Abstract:Industrial robot manipulators are widely used in manufacturing processes. These robots are designed to carry out repetitive tasks. For safety concerns, they are often kept in cages, humans control them remotely via separate interfaces, physical Human-Robot Interaction (pHRI) is forbidden. Shortly all this is going to change radically. Next generation of the robots are expected to interact with humans directly. They will collaborate with people in applications such as assisted industrial manipulation, elder care, rehabilitation etc. To enable interaction between humans and robots, human safety has to be guaranteed. One of the pioneers in robot safety, Prof. Alessandro De Luca in his keynote speech at the International Conference on Robotics and Automation (ICRA) 2015, introduced the hierarchy of control architecture in pHRI which puts safety as the fundamental feature of a robot that has to work close to human beings (See Figure 1). Without safety, coexistence and collaboration can not take place. Collaboration Coexistence Safety Figure 1: Hierarchy of control architecture, reproduced with reference to [18] Current state of the art safety strategies include motion planning and collision detection and reaction. At high level control, motion planning is always preferred, as it produces natural movement of the robot. But once the planning fails to find a feasible trajectory to avoid collision, the robot is likely to collide with the object in the environment. Then it is crucial to detect the collision and react to it as soon as possible. This thesis focus on the augmentation of the current safety layer of the robot control structure by adding on a smart emergency braking layer. The braking is initiated by the prediction of the braking trajectory. The thesis proposed a trajectory prediction framework combined with the braking controllers. Two different braking controllers are tested in combination with the trajectory prediction scheme. Both results in collision avoidance of the robot in real-time simulation. One overall collision avoidance scheme has been tested successfully on the DLR Lightweight Robot III (LWR-III). In the test, the robot successfully initiated braking to avoid the collision.

Study On Real Time Autonomous Collision Avoidance In Telerobotic Systems

Whole-body Dynamic Collision Avoidance with Time-varying Control Barrier Functions

Real Time Collision Free Motion Control In Telerobotic Systems

Dynamical Obstacle Avoidance of Task- Constrained Mobile Manipulation Using Model Predictive Control

A Robot Collision Avoidance Scheme Based on the Moving Obstacle Motion Prediction

Real-Time Path Planning for Mobile Robots

An Autonomous Robot for Collision-Free Person Following Through Model Predictive Control

Real-Time Navigation In Dynamic Human Environments Using Optimal Reciprocal Collision Avoidance

Unified Contact Model and Hybrid Motion/force Control for Teleoperated Manipulation in Unknown Environments

Collision Avoidance and Path Point Tracking Control for Underactuated Unmanned Surface Vehicles with Unknown Model Nonlinearity

Collision risk assessment and automatic obstacle avoidance strategy for teleoperation robots

Real-time Collision Avoidance for Robot Manipulators by Braking Trajectory Prediction

Cooperative Target Enclosing Control for Multiple Unmanned Surface Vehicles with Unknown Dynamics and Safety Assurance

Experimental Assessment of a Vision-Based Obstacle Avoidance Strategy for Robot Manipulators: Off-line Trajectory Planning and On-line Motion Control

A Multi-Switching Tracking Control Scheme for Autonomous Mobile Robot in Unknown Obstacle Environments

Multi-mode Collision Avoidance Closed-Loop Control System

Adaptive Safety-critical Control with Uncertainty Estimation for Human-robot Collaboration

On-line collision avoidance for collaborative robot manipulators by adjusting off-line generated paths: An industrial use case

Robot obstacle avoidance system using deep reinforcement learning

Event-Based Adaptive Fault Tolerant Control and Collision Avoidance of Wheel Mobile Robots With Communication Limits

Collision avoidance analysis of human–robot physical interaction based on null-space impedance control of a dynamic reference arm plane