Abstract:The theoretical analysis of the DC K-modulation of quadrupole for the beam-based alignment method is presented. It is shown that the shift of the orbit, when the focussing strength of one quadrupole magnet is changed, can be described by the perturbed or unperturbed linear lattice parameters. The beam-based alignment system is constructed using DC K-modulation of quadrupole. In order to use the beam-based alignment method one must be able to individually adjust the strength of the quadrupole magnet. So, a switchable shunt resistor is installed on quadrupole to bypass 1% -2.5 % magnet current and some solid-state relays are used to switch the shunt resistor in this beam-based alignment system. To improve the measurement accuracy, two methods are used. First method is that beam positions in measured quadrupole magnet are moved by local bump of beam closed orbit using the corrector magnets. Second method is that the root-mean-square of difference in closed orbit is fitted by a parabola function. The system can be not only used to position the beam in the magnetic center of quadrupoles, but also to measure the beta function in quadrupole magnets. Some preliminary measurement results are given for Hefei 800MeV electron storage ring. These experimental results show that this system is valid to position the beam to the center of the quadrupole magnets and measure the beta function at Hefei Light Source.

Development of Beam-Based Alignment System Using a Switchable Shunt Resistor for HLS

Methods of Measurement for the Beam-Based Alignment System in HLS

Recent research advances of beam diagnostic system for HLS

Measurement and Research of Beam-Based Alignment with AC K-Modulation at HLS

Design of Control for Beam Based Alignment System at HLS

Measurement of Beam-Based Magnetic Center of Quadrupoles and Global Orbit Correction for HLS

Design And Simulation Of Beam Position Monitor For 20omev Linac In Hls

HLS Turn-by-Turn System and Its Application

Development Of A Split Photon Beam Position Monitor For Hls

Design and Simulation of Beam Position Monitor for 200 MeV Linac in HLS

Several New Beam Measurement Systems for HLS

Preliminary Study On Measurement Of Magnetic Center Of Quadrupoles Using Quadrupole Shunt For Hefei Storage Ring

Development of HLS 800 MeV linac phase control system

A Method to Calibrate Beam Position Monitor at HLS 200 MeV Linac

Photon Beam Position Monitor with Spring System in HLS

DESIGN OF CAVITY BEAM QUADRUPOLE MOMENT MONITOR AT HLS

Calibration of Turn-by-turn System and New Testing Results

The beam loss monitoring system for HLS storage ring

Linear Optics Compensation of the Superconducting Wiggler in HLS

Photon Beam Position Monitor Using Beam Profile System for HLS

Development of A Modified Quasi-periodic Undulator for HLS