Abstract:Surface discharge induced by metal particles is a common insulation failure in many high-voltage equipment. In order to further understand the mechanisms of this surface discharge, a 2D simulation model of a plate-surface-plate structure with a pin is established and verified by experiments in this paper to simulate the actual discharge configurations, and the evolution characteristics of the positive and negative surface discharges are compared. The evolutions of both positive and negative discharges could be divided into two phases: the bridging phase and the expansion phase. As the electric field in the gap between the streamer and the dielectric surface is strengthened by the effect of the space charge, the ionization sources and the secondary electrons excited on the dielectric surface, the dielectric surface presents attraction to the streamer, and subsequently the two streamer routes first touch the dielectric surface and then arrive at the grounding electrode. However, the channel branching is the most distinctive characteristic of the positive and negative discharges. In the positive discharge, the channel first branches, then merges, and finally expands, and the gaps of pin to dielectric surface and pin to grounding electrode are broken down by two slender positive branches, respectively. The negative discharge presents a stout channel without branching, which develops and expands simultaneously. This is ascribed to the thinner space charge layer, the weaker shielding effect of the internal electric field and the more active movement of the internal charges in the positive discharge. Another important factor for the discharge branching is the appropriate matching of the sheath thickness and the curvature radius of the channel's head.

A Simulation On Cell Discharge In Ac Pdp With A Planar Configuration By Pic Mcc Method

The Multi-Pulse Simulation On Driving Characteristics Of Ac Pdp

Numerical Simulation of the Discharge Efficiency in Five-Electrode Ac Pdp

3D PIC-MCC Simulation of Corona Discharge in Needle-Plate Electrode with External Circuit

Electrical Modeling of Dielectric Barrier Discharge Considering Surface Charge on the Plasma Modified Material

Simulation of Partial Discharge Sequences Using Fluid Equations

Numerical Analysis of the Discharge Characteristics of the Surface Charge AC-PDP

Research on the insulator surface discharge characteristics in SF6/N2 gas mixture using PIC method

Particle-in-cell and Monte Carlo Collision Simulations of the Cathode Sheath in an Atmospheric Direct-Current Arc Discharge

Post-arc sheath simulation in vacuum circuit breaker with one-dimensional particle in cell-Monte Carlo collisions method

A Parallel PIC-MCC Simulation of Microsecond Discharge Modeling in EDM

Simulation of initial discharge courses of a pseudo spark switch

Numerical Simulation of the Breakdown on Hpm Dielectric Surface

Effect of surface photoemission on discharge in PDP

Simulation comparison of the positive and negative surface discharges induced by metal particles in a plate-surface-plate structure under DC excitation in atmospheric air

Study of Characteristics of Coplanar Dielectric Barrier Discharge

FEM Simulation of Charge Accumulation Behaviours on Polyimide Surface in 10 kV Negative High-Voltage Corona Polarization Process

Electrical Characteristics of the GEC Reference Cell with Impedance Matching: A Two-Dimensional PIC/MCC Modeling Study

Computer Simulation Of Partial Discharge In Void

Two-Dimensional Simulation Research Of Secondary Electron Emission Avalanche Discharge On Vacuum Insulator Surface

Study of Post-Arc Residual Plasma Dissipation Process of Vacuum Circuit Breakers Based on a 2D Particle-in-cell Model