Abstract:The operation of space robotic arms in orbit is one of the most extensively applied technologies in current space in-orbit services.However,the significant coupling effect of position and attitude between the floating base and the arm during operations presents new challenges for the design of control systems.To address the integrated modeling and control problems of position and attitude in multi-rigid body systems,this paper improves the dual quaternion-based integrated modeling and control method,making it applicable to multi-rigid body systems.This method not only accurately describes complex mechanical relationships but also effectively manages the coupling problems of position and attitude within a unified mathematical framework,greatly facilitating the subsequent design of integrated control systems for position and trajectory.Initially,leveraging the hinge model,the paper establishes recursive relationships for velocity and acceleration between the hinges and the arm in dual quaternion form.Then,using the force-torque transmission relationship between the hinges and the arm,a recursive form of the inverse dynamics equation is established to ease the design and analysis of control systems.Following this,a matrix form of the integrated position and attitude forward dynamics equation is derived.The paper then discusses the dynamics modeling issues related to actuators,such as thrusters and control moment gyroscopes.It addresses the integrated control problems of position and attitude for both the robotic arm and the floating base.Finally,dynamics modeling and control simulations for a composite entity comprising a six-degree-of-freedom robotic arm and a floating base are conducted.The dynamics simulation results confirm the correctness of the proposed dynamics modeling method,and the control simulation demonstrates that the control system can quickly counteract the disturbance forces and torques generated by the movement of the robotic arm on the base,proving the effectiveness and feasibility of the proposed control method.

Robust Control of Spacecraft-Referenced End-Point Motion of Space-Based Robot System with Prismatic Joint

Dynamical Obstacle Avoidance of Task- Constrained Mobile Manipulation Using Model Predictive Control

Robust Control for Spacecraft Attitude Tracking under Multiple Physical Limitations with Guaranteed Performance

Unified Motion/Force/Impedance Control for Manipulators in Unknown Contact Environments Based on Robust Model-Reaching Approach

Robust coordinated control of a dual-arm space robot

Robust Control Strategy for Reactionless Manoeuvring of a Dual-Arm Space Manipulator

Study on Non-holonomic Cartesian Path Planning of a Free-Floating Space Robotic System.

Adaptive Zero Reaction Motion Control for Free-Floating Space Manipulators

Coordinated Motion Control of A Dual-Arm Space Robot with Joint-Limit Avoidance and Uncertain Inertial Parameters

Nonlinear Robust Adaptive Control for Spacecraft Attitude Tracking System

Robust controller design and experimental validation based on bounded uncertainty for collaborative industrial robots

Reactionless control of free‐floating space manipulators with parameter uncertainty and input disturbance

Robust tracking control of unknown models for space in-cabin robots with a pneumatic continuum arm

Robust Safety-Critical Control for Dynamic Robotics

Robust Control of Wheeled Mobile Manipulators Using Hybird Joints

Robust Motion Control of Quadrotors

Backstepping Based Robust Control for Space Tele-robot Systems with Finite-time Convergence.

Robust Task-Space Quadratic Programming for Kinematic-Controlled Robots

Dynamic Modeling and Control of Multibody Systems Using Dual Quaternions

Robust trajectory tracking control design for the robotic arm with uncertainty and experimental validation