Abstract:Vehicles commonly suffer from the narrow-band noises and vibrations, usually a superposition of multiple sinusoidal signals, due to the excitations of engines, electrical motors, gear boxes, and other rotating mechanical parts. These excitations are transmitted to a reference point of some structure with certain transmission paths. The vibration signal measured at the reference point can be used for power system monitoring, fault diagnosis, modal analysis, noise analysis, etc. For convenience, researchers in a laboratory usually use shakers to generate expected narrow-band vibration signals acting on the vehicle structure reference points to simulate the vibration signals. However, there is a prominent difficulty in ensuring the amplitude and phase accuracy of each sub-frequency component simultaneously. In order to improve the accuracy of generating the expected vibration signal, this paper presents a multi-source vibration simulation control technology based on the tracking filter method. The main idea is to use the tracking filter to estimate the amplitude and phase of the target sub-frequency component accurately. Further, on the target sub-frequency, the drive signal of shakers is then corrected based on the amplitude and phase errors to achieve a more accurate target vibration signal. The amplitude and phase of each sub-frequency component in the excitation signal can be controlled independently. Compared with other Fast Fourier Transform (FFT)-based frequency domain analysis algorithms and numerical methods by solving the equations, the tracking filter method has a higher frequency resolution and higher accuracy. It can be easily realized in real time applications due to its simplicity. Finally, verification experiments are completed. The experimental results show that the multi-source vibration simulation control technology presented in this paper can achieve high-precision amplitude and phase on each sub-frequency component of the target vibration signals, which contain up to eight sub-frequency components.

Morphological filter based noise removal from vibration signals of fighter plane

Application of Morphology Filtering Method in Vibration Signal De-Noising

De-noising for Vibration Signals of a Rotating Machinery Based on Generalized Mathematical Morphological Filter

Application of Morphological Filter in Pulse Noise Removing of Vibration Signal

Research On Control Technologies For A High-Precision Multi-Source Vibration Simulation System

Purification of Rotor Center's Orbit Based on Generalized Morphological Filter

Morphological haar wavelet-based purification of rotor center's orbit

Removal of power line interference of space bearing vibration signal based on the morphological filter and blind source separation

Design and Analysis of Morphological Filter for Vibration Signals of a Rotating Machinery

Morphological Filters in Feature Extraction for Rolling Bearing Defect Signals

Blind separation of rotor vibration signals in high-noise environments

Fast multiline spectral reshaping algorithm for active vibration control

A New Method of Denoising of Vibration Signal and Its Application

Mathematical Morphological Filtering for Linear Noise Attenuation of Seismic Data

Noise reduction and feature enhancement of hob vibration signal based on parameter adaptive VMD and autocorrelation analysis

Morphology Filters for Analyzing Roller Bearing Fault Using Acoustic Emission Signal Processing

A Moving Hum Filter to Suppress Rotor Noise in High-Resolution Airborne Magnetic Data

A pseudo‐adaptive hum filter to suppress rotor noise in high‐resolution airborne magnetic data

Denoising method of machine tool vibration signal based on variational mode decomposition and Whale-Tabu optimization algorithm

Reduction of the High-Speed Magnetically Suspended Centrifugal Compressor Harmonic Vibration Using Cascaded Phase-Shifted Notch Filters

Aerodynamic noise separation of helicopter main and tail rotors using a cascade filter with Vold-Kalman filter and cyclic Wiener filter