-hour discharge. The electrical and thermodynamic characteristics of DBD devices with the three dielectric materials are found to initially decrease by about 20%similar to 40%. Subsequently, they remain stable in devices with ceramics and PCB dielectric layers but increase in devices with glass dielectric layers until the end. Surface morphologies reveal that periodic patterns consisting of metal accumulations, etching pits, and metal depositions form on the surfaces of ceramics, glass, and PCBs, respectively. Some organic compounds vaporize from the surface of PCBs. The deposition, etching, and vaporization could be reasons for changes in the electrical and thermodynamic characteristics. It shows that degradation occurs not only in organic dielectrics like polymers but also in inorganic dielectrics such as ceramics and glass. To enhance stability and prevent potential failures and overestimations, electrical and optical measurements could be utilized as diagnostic methods in applications involving DBD devices.

Computational Development of the Dielectric Barrier Discharge

Study of Mechanism of Dielectric Barrier Discharge Photography

Electrical Modeling of Dielectric Barrier Discharge Considering Surface Charge on the Plasma Modified Material

EFFECT OF EXPOSURE ON THE DIELECTRIC BARRIER DISCHARGE PHOTOGRAPHY

One-Dimensional Modeling of Dielectric Barrier Discharge in Xenon

Applications of Dielectric Barrier Discharge Photography Technology

Experimental Research on Microdischarge Characteristics of DBD

Study of Characteristics of Coplanar Dielectric Barrier Discharge

Transition from Glow-Like to Streamer-Like Discharge in Atmospheric Pressure Dielectric Barrier Discharge Controlled by Variable Dielectric Surface Layer Permittivity

Investigation of Dielectric Barrier Discharge in Air for Materials Surface Modification by Optical Emission Spectrometry

One-Dimensional Simulation of Low Pressure Xenon Dielectric Barrier Discharge

Simulation Study on the Mechanism of Wire– Cylinder Air Dielectric Barrier Discharge Under Atmospheric Pressure

Classification of Dielectric Barrier Discharges Using Digital Image Processing Technology

Axial and Radial Evolution of the Dielectric Barrier Discharge in Helium at Atmospheric Pressure

Particle Simulation of Filamentary Structure Formation in Dielectric Barrier Discharge

Dielectric Barrier Discharge and Its Applications

One-Dimensional Simulation of Dielectric Barrier Glow Discharge in Atmospheric Pressure Ar

Investigation of Surface Charge Distribution and Its Influence on Characteristics of Dielectric Barrier Discharge

Study of Homogeneous DBD with Fine Wire Meshes and PET Films in Air at Atmospheric Pressure

The Time Evolution of Electrical and Thermodynamic Characteristics of Surface Dielectric Barrier Discharge Caused by Dielectric Degradation

Two-dimension Simulation of Small Scale Dielectric Barrier Discharge in Argon