A Dual-Arm Platform For Inner Space Station Operation

Qa Zhan,Qx Zhang,Gc Zhu,Yw Xie,W Zhang,Yh He

2001-01-01

Abstract:The paper introduces a dual-arm platform built by us for inner space station operation. The platform is composed of a dual-arm space system and a teleoperation system, which can provide capabilities for autonomous, teleoperation and teleautonomous control of the two robot arms/hands.

What problem does this paper attempt to address?

Design of a space dual-arm robot and its ground microgravity simulation platform

Dong Que,Li Xinyu,Meng Shaohua

DOI: https://doi.org/10.1109/eebda53927.2022.9744780

2022-02-25

Abstract:As The Chinese space station is put into use, the operation and maintenance of the space station inside and outside the cabin is a lot of work. In order to make astronauts have more time for scientific research experiments, a lot of routine maintenance and operation need to be replaced by space robots. Because of its human-like structure, the dual-arm robot is most suitable for the spatial structure environment. Based on this requirement, this paper proposes a space robot with 7 degrees of freedom in each arm, and designs its arm configuration and mechanical structure. In order to adapt to the characteristics of space microgravity environment, a dynamic calculation method of robot floating in space is presented. Finally, a passive suspension microgravity environment simulation platform with five lifting points was designed for the microgravity simulation test.
Design For A Dual-Arm Space Robot

Hui Li,Qiang Huang,Que Dong,Chen Li,Yu He,Zhihong Jiang,Yue Li,Peng Lv,Lin Xie,Xiaopeng Chen,Kejie Li

DOI: https://doi.org/10.1007/978-3-7091-0277-0_22

2010-01-01

Abstract:With the development of space technology, plenty of work for space assembly and maintenance should be carried out. However, these tasks are dangerous and high cost for astronauts. It is necessary to develop a space robot to complete these dangerous space operations. In this paper, we present a method of the design of dual-arm space robot, including the mechanism, integrative joint, vision system and vision-based climbing trajectory plan. Finally, the joint control performance experiment is provided.
Liberating Humanity from Heavy Labor: Dual-Arm Coordination and Teleoperation Control for an Assistive Robot

Lei Wang,Ruohan Wang,Honghao Lyu,Na Dong,Zhongwei Zhang,Yungang Hao,Haihui Yuan,Haiteng Wu,Geng Yang

DOI: https://doi.org/10.1109/isie54533.2024.10595726

2024-01-01

Abstract:With the increasing demand for smart assistive robotics, the interaction between robots and humans, as well as the interaction within robots themselves, have become increasingly important in human-robot collaboration. However, conventional autonomous robot control strategy struggles to flexibly adapt to dynamic and unstructured surroundings, such as household and medical environments. This paper proposes a dual-arm coordination control strategy based on admittance control, targeting work scenarios that require direct human involvement, to free human labor. The dual-arm robot is divided into master and slave arms, to play different roles during human-robot collaboration. The master arm is directly controlled by the operator through teleoperation and shares motion information. The slave arm, equipped with a force sensor at its end-effector, maintains the contact force with the object in the required directions through the admittance control algorithm and traces the trajectory of the master arm in other directions. Finally, an object-handling task for dual-arm is conducted to verify the feasibility of the proposed strategy. The results demonstrate the dual-arm coordination control strategy exhibits excellent maneuverability.
Dual-Arm space robot system design and coordination operations technology research

Liu Houde,Wang Xueqian,Liang Bin,Xu Wenfu

2013-01-01

Abstract:Robotic system is expected to play an increasingly important role in future space activities with the development of space technology. One broad area of application is in the servicing, construction and maintenance of satellites and large space structures in orbit. Compared with a single- Arm space robot, a dual- Arm or multi- Arm system has much more dexterity and flexibility, and can complete more complex tasks becoming an important development direction and trends of on-orbit servicing. The paper first analyzes the objectives of in-orbit mission by space robot and combined in the typical characteristics of the manipulation, then introducing the needs of space robot during the mission. On this basis of the research foundation, we designed the initial scheme of dual arm space robot system, including the robot configuration, docking mechanism and manipulator configuration. Then, based on the robot system designed, the problem of coordinated operation is researched, including dual arms operation together (including capturing and non- capturing task), one arm is used for target capturing, and the other for keeping the base initially fixed. Finally, based on the goals of the autonomy capture task, simulation is studied, the results show that the feasibility of the dual arm space robot system and lay the foundation for the subsequent space robot technology on-orbit servicing. Copyright ©2013 by the International Astronautical Federation.
Omnidirectional Continuous Movement Method of Dual-Arm Robot in a Space Station

Ziqiang Zhang,Zhi Wang,Zhenyong Zhou,Haozhe Li,Qiang Zhang,Yuanzi Zhou,Xiaohui Li,Weihui Liu

DOI: https://doi.org/10.3390/s23115025

IF: 3.9

2023-05-25

Sensors

Abstract:The burgeoning complexity of space missions has amplified the research focus on robots that are capable of assisting astronauts in accomplishing tasks within space stations. Nevertheless, these robots grapple with substantial mobility challenges in a weightless environment. This study proposed an omnidirectional continuous movement method for a dual-arm robot, inspired by the movement patterns of astronauts within space stations. On the basis of determining the configuration of the dual-arm robot, the kinematics and dynamics model of the robot during contact and flight phases were established. Thereafter, several constraints are determined, including obstacle constraints, prohibited contact area constraints, and performance constraints. An optimization algorithm based on the artificial bee colony algorithm was proposed to optimize the trunk motion law, contact point positions between the manipulators and the inner wall, as well as the driving torques. Through the real-time control of the two manipulators, the robot is capable of achieving omnidirectional continuous movement across various inner walls with complex structures while maintaining optimal comprehensive performance. Simulation results demonstrate the correctness of this method. The method proposed in this paper provides a theoretical basis for the application of mobile robots within space stations.

engineering, electrical & electronic,chemistry, analytical,instruments & instrumentation
Design of Space Robotic Arm-Hand System and Operation Research

Chunguang Fan,Yuanfei Zhang,Zongwu Xie,Yiwei Liu,Zhiqi Li,Chongyang Li,Hong Liu

DOI: https://doi.org/10.1109/icma.2018.8484684

2018-01-01

Abstract:This paper presents a newly developed robotic Arm-Hand system, which is composed of robotic arm, dexterous hand, tele-operation system, central controller, and visual system. Using this system, a strategy of maintenance on-orbit is proposed, the position of the electrical connector is obtained though the visual system. The target position is sent from the tele-operation system to the central controller, the central controller control the robotic arm and hand to complete the maintenance task. A self-adaptive gravity compensation controller is proposed by analyzing and comparing the difference of gravity between the ground and space. The result shows the effectiveness of the strategy which proposed by this paper.
Development of A Space Arm-Hand System for On-orbit Servicing

Pengfei Hou,Yiwei Liu,Zongwu Xie,Hong Liu

DOI: https://doi.org/10.1109/ICMA.2015.7237710

2015-01-01

Abstract:Facing current on-orbit servicing tasks, a space arm-hand system is designed and developed in this paper. Firstly, through contrast and analysis, the arm configuration of non-biased elbow and spherical wrist is identified, and the space hand system adopts the five-fingered dexterous robot hand. Secondly, the 6-DOF space arm system is accomplished including humanoid links and two different types of modular joints highly integrated in mechanical, electrical and control design. For the sake of attractive appearance and safety, the internal alignment design is adopted. Thirdly, the five-fingered space hand system is developed from modular fingers, multi-sensor integration system and hardware system. Finally, the system control strategy is formulated according to different on-orbit servicing stages and the corresponding ground verification test is arranged. The test result confirms on-orbit servicing capability of this space arm-hand system.
Design Of An Upper-Body Humanoid Robot Platform

Fenglei Ni,Chuangqiang Guo,Yiwei Liu,Minghe Jin,Hong Liu,Zijian Zhang

DOI: https://doi.org/10.1109/ICMA.2017.8016105

2017-01-01

Abstract:This paper presents a newly developed upper-body humanoid robot platform. The system has more than 52 degree of freedom (DOF), including two 7-DOF arms, two 15-DOF dexterous hands, a 3-DOF head, a 2-DOF waist and a 3-DOF mobile vehicle. To shorten development period and reduce cost, all the DOFs of the arms and the waist are designed with the modular joints. The two arms and two dexterous hands are identical. A control system with three hierarchical levels (including the teleoperation level, the central level and the joint control level) has been established to realize the control of the robot. Moreover, a high-speed serial communication bus (named as PPSECO) has been developed to complete communication between the controllers in the central level and in the joint level. At last, the box grasping experiment have completed successfully on the robotic platform, and the experimental results show that the robot has good operation performance.
Automatic Planning And Coordinated Control For Redundant Dual-Arm Space Robot System

Jun Zhou,Xilun Ding,Yu Yue Qing

DOI: https://doi.org/10.1108/01439911111097823

2011-01-01

Abstract:Purpose - The purpose of this paper is to present a novel automatic planning and coordinated control method of redundant dual-arm space robot for inner space-station operation based on multiple sensors information by stages.Design/methodology/approach - In order to improve the coordinated control capability of dual-arm robot system, a four-layer hierarchical control structure is designed based on the theory of centralization and decentralization. At the high-level planning of dual-arm system, a task decomposition strategy based on task knowledge and a task allocation strategy in terms of the robotic capability are proposed, respectively. Moreover, a control method by stages based on the information of multiple sensors is introduced to object recognition, task planning, path planning and trajectory planning. Finally, a 3D simulation and experiment of screwing nut and bolt are implemented on a dual-arm robot system, and the feasibility and applicability of this control strategy are verified.Findings - The automatic planning can be accomplished by means of sensors information by stages, and by this method, the autonomy and intelligence of dual-arm space robot system can be further improved.Practical implications - A new automatic: planning strategy integrated with multiple sensors information by stages is proposed, and can be implemented on a dual-arm robot system for inner space-station operations. This method specializes in heterogeneous dual-arm robot system.Originality/value - A task decomposition strategy based on task knowledge and a task allocation strategy in terms of the robotic capability are proposed, respectively. Moreover, a control method by stages based on the information of multiple sensors is introduced to object recognition, task planning, path planning and trajectory planning of dual-arm robot system.
Conceptual Design of Human-Robot System for On-orbit Service of Space Station

Liangliang HAN,Jian YANG,Meng CHEN,Ping TANG,Zhankui ZENG,Chongfeng ZHANG

DOI: https://doi.org/10.3969/j.issn.1674-5825.2015.04.002

2015-01-01

MANNED SPACEFLIGHT

Abstract:In the field of manned spaceflight, astronauts and space robot have formed a complementa-ry relationship.Astronauts, robot and environment are interrelated, inter-restricted and interacted with each other.Human-robot system aims at solving the problem of robot operation and human-robot interaction, according to the environment of the robot and astronauts.This paper analyzed the roles and relationship between astronauts and space robot, according to the requirements of novel human-ro-bot system for China space station in the management and maintenance stage, proposed a novel hu-man-robot system for on-orbit service of China space station, which was mainly based on a four-arm humanoid robot with similar configuration and operation characteristics with astronaut and made a con-ceptual design of robot configuration, control modes and methods for human robot interaction.The work can provide some useful references for repair and maintenance of China space station.
A Ground Teleoperation Experimental System of Space Robot Using Hybrid Approach

Panfeng Huang,Zhengxiong Liu,Gang Zhao,Wenfu Xu,Bin Liang

DOI: https://doi.org/10.1109/icitechnology.2007.4290387

2007-01-01

Abstract:Tasks to be performed in space by space robots will enhance the productivity and safety in the future space missions, such as assembly of the space station, repair of failed satellite in orbit and exploration of Lunar and Mars surface. However, in order to conduct the robots to complete these tasks, the space robots should be teleoperated from a ground control station. In this paper, we present the design, development and test of the ground experimental teleoperation system of space robotics using hybrid approach. To develop a engineering teleoperation system for controlling the space robot from the ground, we propose a novel approach to simulate the ground-space teleoperation using ground experimental system. In the ground experimental system, we combine the kinematical equivalence with dynamics calculation as a hybrid approach to simulate the on-orbital space robot and realize the semi-physics simulation of space robot, some typical experimental demonstrations verify that the proposed ground experimental teleoperation system has good performances and simulate the ground-space teleoperation environment basically.
On-Orbit Servicing To Geo Satellite Using Dual Arm Free-Flying Space Robot

Yue Qiu,Bibo Guo,Lijun Xue,Bin Liang,Cheng Li

DOI: https://doi.org/10.1109/ROBIO.2009.5420465

2009-01-01

Abstract:This paper presents the Dual Arm Free-flying Space Robotic System (DAFSR) which is developed for On-Orbit Servicing to GEO stationary satellite. DAFSR consists of free-flying platform, target detecting system and two space manipulators. In this paper, the mission schedule and the design of the system are described in detail, as well as the target detecting system and the ground tele-operational system. The planned missions include on-orbit target chasing and approaching, flying around and inspection, manipulator capturing and "soft" docking, robotic maintenance. This paper introduces the components and key techniques of DAFSR.
Design and Realization of the Experimental Platform of Space Robot Bilateral Teleoperation System

Li Lei,Wei Qing,Hou Zhilin,Zhao Lei

2011-01-01

Abstract:An experimental platform of bilateral teleoperation system is developed to meet the needs of the task requirement of the space robot monitoring in orbit, and it is composed of three modules for master force-reflecting parallel connection hand controller of Delta, Siemens Manutec r3 industrial robot and the communication simulator. Delta is the device of human-computer interaction and the perception of r3 industrial robot can be received, while Siemens Manutec r3 industrial robot can be controlled under the operator and the given tasks can be completed. The communication simulator emulates time delay and bandwidth of the teleoperation system. The experiment results are given to verify the effectiveness of the developed system.
A Shared Control Architecture for Dual-Arm Cooperating Teleoperation

Pan-feng HUANG,Zhen-yu LU,Xiao-peng DANG,Zheng-xiong LIU

DOI: https://doi.org/10.3873/j.issn.1000-1328.2018.01.014

2018-01-01

Abstract:For the delicate teleoperation task of the dual-arm space robot,a novel shared control method for the cooperative tasks is proposed,which is based on the traditional four-channel bilateral control architecture and the shared control method.Adding multiple dominant factors to the controllers in the master and slave side,a double closed-loop feedback loop,containing the information of force and position is built.By adjusting the shared control factors,the master operator can receive and share operation intentions with other operators.A space teleoperation experiment is conducted by CHAI 3D.Comparing with the two cases that single operator operates a dual-arm space robot and two operators handle one of the space robot arms respectively,the experimental results show that the proposed algorithm can improve the accuracy of operation and reduce the frequency of collision,thereby making the efficiency of the teleoperation task enhanced.
Development of dual-arm mobile robot platform based on ROS

Rui Xu,Lu Qian,Xingwei Zhao

DOI: https://doi.org/10.12688/cobot.17457.1

2022-01-12

Cobot

Abstract:Background: With the increasing demand of mobile robots in warehousing, logistics and service fields, simple planar motion is difficult to meet the task requirements of complex environment. The combination of mobile robot and cooperative robot is helpful to improve the dexterity of robot movement and expand the application of robots. Methods: Aiming at the application requirements of dual-arm robots and mobile robots in practical applications, this paper designed the hardware of a platform, built a simulation platform based on ROS (Robot Operating System), and designed the actual software control framework. Finally, the feasibility of the platform design was verified by the coupling motion experiment of the two robots. Results: We have established a simulation of the dual-arm mobile platform in ROS, designed the actual software control framework, and verified the feasibility of the platform design through experiments. Conclusions: The mobile platform can meet a variety of application requirements and lay the foundation for subsequent development.
Autonomous Assembly Method of 3-Arm Robot to Fix the Multipin and Hole Load Plate on a Space Station

Zeyuan Sun,Hong Yang,Que Dong,Yang Mo,Hui Li,Zhihong Jiang

DOI: https://doi.org/10.34133/2021/9815389

2021-12-16

Space: Science and Technology

Abstract:Using space stations for a large number of observation, exploration, and research is a necessary way to fully develop space technology. It is a necessary means of space experiment to install the extravehicular experimental load by using the load plate. However, the extravehicular environment is full of danger, which poses a threat to the health and even safety of astronauts. Using robots to replace astronauts to complete this task can effectively reduce the threat to astronauts. Aiming at the problem that the configurations of existing space robots have difficulty in balancing the contradiction between complexity and dexterity, our previous work proposes a 12-DOF 3-arm robot and preliminarily explores the feasibility of its large-scale ability. This paper focus on the 8-DOF redundant dexterous manipulator composed of 2 of the robot arms. In view of the difficulties in solving the inverse kinematics of the redundant manipulator, the challenges of complex environmental lighting, and difficulties of matching multiple groups of holes and pins in the load plate assembly task, the research on the autonomous assembly of the load plate is carried out. The main work is as follows: (a) A variable D-H parameter inverse kinematics solution method is proposed, which lays a foundation for humanoid dexterous operation planning of the robot. (b) An autonomous operation method based on visual guidance and variable parameter admittance control is proposed. Finally, the safety and robustness of the robot in the autonomous assembly of the load plate with multipins and holes are successfully verified by experiments.
Development of a dual-joint controller for space modular robotic system

Ping Ye,Hanxu Sun,Qingxuan Jia

DOI: https://doi.org/10.1109/iciea.2009.5138441

2010-01-01

Abstract:This paper studies a dual-joint controller for a space modular robotic system. First of all, a dual-joint module of the space modular robotic system is introduced; then, the features of the hardware and software system of the dual-joint controller are described, as well as design details and fault-tolerant mechanism; finally, the performance specifications of the dual-joint control system arc also presented. Many space proven design technologies and experiences are adopted, so the dual-joint controller is characterized by high reliability and practicability.
Implementation and Motion Planning of a Dual Arm Service Robot

Hong Bing Tan,Qi Xin Cao,Chun Tao Leng

DOI: https://doi.org/10.4028/www.scientific.net/amm.302.561

2013-01-01

Applied Mechanics and Materials

Abstract:This paper describes a dual arm service robotfor restaurant and homeservices. As for the mechanical architecture, we designed an Omni-directional chassis with four wheel-drivensubsystems which are independently suspended so that the robot can move stably and flexibly.Two 6-DOF component-based arms are designed and attached on the robot to fetching objects. A target-guide approach is utilized for path planning to complete object fetching and reception and introducing tasks. We have accomplished the implementation of the dual arm service robot and we have host a robot show with it on the 2010 shanghai EXPO. This robot is warmly welcomed by the visitors and highly praised.
Design and Simulation Analysis of a Dual Arm & Hands Mobile Robot Used in Space Truss

WU Wei-guo,XU Feng-lin

DOI: https://doi.org/10.3969/j.issn.1001-3997.2007.03.047

2007-01-01

Abstract:Space trusses are extensively used in bridges,stadium buildings and tower buildings,however,there is lots of inconvenience and danger to maintain and detect them,so a dual arm hands mobile robot with 6-D.O.F used in space truss is put forward and designed.In term of the actual structure and size of the designed robot,the virtual machine model of the robot is set up with the use of ProE and Adams software;the paper also shows the kinematics analysis to the robot structure,to get the solving of inverse kinematics.Finally,the movement simulation is completed with Adams software,and the torque curve and data of each joint by simulation prove that the driving capability of DC motors and joint torques are enough.
Robust control of a dual-arm space robot for in-orbit screw-driving operation

Xiaoyi Wang,Lingling Shi,Jayantha Katupitiya

DOI: https://doi.org/10.1016/j.actaastro.2022.07.048

IF: 2.954

2022-11-01

Acta Astronautica

Abstract:As large-scale spacecraft like Hubble Space Telescope need in-orbit assembly, there is an increasing need for the in-orbit assembly automatically carried out by space robots. This paper proposes a potential in-orbit screw-driving strategy carried out by a dual-arm space robot. Unlike single-arm space robots, a dual-arm space robot can avoid the translation and rotation of the target during the screw-driving process. For explanation, one arm can be set as the mission arm in the screw-driving process. The other arm can simultaneously provide the opposite contact forces and torques applied to the target. The hybrid position/force control strategy is developed for a dual-arm space robot to precisely deliver the desired contact forces by the end-effectors. Moreover, the base attitude of the space robot is controlled by reaction wheels to reduce the coupled movement between the base and the manipulators. According to a typical screw-driving procedure for automatic assembly, a desired fastening torque–angle curve is designed to ensure that the screw is firmly tightened. A robust Sliding Mode Controller (SMC) is designed to perform well against the uncertainties and disturbances applied to the space robot system. The simulation results show the feasibility of the potential dual-arm in-orbit screw-driving strategy.

engineering, aerospace

A Dual-Arm Platform For Inner Space Station Operation

Design of a space dual-arm robot and its ground microgravity simulation platform

Design For A Dual-Arm Space Robot

Liberating Humanity from Heavy Labor: Dual-Arm Coordination and Teleoperation Control for an Assistive Robot

Dual-Arm space robot system design and coordination operations technology research

Omnidirectional Continuous Movement Method of Dual-Arm Robot in a Space Station

Design of Space Robotic Arm-Hand System and Operation Research

Development of A Space Arm-Hand System for On-orbit Servicing

Design Of An Upper-Body Humanoid Robot Platform

Automatic Planning And Coordinated Control For Redundant Dual-Arm Space Robot System

Conceptual Design of Human-Robot System for On-orbit Service of Space Station

A Ground Teleoperation Experimental System of Space Robot Using Hybrid Approach

On-Orbit Servicing To Geo Satellite Using Dual Arm Free-Flying Space Robot

Design and Realization of the Experimental Platform of Space Robot Bilateral Teleoperation System

A Shared Control Architecture for Dual-Arm Cooperating Teleoperation

Development of dual-arm mobile robot platform based on ROS

Autonomous Assembly Method of 3-Arm Robot to Fix the Multipin and Hole Load Plate on a Space Station

Development of a dual-joint controller for space modular robotic system

Implementation and Motion Planning of a Dual Arm Service Robot

Design and Simulation Analysis of a Dual Arm & Hands Mobile Robot Used in Space Truss

Robust control of a dual-arm space robot for in-orbit screw-driving operation