Abstract:To further improve the Fe45Mn35Co10Cr10 high–entropy alloy coating prepared by plasma spraying, laser remelting was used to improve its structures and tribological properties. The effects of laser remelting on the microstructure, element composition, phase and hardness of obtained coating were investigated using a super depth of field microscope, energy dispersive spectrometer, X–ray diffraction and hardness tester, respectively. The tribological properties were measured via a ball–on–disk tester at room temperature and 500 °C, and the wear mechanisms were also discussed. The results show that the laser–remelted HEA coating is still composed of face–centered cubic structure, and its hardness is increased by ~301.4% compared with the plasma–sprayed coating, which is attributed to the grain refinement and solid solution strengthening effects. The average coefficient of friction and wear rate of laser–remelted HEA coating is superior to the plasma–sprayed HEA coating, showing that the laser remelting process plays the roles of friction reduction and wear resistance. The wear mechanism of plasma–sprayed HEA coating at room temperature is fatigue wear, abrasive wear and oxidative wear; while that of laser–remelted coating is abrasive wear and oxidative wear. Moreover, the wear mechanism of plasma–sprayed coating at 500 °C is adhesive wear, abrasive wear and oxidative wear, while that of laser–remelted HEA coating is adhesive wear and oxidative wear, which is attributed to the reduction of plastic deformation by the softening effect at high temperature.

Laser Remelting of Plasma Sprayed Coatings

Laser Remelting of Plasma Sprayed Nicraly and Nicraly-Al2o3 Coatings

Effect of laser remelting on microstructure, salt spray corrosion and electrochemical performance of plasma sprayed CoCrFeNiMo HEA coating

Effect of laser remelting on corrosion behavior of plasma-sprayed Ni-coated WC coatings

Effects of Laser Remelting on Microstructural Characteristics and Hot Corrosion Behavior of MСrAlY Coating Prepared by Plasma Spraying

Laser Surface Remelting of Plasma-Sprayed Nanostructured Al2O3–13 Wt%tio2 Coatings on Magnesium Alloy

Microstructure and Corrosion Properties of Plasma-Sprayed NiCr–Cr3C2 Coatings Comparison with Different Post Treatment

Laser Remelting of Plasma Sprayed Nanostructured Al2O3–TiO2 Coatings at Different Laser Power

Effect of laser remelting on the microstructure and properties of the aluminum high silicon alloy coating

Effect of laser remelting on microstructure and properties of two Ni-base coatings by supersonic particles deposition

Laser Surface Remelting of Plasma Sprayed Nanostructured Al2O3–13wt%TiO2 Coatings on Titanium Alloy

Improvement of Ni–Cr–Mo Coating Performance by Laser Cladding Combined Re-Melting

Laser Remelting of Plasma-Sprayed Nanostructured Al2O3–20 Wt.% ZrO2 Coatings Onto 316L Stainless Steel

Laser remelting of plasma-sprayed yttria partially stabilized zirconia coatings

Improvements in Microstructure and Wear Resistance of Plasma-Sprayed Fe-Based Amorphous Coating by Laser-Remelting

Effects of Laser Re-Melting and Annealing on Microstructure, Mechanical Property and Corrosion Resistance of Fe-Based Amorphous/Crystalline Composite Coating

Corrosion characteristics of plasma-sprayed Ni-coated WC coatings comparison with different post-treatment

Effects of Laser Surface Remelting on the Molten Salt Corrosion Resistance of Yttria-Stabilized Zirconia Coatings

Strength and toughness of laser-remelted Al_2O_3-TiO_2 coatings

Effects of laser remelting on microstructure and tribological properties of plasma–sprayed Fe45Mn35Co10Cr10 high–entropy alloy coating

Influence of Laser Remelting on the Microstructure and Phases Constitution of Plasma Sprayed Hydroxyapatite Coatings