Abstract:A methodology for evaluating the response of embedded fibre Bragg grating (FBG) sensors in composite structures based on the strain in a host material is introduced. In applications of embedded FBG sensors as strain sensing devices, it is generally assumed that the strain experienced in a fibre core is the same as the one measured in the host material. The FBG sensor is usually calibrated by a strain gauge through a tensile test, centred on obtaining the relationship between the surface strain in the host material and the corresponding Bragg wavelength shift obtained from the FBG sensor. However, such a calibration result can only be valid for uniform strain measurement. When the strain distribution along a grating is non-uniform, average strain measured by the strain gauge cannot truly reflect the in-fibre strain of the FBG sensor. Indeed, the peak in the reflection spectrum becomes broad, may even split into multiple peaks, in sharp contrast with a single sharp peak found in the case of the uniform strain measurement. In this paper, a strain transfer mechanism of optical fibre embedded composite structure is employed to estimate the non-uniform strain distribution in the fibre core. This in-fibre strain distribution is then utilized to simulate the response of the FBG sensor based on a transfer-matrix formulation. Validation of the proposed method is preceded by comparing the reflection spectra obtained from the simulations with those obtained from experiments.

High Resolution Static Strain Measurement Using An In-Fibre-Bragg-Grating-Based Fabry-Perot Sensor

A High-Resolution Demodulation Algorithm for FBG-FP Static-Strain Sensors Based on the Hilbert Transform and Cross Third-Order Cumulant

Dynamic strain measurement using two wavelength-matched fiber Bragg grating sensors interrogated by a cascaded long-period fiber grating

High-Resolution and Large-Dynamic Range Fiber-Optic Sensors Based on Dual-Mode Direct Spectrum Interrogation Method

Ultrahigh-Resolution Fiber-Optic Sensing Using a High-Finesse, Meter-Long Fiber Fabry-Perot Resonator

High sensitivity fiber optic strain sensor based on CFBG-FPI and vernier effect

Static Pure Strain Sensing Using Dual-Comb Spectroscopy with FBG Sensors.

Research On Measurement Of Fiber Bragg Grating Considering The Cross-Sensitivity Of Temperature And Strain

High Resolution and Wide Scale Fiber Bragg Grating Sensor Interrogation System

Temperature-controlled Fiber Bragg Grating Dynamic Strain Detection System

High Precision Measurement Of The Wavelength Shift Of In-Fiber Bragg Grating With Strain-Gauge

Simultaneous Independent Temperature and Strain Measurement Using One Fiber Bragg Grating Based on the Etching Technique

A Method of Strain Measurement Based on Fiber Bragg Grating Sensors

High-speed Quasi-Distributed Strain Sensing Based on Time Division Multiplexing of Fibre Bragg Gratings

High-Resolution Sensing System Based on Fiber Bragg Grating Fabry–Perot Interferometer and Frequency-Domain Demodulation

Compact Fiber Sensor With High Spatial Resolution for Simultaneous Strain and Temperature Measurement

Strain sensor system based on a high finesse fiber Bragg grating Fabry-Perot cavity

Embedded fibre Bragg grating sensors for non-uniform strain sensing in composite structures

A New FBG Based Dynamic-Strain Interrogation System

An optimized strain demodulation method based on dynamic double matched fiber Bragg grating filtering

Highly Integrated All-Fiber FP/FBG Sensor for Accurate Measurement of Strain under High Temperature