Abstract:Energy crisis and environmental pollution make it attractive to find an environmentally friendly and renewable energy source to substitute fossil fuels. Charcoal briquettes produced from sawdust densified fuels by carbonization, which are often applied in barbecue field, can not only meet the demands of energy but also protect forest resources and maintain the ecological balance. Properties of charcoal powder were reported to be influenced by carbonization conditions such as temperature, heating rate and residence time, while the studies on those of charcoal briquettes were rare, especially the mechanical behavior and combustion performance. Cedarwood sawdust was used to produce high density, virgate briquette by using spiral pipe hot extrusion equipment. The parameters of briquette: screenshot size was 60 mm ×60 mm, and the length was 60 mm, the hole diameter was 22 mm, the average density was 1.24 g/m3, average mass was 240 g. In order to prepare charcoal briquettes with good transportation and combustion performances, Chinese fir sawdust briquettes were carbonized at the temperature of 400, 450, 500, 550 and 600℃, heating rate of 2, 6 and 10℃/min, and residence time of 60, 120 and 180 min, respectively. The effects of temperature, heating rate and residence time on the compression resistance, shatter resistance, calorific value, and ash content of charcoal briquettes were investigated. Results showed that with the carbonization temperature increasing, the yield of charcoal briquettes decreased from 37.33% at 400℃ to 29.62% at 600℃, whereas the calorific value slightly increased from 26.40 MJ/kg at 400℃ to 31.04 MJ/kg at 550℃. Charcoal briquettes appeared to have a high calorific value at the temperature of 550℃ as well as a relatively good property in compression resistance (143.7 kPa) and shatter resistance. The compression resistance and shatter resistance were significantly improved with the decrease of heating rate. Compression resistance reached the maximum value of 439.8 kPa and crack occurred rarely on the surface of charcoal briquettes at heating rate of 2℃/min as well as the best shatter resistance. A residence time of 120 min could be the better choice, for it exhibited the least ash content of 6.27%, the highest fixed carbon content of 69.08%, the highest calorific value of 29.63 MJ/kg and the highest compression resistance of 192.1 kPa, respectively. These results can supply some technical support for the production of good quality charcoal briquettes.

Study on the operation conditions for making refuse derived fuel (RDF)

Carbonization Temperature and Time Improving Quality of Charcoal Briquettes

Pyrolysis of Plastics-Free Refuse Derived Fuel Derived from Municipal Solid Waste and Combustion of the Char Products in Lab and Pilot Scales: A Comparative Study

PREPARATION OF RDF USING SCREENING RESIDUES OF MSW AS RAW MATERIALS AND STUDY ON ITS COMBUSTION CHARACTERISTICS

Study on Thermogravimetric Experiment of Pyrolysis of Refuse Derived Fuel

Combustion Characteristic of Refuse Derived Fuel under Oxygen-Enriched Atmosphere

Pyrolysis Experiment of Refuse Derived Fuel and Study on Characteristics of Semi-Coke

Forming Characteristics of Refuse Derived Fuel from High Heating Value Waste and Feasibility.

Green refuse derived fuel preparation and combustion performance from the solid residues to build the zero-waste city

Study on Gasification Kinetics of Refuse-Derived Fuel Semi-Cokes

Pollutants Emission Characteristics of Refuse Derived Fuel in Oxygen-Enriched Combustion

Segmented catalytic gasification of refuse derived fuels

Ecological and chemical safety assessment of RDF as alternative fuel for boiler stations

TEST STUDY ON PROPERTIES OF CARBOCOAL FROM PYROLYSIS OF REFUSE DERIVED FUEL

Navigating the depths of refuse-derived fuel in Canada: From heterogeneity to insightful analysis

Experimental Investigation on Co-firing of Coal and Refuse-derived Fuel in a Pilot-scale Circulating Fluidized Bed Combustor

Experiment research on utilization of particle biomass fuel in sintering process

Modeling and optimization of compaction pressure, binder percentage and retention time in the production process of carbonized sawdust-based biofuel briquettes using response surface methodology (RSM)

Chemical Characterization of Refuse Derived Fuel (RDF) using Py-GC/MS

Study of the Combustion Process for Two Refuse-Derived Fuel (RDF) Streams Using Statistical Methods and Heat Recovery Simulation

Producing Refuse Derived Fuel with Refining Industry Oily Sludge and Mushroom Substrates