Abstract:In this paper, a feedback control mechanism and its optimization for rotating disk vibration/flutter via changes of air-coupled pressure generated using piezoelectric patch actuators are studied. A thin disk rotates in an enclosure, which is equipped with a feedback control loop consisting of a micro-sensor, a signal processor, a power amplifier, and several piezoelectric (PZT) actuator patches distributed on the cover of the enclosure. The actuator patches are mounted on the inner or the outer surfaces of the enclosure to produce necessary control force required through the airflow around the disk. The control mechanism for rotating disk flutter using enclosure surfaces bonded with sensors and piezoelectric actuators is thoroughly studied through analytical simulations. The sensor output is used to determine the amount of input to the actuator for controlling the response of the disk in a closed loop configuration. The dynamic stability of the disk-enclosure system, together with the feedback control loop, is analyzed as a complex eigenvalue problem, which is solved using Galerkin’s discretization procedure. The results show that the disk flutter can be reduced effectively with proper configurations of the control gain and the phase shift through the actuations of PZT patches. The effectiveness of different feedback control methods in altering system characteristics and system response has been investigated. The control capability, in terms of control gain, phase shift, and especially the physical configuration of actuator patches, are also evaluated by calculating the complex eigenvalues and the maximum displacement produced by the actuators. To achieve a optimal control performance, sizes, positions and shapes of PZT patches used need to be optimized and such optimization has been achieved through numerical simulations.

Study on Active Control of Rotating Disk Vibration

Active Vibration Control Analysis of Spatial Structures by State-Derivative Feedback Algorithm

Active Vibration Control for A Rotor System Subjected to Random Excitation

Vibration Control for Active Magnetic Bearing High-Speed Flywheel Rotor System with Modal Separation and Velocity Estimation Strategy

Experiments on the Active Control of Circular Disk Vibration

Active Vibration Control of Rotor System by A Magneto-Rheological Fluid Damper

Dynamics Analysis Control on Dual Delay Bearing-Rotor System

Optimization of Sensing and Feedback Control for Vibration/Flutter of Rotating Disk by PZT Actuators Via Air Coupled Pressure

Application of stochastic optimal strategies in vibration control for rotor system

Stability of Active Magnetic Bearing Flexible Rotor System under Base Swing Condition

Vibration of Flexible Rotor Systems with Two-Degree-Of-Freedom Pid Controller of Active Magnetic Bearings

Multiobjective Vibration Control for the Noncollocated Active Magnetic Bearings Flexible Rotor Systems

Stochastic Optimal Strategy in Vibration Control for Imperfect Measurement Rotor System

Experimental study on controlling actively wheel unbalance vibration

Active Vibration Control of a Non-collocated AMBs Flexible Rotor System to Pass the First Bending Critical Speed

Active control with multi-frequency transmission force of multi-span rotor system

Dynamic modeling and stability analysis of a rotor-bearing system with bolted-disk joint

Stability of Rotor System with Nonlinear Vibration

A Unified Modeling Approach for Rotating Flexible Shaft-Disk Systems with General Boundary and Coupling Conditions

Simulation study of active vibration control of planetary gear: Theoretical and numerical analysis using pole placement

Stability and Response Analysis of Symmetrical Single-Disk Flexible Rotor-Bearing System