Perfect Self-Repairing Control for a Kind of Fault System

Y Wang,DM Sun,SS Hu

DOI: https://doi.org/10.1109/wcica.2000.860073

2000-01-01

Abstract:The concepts of perfection in a fault system are presented. The design of perfect self-repairing control laws for failures in actuators and in both actuators and sensors are given. The good self-repairing results show the methods are effective.

What problem does this paper attempt to address?

Satisfactory Fault-Tolerant Controller Design for Uncertain Systems Subject to Actuator Faults

Zhang Dengfeng,Su Hongye,Wang Zhiquan

DOI: https://doi.org/10.3321/j.issn:0254-3087.2008.05.005

2008-01-01

Abstract:Based on satisfactory control strategy, a new method for robust passive fault tolerant controller is proposed for a class of uncertain discrete-time systems subject to actuator faults. The state-feedback gain matrix is calculated by linear matrix inequality (LMI) technique. The designed controller guarantees that the closed-loop system meets the pre-specified consistent constraints on circular pole index and steady-state variance index simultaneously for normal case and possible actuator fault case. The consistency of the performance indices is discussed. Furthermore, with the mentioned indices constraints, a solution is obtained by convex optimal technique for the robust satisfactory fault-tolerant controller with optimal control-cost.
Data-Driven Optimal Fault-Tolerant Control for Unknown Linear Systems

Qinmin Yang,Zhengwei Ruan

DOI: https://doi.org/10.1109/ddcls.2019.8909035

2019-01-01

Abstract:In this paper, optimal fault-tolerant control is investigated for a class of unknown linear systems with multiple actuators subject to actuator faults. To tackle the problem of actuator faults and maintain the nearly optimal systems performance, a novel optimal fault-tolerant control strategy is proposed on account of the real system information, without the necessity of complete knowledge of system matrices. It consists of a switching function method, a novel adaptive control law and an optimal control policy. By optimizing a cost function, an optimal adaptive controller is found to stabilize the system with the approximate dynamic programming technique. The switching function related to the optimal control policy is implemented to locate and reduce the impact of the faulty actuators automatically. Furthermore, all the signals of the closed-loop system are ensured to be uniformly bounded and the stability analysis is rigidly given. Finally, some simulation studies are provided to verify the merits of the proposed method.
Some basic problems about self-repairing flight control

Yong Wang,ShouSong Hu,Yun Xiong

DOI: https://doi.org/10.1109/wcica.2000.863081

2000-01-01

Abstract:For certain structral failures and damages that cannot employ redundant technique, to ensure the flight safety to the extreme possibility, the most prospective method is self-repairing technique. Based on the characters of self-repair plane, the paper explicitly states some basic assumptions of the self-repair plane, and comes up With some special new conceptions concerning the self-repairing plane: control input, operating input, command input, repair input and operating & control factor, etc., and their relationship. Thus it provides a simple and reliable mathematical model structure for the research on the self-repair control of plane.
Fault-tolerant Control for Fuzzy Switched Singular Systems with Persistent Dwell-Time Subject to Actuator Fault

Hao Shen,Mengping Xing,Zheng-Guang Wu,Ju H. Park

DOI: https://doi.org/10.1016/j.fss.2019.08.011

IF: 4.462

2020-01-01

Fuzzy Sets and Systems

Abstract:This paper investigates the problem of fault-tolerant state feedback fuzzy control for discrete-time nonlinear switched singular systems subject to the actuator fault. The typical Takagi-Sugeno model is utilized to process the nonlinearity of the systems. For the purpose of describing the intermittent occurrence of fast and slow switching among subsystems, a switching signal complying with persistent dwell-time switching regularity is introduced for the first time into the analysis of nonlinear switched singular systems. The primary objective is focused on constructing a fault-tolerant controller which can ensure that the closed-loop system is exponentially admissible with a prescribed l2 -gain performance in the presence of actuator fault. By using mode-dependent Lyapunov function and employing an improved matrix decoupling method, sufficient conditions with less conservatism for the existence of the desired controller are established and the explicit form of the controller gains is presented. For explaining the effectiveness of the proposed method, two illustrative examples are given finally.
Fault-tolerant Control for Time-Delay Systems Via Output Dynamical Feedback

Wei Qian,Juan Liu,Youxian Sun

DOI: https://doi.org/10.1109/wcica.2008.4594206

2008-01-01

Abstract:The issue of fault-tolerant control for a class of time-delay systems with sensor failures was investigated. Attention was focused on the design of output dynamical feedback controller which guaranteed the asymptotical stability of the closed-loop systems even when the sensor failed. Based on the [0, sigma] actuator model of failure and delay-dependent stability criterion for nominal time-delay systems, by introducing nonlinear transformation, the nonlinear inequality was translated into linear inequality, the sufficient conditions for the existence of feedback controller are obtained. Moreover, the expression for the desired controller is given by using the LMI and the cone complementary linearization iterative algorithm. Numerical examples are presented to illustrate the effectiveness of the method.
Finite‐time Reliable ℒ 2 − ℒ ∞ /ℋ ∞ Control for Takagi–Sugeno Fuzzy Systems with Actuator Faults

Hao Shen,Ju H. Park,Zheng-Guang Wu

DOI: https://doi.org/10.1049/iet-cta.2013.0486

2014-01-01

Abstract:This study deals with the problem of finite-time reliable L2 - L-infinity/H-infinity control for non-linear systems with actuator faults through Takagi-Sugeno fuzzy model approach. The actuator failure model under consideration is assumed to be governed by a homogenous Markov chain. The focus is on the design of a fuzzy Markov switching fault-tolerant controller such that the resulting closed-loop system is stochastically finite-time bounded with a mixed L2 - L-infinity/H-infinity performance level over a finite-time interval. Some sufficient conditions for the solvability of the above problem are given in terms of linear matrix inequalities by introducing a new mixed L2 - L-infinity/H-infinity performance function. Finally, a quarter-vehicle suspension model is employed to demonstrate the effectiveness of our proposed approach.
Multiobjective Fault-Tolerant Control for Fuzzy Switched Systems with Persistent Dwell Time and Its Application in Electric Circuits

Hao Shen,Mengping Xing,Zheng-Guang Wu,Shengyuan Xu,Jinde Cao

DOI: https://doi.org/10.1109/tfuzz.2019.2935685

IF: 12.253

2019-01-01

IEEE Transactions on Fuzzy Systems

Abstract:This article concentrates on the output feedback controller design problem for discrete-time nonlinear switched systems with actuator faults. The Takagi-Sugeno fuzzy model is adopted to approximate the nonlinearity of the plant with a set of local linear models. The persistent dwell-time (DT) switching law, which is more general than DT or average DT switching, is introduced to govern the switching among subsystems. In order to alleviate the effects of actuator failures on system stability and performance, a synthesized fault-tolerant output feedback controller ensuring various performance requirements is designed. Intensive attention is focused on establishing sufficient conditions, which can guarantee the exponential mean-square stability as well as the prescribed extended dissipativity property of the closed-loop system. By virtue of the Lyapunov stability theory and appropriate matrix transformation methods, the desired controller gains can be obtained by solving a convex optimization problem. The developed method is finally applied to address the control issue of a tunnel diode circuit system model to illustrate its efficiency and applicability.
Fault Detection and Fault-Tolerant Control of Paper Machines

QJ XIA,M RAO,YQ YING,YX SUN

DOI: https://doi.org/10.1016/s1474-6670(17)50260-8

1992-01-01

IFAC Proceedings Volumes

Abstract:This paper presents a model-based fault detection and fault-tolerant control technique for the pressurized headbox of a paper machine. A bank of Kalman filters is constructed corresponding to all the possible sensor failure modes. The possibility that each failure mode hypothesis is true is calculated using measurement innovations processes. The sensor failures are detected and located based on the calculated possibilities of the hypotheses. The controller and state estimator are automatically reorganized subsequent to the occurrence of failures to ensure the stability and good performance of the closed-loop system. The issues of system hardware redundancy and computational burden as well as implementai complexity are taken into account in the system design. Simulation results have shown satisfactory performance of the headbox control system after applying the presented technique.
Self-Healing Fault-Tolerant Control for High-Order Fully Actuated Systems Against Sensor Faults: A Redundancy Framework

Miao Cai,Xiao He,Donghua Zhou

DOI: https://doi.org/10.1109/tcyb.2023.3285903

IF: 11.8

2024-01-01

IEEE Transactions on Cybernetics

Abstract:This article presents a novel self-healing fault accommodation framework for high-order fully actuated systems (HOFASs) with sensor faults. Starting from the HOFAS model with nonlinear measurements, a $q$ -redundant observation proposition is derived from an observability normal form based on each individual measurement. On the heels of the ultimately uniformly bounded error dynamics, a definition of sensor fault accommodation is determined. After a necessary and sufficient accommodation condition is highlighted, a self-healing fault-tolerant control strategy is proposed, which can be applied in steady-state processes or transient processes. The main results are proved theoretically and illustrated experimentally.
A General H∞ Fault Tolerant Control and Management for a Linear System with Actuator Faults

Lijun Liu,Yi Shen,Earl H. Dowell,Chunhui Zhu

DOI: https://doi.org/10.1016/j.automatica.2012.05.018

IF: 6.4

2012-01-01

Automatica

Abstract:This brief paper investigates the optimal selection of online controllers for a linear system with actuator faults in the framework of H∞ control. The occurrence of actuator faults is modeled as a Markov chain to predict future faults. A compatible relationship of H∞ controllers is proposed for successive fault modes. In order to shrink the set of all H∞ controllers, seven methods are presented to construct a small set of controllers for different demands. Then five selection schemes are proposed to choose a proper controller from a given set of controllers for a given fault mode. Another selection scheme and a pre-selection scheme are presented when there might be false fault detection and identification. Considered together, they provide a powerful solution for all kinds of demands. A motivating example is used to illustrate the proposed methods.
MATHEMATICAL MODEL OF SELF-REPAIRING FLIGHT CONTROL

WANG Yong,ZHAN Xun-hui,WU Gang,HU Shou-song

DOI: https://doi.org/10.3969/j.issn.1005-1120.2003.02.009

2003-01-01

Abstract:The most prospective method for certain structural failures and damages that cannot employ redundancy is self-repairing techniques, to ensure especially the maximum flight safety. Based on the characters of self-repairing aircraft, this paper states some basic assumptions of the self-repairing aircraft, and puts forward some special new conceptions concerning the self-repairing aircraft: control input, operating input, command input, repair input and operating and control factor as well as their relationships. Thus it provides a simple and reliable mathematical model structure for the research on the self-repairing control of the aircraft.
Reconfigurable control system design for fault diagnosis and accommodation

Liang-Wei Ho,Gary G Yen

DOI: https://doi.org/10.1142/S0129065702001333

Abstract:The growing demand in system reliability and survivability under failures has urged ever-increasing research effort on the development of fault diagnosis and accommodation. In this paper, the on-line fault tolerant control problem for dynamic systems under unanticipated failures is investigated from a realistic point of view without any specific assumption on the type of system dynamical structure or failure scenarios. The sufficient conditions for system on-line stability under catastrophic failures have been derived using the discrete-time Lyapunov stability theory. Based upon the existing control theory and the modern computational intelligence techniques, an on-line fault accommodation control strategy is proposed to deal with the desired trajectory-tracking problems for systems suffering from various unknown and unanticipated catastrophic component failures. Theoretical analysis indicates that the control problem of interest can be solved on-line without a complete realization of the unknown failure dynamics provided an on-line estimator satisfies certain conditions. Through the on-line estimator, effective control signals to accommodate the dynamic failures can be computed using only the partially available information of the faults. Several on-line simulation studies have been presented to demonstrate the effectiveness of the proposed strategy. To investigate the feasibility of using the developed technique for unanticipated fault accommodation in hardware under the real-time environment, an on-line fault tolerant control test bed has been constructed to validate the proposed technology. Both on-line simulations and the real-time experiment show encouraging results and promising futures of on-line real-time fault tolerant control based solely upon insufficient information of the system dynamics and the failure dynamics.
Fault-Tolerant Control And Optimal Fault Hiding For Discrete-Time Linear Systems

juntong qi,zhenhua wang,yi shen

DOI: https://doi.org/10.1109/cyber.2015.7288143

2015-01-01

Abstract:This paper proposes a fault-tolerant control method for discrete-time linear systems with actuator fault. The proposed method is based on the fault hiding methodology. First, the considered system is converted as a single perturbed system representation and then a fault estimation observer is designed to estimate the fault. Based on the fault estimation result, a virtual actuator design method is proposed to achieve optimal fault hiding. The virtual actuator consists of a feedback part and a feedforward term. The feedback part is used to ensure the closed-loop stability and the feedforward term is designed to achieve optimal performance recovery. Finally, an aircraft example is simulated to demonstrate the effectiveness and performance of the proposed method.
Active Fault-Tolerant Control for a Class of Nonlinear Systems with Sensor Faults

Youqing Wang,Donghua Zhou,S. Joe Qin,Hong Wang

IF: 2.964

2008-01-01

International Journal of Control Automation and Systems

Abstract:A general active fault-tolerant control framework is proposed for nonlinear systems with sensor faults. According to their identifiability, all sensor faults are divided into two classes: identifiable faults and non-identifiable faults. In the healthy case, the control objective is such that all outputs converge to their given set-points. A fault detection and isolation module is firstly built, which can produce an alarm when there is a fault in the system and also tell us which sensor has a fault. If the fault is identifiable, the control objective remains the same as in the healthy case; while if the fault is non-identifiable, the control objective degenerates to be such that only the healthy outputs converge to the set-points. A numerical example is given to illustrate the effectiveness and feasibility of the proposed method and encouraging results have been obtained.
Performance-guaranteed adaptive self-healing control for wastewater treatment processes

Peihao Du,Xin Peng,Zhongmei Li,Linlin Li,Weimin Zhong

DOI: https://doi.org/10.1016/j.jprocont.2022.06.004

IF: 3.951

2022-08-01

Journal of Process Control

Abstract:This paper investigates the performance-guaranteed adaptive self-healing control for wastewater treatment processes (WWTPs), in which the non-ideal actuator, i.e., the actuator suffering from faults and constraints is considered. Firstly, an error conversion dynamic model based on a new prespecified-time performance function is presented to guarantee that the tracking error is quickly maintained in the user-defined area regardless of the occurrence of actuator faults and constraints. Secondly, a novel smooth approximation function is constructed to imitate the non-smooth characteristics of actuator constraints. Thirdly, the unknown bounds of non-ideal actuator parameters are estimated online in place of parameters themselves. Meanwhile, the lumped disturbances induced by the external disturbance and the fuzzy approximation error are suppressed via H∞ control theory. In addition, the stability analysis is carried out by the Lyapunov stability criterion to guarantee that all closed-loop system signals are bounded. Finally, comparative simulation results demonstrate that the proposed method has the superiorities in terms of preferable dynamic tracking performance with fast transient convergence, strong robustness and performance recovery under non-ideal actuator.

automation & control systems,engineering, chemical
Research on the Fault Self-recovery Principle of Equipment System

Gao Jinji

DOI: https://doi.org/10.3969/j.issn.1009-1742.2005.05.007

2005-01-01

Engineering Science

Abstract:Can mechanical faults be controlled and eliminated at machine's run-time? Can a machine heal itself, as a living person or animal? What can be done before shutting down and overhauling a machine? Under the guidance of the systemics theory,borrowing the idea of “self-recuperation" therapeutic methdology in modern medicinal science, e.g., the knowledge about the mechanisms of immunity, protection, compensation, regeneration, adaptation, etc., with the fault prevention and self-healing as the goal, this paper focuses on the study of the fault self-recovery principle and its engineering application, i.e. Fault Self-recovery Engineering (FSE), which can provide theoretical basis in developing a new generation of self-healing machine.
Fault Diagnosis and Reconfigurable Control for Flight Control Systems with Actuator Failures

KM Zhou,PK Rachinayani,N Liu,Z Ren,J Aravena

DOI: https://doi.org/10.1109/cdc.2004.1429644

2004-01-01

Abstract:In this paper we develop some fault diagnosis and reconfigurable control design techniques with possibly actuator failures for a special class of dynamic systems in which the full system states are reliably measurable and available for feedback and diagnosis. This class of dynamical systems is quite common in modern flight control systems. We have developed an analytic method for the detection and isolation of the actuator faults. We then further develop a robust reconfigurable state feedback controller design technique that guarantees stability and closed-loop performance under the actuator faults. A Boeing 747 model is used to demonstrate the design techniques.
Novel Approach for Fault-Tolerance Designing

Su-Nan Huang,Jixin Qian,Huihe Shao

DOI: https://doi.org/10.1109/icit.1994.467170

1994-01-01

Abstract:This paper is concerned with the design method of the control systems which possess fault-tolerance ability against actuator or sensor failures. A state feedback control law which retains asymptotically stable condition against arbitrary actuator failure is derived using a solution of a type of matrix equation and a constraint condition. The presented method is extended to the case of sensor failures. The effectiveness of the method is demonstrated with a numerical example
Fuzzy Adaptive Finite-Time Fault-Tolerant Control for Strict-Feedback Nonlinear Systems

Kangkang Sun,Lu Liu,Jianbin Qiu,Gang Feng

DOI: https://doi.org/10.1109/tfuzz.2020.2965890

IF: 12.253

2021-04-01

IEEE Transactions on Fuzzy Systems

Abstract:This article devotes to investigating the issue of fuzzy adaptive control for a class of strict-feedback nonlinear systems with nonaffine nonlinear faults. The computational complexity is reduced by adopting the dynamic surface control technique. Under the framework of finite-time stability, a novel fault-tolerant control strategy is designed so that the closed-loop system is semiglobally practically finite-time stable, and the tracking error converges to a small residual set in a finite time. Finally, simulation studies for an electromechanical system are shown to verify the feasibility of the presented approach.

computer science, artificial intelligence,engineering, electrical & electronic
H-infinite Control for Random Intermittent Actuator Fault of Discrete Systems with Model Uncertainties

Bin Guo,Yong Chen,Xia Liu

DOI: https://doi.org/10.23919/chicc.2017.8028523

2017-01-01

Abstract:In this paper, aiming at a class of systems subject to both state and input uncertainties, in which there is a random intermittent actuator fault, a passive dynamic output feedback fault-tolerant control strategy is proposed. The controller designed in this paper can ensure the stability of fault-free closed-loop system, moreover, can stabilize the closed loop system in finite time and guarantee the system meet H-infinite index when the actuator fault occurs. The stability of the system is proven through Lyapunov approach. Finally the numerical simulation results demonstrate the effectiveness of the proposed method.

Perfect Self-Repairing Control for a Kind of Fault System

Satisfactory Fault-Tolerant Controller Design for Uncertain Systems Subject to Actuator Faults

Data-Driven Optimal Fault-Tolerant Control for Unknown Linear Systems

Some basic problems about self-repairing flight control

Fault-tolerant Control for Fuzzy Switched Singular Systems with Persistent Dwell-Time Subject to Actuator Fault

Fault-tolerant Control for Time-Delay Systems Via Output Dynamical Feedback

Finite‐time Reliable ℒ 2 − ℒ ∞ /ℋ ∞ Control for Takagi–Sugeno Fuzzy Systems with Actuator Faults

Multiobjective Fault-Tolerant Control for Fuzzy Switched Systems with Persistent Dwell Time and Its Application in Electric Circuits

Fault Detection and Fault-Tolerant Control of Paper Machines

Self-Healing Fault-Tolerant Control for High-Order Fully Actuated Systems Against Sensor Faults: A Redundancy Framework

A General H∞ Fault Tolerant Control and Management for a Linear System with Actuator Faults

MATHEMATICAL MODEL OF SELF-REPAIRING FLIGHT CONTROL

Reconfigurable control system design for fault diagnosis and accommodation

Fault-Tolerant Control And Optimal Fault Hiding For Discrete-Time Linear Systems

Active Fault-Tolerant Control for a Class of Nonlinear Systems with Sensor Faults

Performance-guaranteed adaptive self-healing control for wastewater treatment processes

Research on the Fault Self-recovery Principle of Equipment System

Fault Diagnosis and Reconfigurable Control for Flight Control Systems with Actuator Failures

Novel Approach for Fault-Tolerance Designing

Fuzzy Adaptive Finite-Time Fault-Tolerant Control for Strict-Feedback Nonlinear Systems

H-infinite Control for Random Intermittent Actuator Fault of Discrete Systems with Model Uncertainties