Abstract:An axial flux permanent magnet energy harvester (AFPMEH) is proposed and analyzed for a vehicle magneto-rheological (MR) damper. The relationship between the output voltage and the input excitations are analytically developed. Under different constant rotation speeds and sinusoidal excitations, the harvesting energy is numerically computed for different loads of pure resistance and coil in the MR damper. To check the performance of the proposed AFPMEH for the MR damper, the AFPMEH and MR damper are fabricated individually. Experiments are performed to measure the harvesting energy of the AFPMEH and the damping characteristics of the MR damper under different excited conditions. The excited conditions include three constant rotation speeds and sinusoidal inputs. Load inputs of the pure resistance and the coil of the MR damper are considered. The results show that the time history of the generated voltage of the AFPMEH in experiment is agreed well with that of the AFPMEH in simulation. Under constant rotation speeds, the root mean square (rms) of loaded voltage will increase with the increment of load, whereas the rms of power will be affected by the amplitude of load. The MR damper powered by the AFPMEH can almost obtain the similar damping characteristics of that external power supply. Under sinusoidal inputs, the rms of loaded voltage will increase with the increment of external loads, whereas the rms of power will be almost kept as a constant. The damping range of the MR damper can also be enlarged over 30% comparing to off-state damping force. A quarter car model with an MR damper powered by the AFPMEH is developed to investigate the control performance. The on–off skyhook control is adopted to tune the input current of the MR damper. The vibration performance of the MR suspension is investigated under different roads and vehicle speeds. The numerical results show that the MR suspension with the AFPMEH under on–off skyhook control can achieve better ride comfort than the off case or the case without control. This indicates that the feasibility of AFPMEH in application of the vehicle MR suspension system.

Electrorheological Moment Amplifier

Experimental Investigations on the Nonlinear Dynamics of Magnetorheological Dampers

A Study on Cylindrical Type of MR Fluid Actuator

Optimal Design of Magnetic System for the Magnetorheological Intelligent Damper

RF Power Amplifier Design for Wireless Power Transfer Using Method of Moment

Performance enhancement of electromagnetic vibration energy harvesters via bi-stable structure based on MEMS 3D coils

Analytical Modeling and Optimal Design of a MR Damper with Power Generation.

Design, modeling and testing of a new compressive amplifier structure for piezoelectric harvester

Design and Damping Performance Analysis of a Multistage Meandering Hybrid Valved Magnetorheological Damper

A new magnetorheological elastomer torsional vibration absorber: structural design and performance test

Design and characterization of axial flux permanent magnet energy harvester for vehicle magnetorheological damper

Improving the performance of magnetorheological elastomer-based adaptive isolator through integrated compression-torsion structure

Experimental Study on Pulse Responses of an MR Elastomer Damper-Rotor System

Design and dynamic analysis of integrated architecture for vibration energy harvesting including piezoelectric frame and mechanical amplifier

Development and Experimental Study of a Mixed-Mode Vibration Isolator Using Magnetorheological Elastomer

A study on micro strain electrorheological damper model

Performance Improvement of an MR-Damper-Based Vibration-Reduction System with Energy Harvesting at Sprung Mass Changes

Stimuli Dependent Impedance of Conductive Magnetorheological Elastomers

Experimental Study and Mathematical Modeling of Magnetorheological Elastomers Considering Molecular Chain Network and Temperature Influence

A micro-electromagnetic vibration energy harvester with higher power density and wider bandwidth utilizing 3D MEMS coils

Design and characterization of an amplitude-limiting rotational piezoelectric energy harvester excited by a radially dragged magnetic force