Abstract:In the past decades, health evaluation and damage detection of large scale structures, especial large bridges, has attracted more and more attention. Among the damage detecting methods based on structural dynamic characteristic test, the strain mode (or the curvature mode) is proved to be much more sensitive than the traditional indexes (such as the natural frequencies and the displacement modes), and is regarded as one of the promising indexes to detect damage. However, up to now the strain mode method is not being widely used on the actual large scale structures yet. The method and instrumentation of dynamic strain measurement on field play as the role of bottle-neck. The method of estimating dynamic strain by two points displacement measurement, proposed in this paper, could be a simple and convenient way to obtain the dynamic strain and even to obtain the strain mode. The key of this method is the precise measurement of the large scale structures' vibration displacement with micron or sub-micron amplitude. Based on a kind of high sensitive low-frequency vibration transducer (DP transducer), the emphasis of this paper was put on the error analysis of this approach while used on field. The errors, including the transducer's placement error, the transducer's compatibility error and the transducer's frequency domain characteristic error, were analyzed. These errors' effects to dynamic strain measurement precision and the processing means of these errors were investigated too. The error analysis and processing illuminated that there is no very rigorous requirement to the placement of the transducers on structures, and the optimization of the transducer's characteristic is the sticking point of improving the testing precision of dynamic strain. Moreover, the appropriate signal processing could also reduce the effects of the errors and reckon the original dynamic strain. The analysis results provided some useful advices for the dynamic strain measurement on the actual large scale structures by the approach of two points displacement measurements.

Measurement of Dynamic Characteristics of Structure

Identification of Structural Dynamic Characteristics Based on Machine Vision Technology

Investigation of Time-Varying Natural Frequencies of High-Rise Buildings under Harsh Excitations Using a High-Resolution Combined Scheme

A Vision-Based System for Dynamic Displacement Measurement of Long-Span Bridges: Algorithm and Verification

Measurement of Machinery Vibration Using Laser Mode Split Technology

Dynamic strain measurement of large scale structures

A technique for measurement of ultrasonic waves propagating in time-varying media

Measurement and Active Control of Low Frequency Micro-Vibration Based on Dynamic Force Sensor

Vortex‐induced vibration measurement of a long‐span suspension bridge through noncontact sensing strategies

Out-of-plane Vibration Measuring Technique Based on Dynamic AFM

Speedy calibration of low frequency vibration transducer by using linear frequency modulation signal

Optical measurement system for bridge displacement and vibration

Dual straight-wing FBG accelerometer for low-frequency vibration measurement

Vibration Measurement of Smart Composite Structures by Using the New Intensity Modulated Optical Fiber Sensor

Broadband Dynamic Parameters Measurement by Longitudinal Vibration Testing Using Pulse Wave

Vibration Characteristics Measure System for Resonant Sensors

Active Low-frequency Vertical Vibration Isolation System for Precision Measurements

Field Measurement and Energy Analysis of Ground-Borne Vibration around High-Speed Railway Viaduct

A new approach to identification of structural damping ratios

A multi-cantilever beam low-frequency FBG acceleration sensor

Transverse load, static strain, temperature and vibration measurement using a cascaded FBG/EFPI/LPFG sensor system