Abstract:Abstract The hydraulic characteristics of the 30% TRPO (trialkylphosphine oxide)/kerosene―1.0 M HNO3 and 0.025 M iPr-C [4]C-6 (25,27-bis(isopropoxy) calix [4]-26,28-crown-6)/n-octanol―1.3 M HNO3 systems were systematically investigated in a φ20 ACE (annular centrifugal extractor) to find the cause of the hydraulic performance problem of the CECE (calixcrown ether extraction) process operated in ACEs. The results show that the operating and structure parameters have different influences on the F (A/O) (phase ratio (A/O)) and V (liquid hold-up volume). Moreover, the Vr (V of the rotor) of the 30%TRPO/kerosene―HNO3 and iPr-C [4]C-6/n-octanol―HNO3 systems are almost same, while the Vm (V of the mixing zone) and Vt (total V of the ACE) for the former are slightly higher than those for the latter under the same experimental conditions. Meanwhile, both the Fm (A/O) (F (A/O) of the mixing zone) and Fs(A/O) (F (A/O) of the separating zone) for the 30%TRPO/kerosene―HNO3 system are also higher than those for the iPr-C [4]C-6/n-octanol―HNO3 system under the same experimental conditions. Moreover, the Fs(A/O) of the iPr-C [4]C-6/n-octanol―HNO3 system is less than 1.5 under most of the present experimental conditions, which shows organic phase entrainment may easily occur in the outlet aqueous phase. This may be the cause of the hydraulic performance problem of the CECE process operated in ACEs.

Hydrodynamic Characteristics of 30% TRPO-kerosene/nitric Acid Solution in Pulsed Extraction Column

Hydrodynamics of Φ50 Pulsed Extraction Column with Discs and Doughnuts

Hydrodynamics Characteristics of 30%Tbp-Kerosene/nitric Acid Solution in Discs and Doughnuts Pulsed Extraction Column

Study on Hydrodynamics Characteristics in Discs and Doughnuts Pulsed Extraction Column

Extraction of Uranium Nitrate with 30% (v/v) Tributyl Phosphate in Kerosene in an Pilot Annular Pulsed Disc-and-Doughnut Column—Part I: Hydraulic Performance

Comparison of the hydraulic characteristics of the 30%TRPO/kerosene―HNO3 and iPr-C[4]C-6/n-octanol―HNO3 systems in an annular centrifugal extractor

Application of Air-Lifting Pump in Standard Spray-Sieve-Plates Pulsed Extraction Column

On-Line Determination of Pulsed Parameters for Pulsed Extraction Column with Discs and Doughnuts by Air Purge Method

Axial Mixing and Mass Transfer Characteristics of Pulsed Extraction Column with Discs and Doughnuts

Extraction of Uranium Nitrate with 30% (v/v) Tributyl Phosphate in Kerosene in a Pilot Annular Pulsed Disc-and-Doughnut Column-Part II: Axial Mixing and Mass Transfer Performance

Determination of Holdup by Air Purge in Φ50 Mm Discs and Doughnuts Pulsed Extraction Column

Hydrodynamic Characteristics of 30%Tbp/kerosene-Hno 3 Solution System in an Annular Centrifugal Contactor

Hydrodynamics and Mass Transfer in a Pulsed Packed Column

Flooding behavior of the standard liquid–liquid extraction systems in a pilot plant L-type pulse packed extraction column: Experimental study

Direct Determination of Flooding in Discs and Doughnuts Pulsed Extraction Column by Air-Purge Method

Hydrodynamics And Mass-Transfer Of A Sieve Plate Column For Liquid-Liquid-Extraction

Impurities removal from acidic solution of nickel cobalt complex hydroxide using pulsed disc and doughnut column

Flooding Behavior of the Standard Liquid–Liquid Extraction Systems in a Pilot Plant L-Type Pulse Packed Extraction Column: Experiment and Modeling

Microdroplet-based continuous countercurrent extraction with high phase ratio

Hydrodynamics of a Pulsed Sieve Plate Extraction Column

An Industrial-Scale Annular Centrifugal Extractor for the TRPO Process