A Genetic Algorithm with an Adaptive Chromosome Structure for Reconstruction of Radome Parameters Using A Gaussian Beam

ZQ Meng,T Takenaka,SL He

DOI: https://doi.org/10.1002/(sici)1098-2760(20000605)25:5<323::aid-mop9>3.0.co;2-2

IF: 1.311

2000-01-01

Microwave and Optical Technology Letters

Abstract:A genetic algorithm with an adaptive chromosome structure for reconstruction of radome parameters using a Gaussian beam

What problem does this paper attempt to address?

A Hybrid Dna Based Genetic Algorithm for Parameter Estimation of Dynamic Systems

Kan Dai,Ning Wang

DOI: https://doi.org/10.1016/j.cherd.2012.05.018

2012-01-01

Abstract:Inspired by the evolutionary strategy and the biological DNA mechanism, a hybrid DNA based genetic algorithm (HDNA-GA) with the population update operation and the adaptive parameter scope operation is proposed for solving parameter estimation problems of dynamic systems. The HDNA-GA adopts the nucleotides based coding and some molecular operations. In HDNA-GA, three new crossover operators, replacement operator, transposition operator and reconstruction operator, are designed to improve the population diversity, and the mutation operator with adaptive mutation probability is applied to guarantee against stalling at local peak. Besides, the simulated annealing based selection operator is used to guide the evolution direction. In order to overcome the premature convergence drawbacks of GAs and enhance the algorithm global and local search abilities, the population update operator and the adaptive parameter scope operator are suggested. Numerous comparative experiments on benchmark functions and real-world parameter estimation problems in dynamic systems are conducted and the results demonstrate the effectiveness and efficiency of the HDNA-GA.
Adaptive Dual-Subpopulation Genetic Algorithm and Its Application for Electromagnetic Devices Optimization

Bin Xu,Yingying Yao

DOI: https://doi.org/10.3969/j.issn.1000-6753.2013.03.026

2013-01-01

Abstract:An improved genetic algorithm, called adaptive dual-subpopulation genetic algorithm (ADSGA) is proposed to overcome the drawbacks of genetic algorithm (GA), such as premature convergence and deficiency of local search etc. Based on GA, ADSGA introduces the dual-subpopulation and adaptive termination condition based on the number of generation. During the manipulation of ADSGA, the best available individual is firstly obtained. Then the symmetric transformation of the currently population are operated via the best individual, which results in subpopulation. Thereafter environmental selection is applied to keep the elites of the original population and its rival to create new population for the next generation. By means of benchmark test function, ADSGA shows superior in convergence rate and robustness compared with GA.In the end, the proposed algorithm is applied to optimize superconducting magenetic energy storage system (SMES). The satisfying result proves the merit of ADSGA for electromagnetic devices optimization.
Array Optimization for MIMO Radar by Genetic Algorithms

Zhaoyang Zhang,Yongbo Zhao,Jingfang Huang

DOI: https://doi.org/10.1109/cisp.2009.5304413

2009-01-01

Abstract:In this paper, technique for the array optimization of multiple-input multiple-output (MIMO) radar is investigated. The primacy focus of this study is improved two-way pattern performance of MIMO radar. Genetic algorithms (GA) is applied to the array optimization in order to reduce the peaks of side lobes (PSL) by acting on the elements positions. By using the property that the two-way pattern of MIMO radar equals to the product of the transmitting and receiving beam patterns, the computational complexity of algorithms in this paper is significantly decreased. For MIMO radar system with separate transmitting and receiving arrays, and both of them are composed of 25-element with an overall aperture of 50lambda (lambda being the wavelength), the two-way pattern obtained in this paper with PSL do not exceed -28.65 dB, which meets the requirement of project applications.
Ambiguity Resolution Using Genetic Algorithm

ZHENG Qing-hui,ZHANG Yu-lin

DOI: https://doi.org/10.3969/j.issn.1001-2486.2001.01.002

2001-01-01

Abstract:A new algorithm based on genetic algorithm is formulated to ambiguity resolution. Integer Gauss transformation is used to reduce correction, then integer ambiguity is searched for in transformed space using genetic algorithm. Two mutation operators are used to avoid early convergence in the condition of small population size. Simulation shows the new algorithm is more robust and efficienct compare with SGA.
An Efficient Optimization Method for Antenna Arrays Using a Small Population Diploid Genetic Algorithm Based on Local RBF Networks

Fengling Peng,Xing Chen

DOI: https://doi.org/10.1109/tap.2024.3373196

IF: 5.7

2024-04-09

IEEE Transactions on Antennas and Propagation

Abstract:An enhanced diploid genetic algorithm (GA) is introduced for optimizing antenna arrays. Initially, several indicators are developed to measure the population state, thereby increasing the algorithm's responsiveness to variations in the antenna scheme. Subsequently, prevalent issues in antenna optimization are analyzed, leading to the introduction of a diploid GA aimed at preserving the diversity of antenna schemes, especially in a smaller population. This approach not only amplifies the exploration capacity of the algorithm but also addresses the issue of extensive simulation time. Furthermore, a local radial basis function (RBF) network is implemented for the assessment of some high-quality individuals (HQIs), which effectively reduces the simulation count. In this method, the position of each individual in the solution space is considered the centroid, around which samples are selected for each antenna scheme to construct an individual RBF network. This technique simplifies the correlation between antenna parameters and performance, consequently decreasing the required sample size. In addition, a local evolution acceleration mechanism (LEAM) is introduced to increase the convergence rate. The efficacy of the enhanced diploid GA is demonstrated through both test function experiments and a real-world application, showcasing its capability to efficiently optimize antenna arrays.

telecommunications,engineering, electrical & electronic
An Improved Genetic Algorithm for Global Optimization of Electromagnetic Problems

XD Chen,GZ Ni,SY Yang

DOI: https://doi.org/10.1109/20.952666

IF: 1.848

2002-01-01

IEEE Transactions on Magnetics

Abstract:An improved genetic algorithm (GA) for design optimization of electromagnetic devices is developed in this paper. Numerical test is done on a classical mathematical problem, and it shows that the proposed method has noticeable advantages over standard GAs. To demonstrate its applicability in engineering optimal design problems, the proposed algorithm, together with the charge simulation method, is used to solve the optimization of a bar-plane electrode model
Electromagnetic and Thermomechanical Design Method of Graded Dielectric Streamlined Radome Accelerated by Artificial Intelligence

Zekai Wang,Bingxun Liu,Zejia Liu,Licheng Zhou,Bao Yang,Zhenyu Jiang,Yiping Liu,Liqun Tang

DOI: https://doi.org/10.1109/tap.2024.3427433

IF: 5.7

2024-08-18

IEEE Transactions on Antennas and Propagation

Abstract:Streamlined radomes on hypersonic vehicles demand high electromagnetic (EM) performance and must possess robust thermomechanical performance to resist thermal loads. However, an efficient multidisciplinary design method considering these aspects is lacking. This communication proposes an EM and thermomechanical design method for streamlined radomes using a genetic algorithm (GA) accelerated by an artificial intelligence (AI) model. The method establishes thermomechanical performance as a constraint, with EM performance as the objective. The design cases of graded dielectric streamlined radomes with nine layers of silicon nitride ceramics at arbitrarily designated frequencies are used to demonstrate its effectiveness and efficiency. The results show that the designed radome has an average insertion loss less than 0.60 dB and a boresight error (BSE) within 3.00 mrad at any antenna scan angle for designated frequency bands. Meanwhile, the induced thermal stress remains within the safety threshold value. Notably, the utilization of AI accelerates the design process by approximately 90 times.

telecommunications,engineering, electrical & electronic
Beam control method for multi-array antennas based on improved genetic algorithm

Guojin Kan,Lutian Wang,Yanzheng Chen,Adel A. Bahaddad,Moaiad Ahmad Khder

DOI: https://doi.org/10.2478/amns.2021.1.00086

2021-12-27

Applied Mathematics and Nonlinear Sciences

Abstract:Abstract In the rapid development of modern science and technology, the human communication system has developed to 5G, and antenna in the related equipment research and technology application has also shown a positive role. With the increasing demand for antennas and their application scope, people have put forward more requirements on the beam shape of antennas. Therefore, it is very important to control the beam of multi-array antenna based on improved genetic algorithms in the new era. Therefore, on the basis of understanding the genetic algorithm and its application content, this paper studies the future development of related technologies based on the design content and test results of the broadband low-side lobe and high-gain microstrip display antenna developed in the new era.
Optimal design of anti-interrupted sampling repeater jamming waveform for missile-borne radar based on an improved genetic algorithm

Jianfeng Xu,Chuan He,Zi-Han Chen,Fei Cao,Xiaowei Feng

DOI: https://doi.org/10.1049/SIL2.12066

IF: 1.819

2021-07-08

IET Signal Processing

Abstract:The optimal design of transmitted waveforms to improve the performance of missile-borne radar in suppressing interrupted sampling repeater jamming (ISRJ) is studied here. The waveform diversity property requires that the waveform group has excellent orthogonality (good auto- and cross-correlation properties), which is an effective waveform optimisation design method for missile-borne radar electronic counter-countermeasures. The principle of orthogonal phase coding waveform against ISRJ is studied and the use of chaotic sequences is proposed to initialise the population, as well as a simulated annealing selection operator, which improves the convergence speed of the improved genetic algorithm (IGA) and enhances the global optimisation ability. The IGA improves the shortcomings of GA, that is, easily falling into a local optimum and slow search speed, and can realise a global search for longer orthogonal polyphase coding sequence sets. The simulation examples demonstrate the good jamming suppression performance of the proposed method.

Computer Science,Engineering
Radiation Pattern Synthesis for Arrays of Conformal Antennas Mounted on an Irregular Curved Surface Using Modified Genetic Algorithms

Y. -J. Zhang,S. -X. Gong,Y. -X. Xu

DOI: https://doi.org/10.1163/156939309789108589

2009-01-01

Journal of Electromagnetic Waves and Applications

Abstract:An E-shaped conformal microstrip antenna array mounted on an irregular curved surface which is similar to an aerocraft cavity in shape is developed in this paper. In view of the narrow bandwidth of the microstrip antenna, an E-shaped element is applied instead of the traditional rectangular element. Furthermore, an element structure of uneven thickness is adopted in order to take into account the effects of the carrier on the resonance frequency and bandwidth of the conformal array. Then, an 8-element conformal microstrip antenna array is designed and the radiation pattern is synthesized using the modified genetic algorithms (MGAs). Compared with the standard genetic algorithms (SGAs), MGAs has a much more fast convergence speed and need less computational time to reach the expected value. The result shows that the optimized azimuth radiation pattern is almost omnidirectional and the elevation radiation pattern is concentrated in the horizontal direction. It can be seen that the proposed method of MGAs is an effective means for designing the conformal antenna array on an irregular curved surface.
A Genetic Algorithm for Chromaticity Correction in Diffraction Limited Storage Rings

M. P. Ehrlichman

DOI: https://doi.org/10.1103/PhysRevAccelBeams.19.044001

2016-04-15

Abstract:A multi-objective genetic algorithm is developed for optimizing nonlinearities in diffraction limited storage rings. This algorithm determines sextupole and octupole strengths for chromaticity correction that deliver optimized dynamic aperture and beam lifetime. The algorithm makes use of dominance constraints to breed desirable properties into the early generations. The momentum aperture is optimized indirectly by constraining the chromatic tune footprint and optimizing the off-energy dynamic aperture. The result is an effective and computationally efficient technique for correcting chromaticity in a storage ring while maintaining optimal dynamic aperture and beam lifetime. This framework was developed for the Swiss Light Source (SLS) upgrade project.

Accelerator Physics
High-Accuracy Beam Generation and Scanning Using Reconfigurable Coding Metasurface

Xinyu Zhang,Xiangkun Kong,Shaochun Zhou,Peiqi Liu,Yukun Zou,Jianlai Chen,Xiaoyu Pang,Steven Gao

DOI: https://doi.org/10.1088/1361-6463/ad5aa9

2024-06-22

Journal of Physics D Applied Physics

Abstract:Metasurface technology has attracted widespread attention, owing to its remarkable capability to control electromagnetic properties. In this letter, we design a reconfigurable reflective metasurface array operating at 5 GHz for beam generation and scanning based on coding metasurface. Field programmable gate array (FPGA) is equipped for switching the states of PIN (positive-intrinsic-negative) diodes loaded on the metasurface in real-time, resulting in a 180° phase difference. To obtain multi-beam radiation and high-accuracy beam steering, the coding sequence to produce the target radiation pattern is calculated by an algorithm program. We design the fitness function of a genetic algorithm (GA) to optimize the sequence corresponding to the target directions. The simulation result shows that with the accuracy of 1°, the proposed metasurface is capable of generating multi-beam and scanning two-dimensional beams within the 50° range. Further, we fabricate and measure a prototype sample of 15×15 elements, which is verified feasible by comparing the measured result and the simulation. This work demonstrates the great potential of applying this reflective metasurface to wireless communication or radar.

physics, applied
Using GA to Design Discrete Frequency-Coding Waveform for Orthogonal Multistatic ISAR

Jia Xu,J. Xu,Xizeng Dai,Yingning Peng

DOI: https://doi.org/10.1109/apsar.2007.4418566

2007-01-01

Abstract:In this paper, we discussed how to use the genetic algorithm(GA) to design discrete frequency-hopping waveforms for orthogonal multistatic ISAR (inverse synthetic aperture radar). Based on the novel and creative using of GA, the optimization problem is well solved and the design results have good performance in auto-correlation and cross-correlation. The obtained results in this paper can be implemented in real multistatic ISAR systems.
Algorithms for Design of Gamma Knife

Pengfei Hao

2003-01-01

Abstract:The possible location of shots' centers is obtained, using the Erosion method, and the shots are then constrained within the area. The Genetic algorithm is used to search for the possible location of shots' centers, and find out the radius and the best location of every shot. The Genetic Algorithm is studied with emphasis on encoding scheme, initialization, evaluation function and crossover operation. The operator does not require that the function to be optimized continuous or differentiable, and the increased computation demand is little. Some examples designed using the approach are given to show that the shots can cover more than 90% of the target volume.
Simultaneous Optimization of Beam Emittance and Dynamic Aperture for Electron Storage Ring Using Genetic Algorithm

Weiwei Gao,Lin Wang,Weimin Li

DOI: https://doi.org/10.1103/physrevstab.14.094001

2011-01-01

Physical Review Special Topics - Accelerators and Beams

Abstract:Finding a high quality of lattice that simultaneously meets low beam emittance performance and acceptable dynamic aperture is a challenging task for the storage ring-based light source, especially for the next generation storage ring which is characterized with ultralow beam emittance. This paper presents an alternative method, based on the concept of genetic algorithm, to simultaneously optimize the beam emittance and dynamic aperture for low emittance lattice. Instead of analyzing the nonlinear indicators extracted from the high order nonlinear map, the algorithm can globally optimize the nonlinear performance by the direct dynamic aperture tracking result. So this method is more straightforward and efficient than analyzing the nonlinear driving terms. In order to illustrate this method, the quadrupole and sextupole strengths of a five-bend-achromatic lattice are simultaneously optimized by nondominated sorting genetic algorithm II (NSGA-II). Finally, the optimal linear optics for ultralow emittance lattices with better dynamic aperture are obtained. The result shows that the algorithm is particularly useful for the low emittance lattice design, where the beam emittance and the dynamic aperture always conflict with each other.
An Adaptive Genetic Algorithm for determining optimal structures for atomic clusters

Brandon Willnecker,Mervlyn Moodley

2024-11-27

Abstract:The implementation of adaptive genetic algorithms (AGA) for optimization problems has proven to be superior than many other methods due to its nature of producing more robust and high quality solutions. Considering the complexity involved in many-body simulations, a novel AGA is proposed for applications to such systems and is specifically used to determine the lowest energy structures of various sized atomic clusters. For demonstrative purposes, we apply our method to various sized Lennard-Jones clusters and show that our results are more accurate than those found in the literature employing different methods.

Computational Physics
Design for 2D anisotropic photonic crystal with large absolute band gaps by using a genetic algorithm

Zhuo Ye,Linfang Shen,Sailing He

DOI: https://doi.org/10.1140/epjb/e2004-00075-3

2004-01-01

Abstract:. A 2-state genetic algorithm (GA) approach is used to design a two-dimensional (2D) anisotropic photonic crystal of square lattice with a maximal absolute band gap. The unit cell is devided equally into many small squares, and each filling pattern of squares with two dielectric materials corresponds to a binary number. As a numerical example, the GA gives a 2D Te structure with a relative width of the absolute band gap of about 23% . After a further optimization, a new structure is obtained with a relative width of the absolute band gap of about 28% .
Efficient optimization of an accelerator neutron source for neutron capture therapy using genetic algorithms

Yulin Ge,Yao Zhong,Isao Murata,Shingo Tamaki,Nan Yuan,Yanbing Sun,Wei Ma,Liping Zou,Zhen Yang,Liang Lu

DOI: https://doi.org/10.1002/mp.17132

2024-05-12

Abstract:Background: In recent years, genetic algorithms have been applied in the field of nuclear technology design, producing superior optimization results compared to traditional methods. They can be employed in the design and optimization of beam shaping assemblies (BSA) BSA to obtain the desired neutron beams. But it should be noted that the direct combination of Monte Carlo methods with genetic algorithms requires a significant amount of computational resources and time. Purpose: Design and optimize BSA more efficiently to achieve neutron beams that meet specified recommendations. Methods: We propose an approach of NSGA II with crucial variables which are identified by multivariate statistical techniques. This approach significantly reduces the problem sizes, thus reducing the time required for optimization. We illustrate this methodology using the example of BSA design for AB-BNCT. Results: The computational efficiency has tripled with crucial variables. By using NSGA II, we obtained optimized models conforming to both the new and old version IAEA BNCT guidelines through a single optimization process and subjected them to phantom analysis. The results demonstrate that models obtained through this method can meet the IAEA recommendations with deep advantage depth (AD) and high absorbed ratio (AR). Conclusion: The genetic algorithm with crucial variables displays tremendous potential in addressing BSA optimization challenges.
Center Based Genetic Algorithm and Its Application to the Stiffness Equivalence of the Aircraft Wing

Jia-qing Zhao,Ling Wang

DOI: https://doi.org/10.1016/j.eswa.2010.11.106

IF: 8.5

2010-01-01

Expert Systems with Applications

Abstract:In this paper, a kind of Center Based Genetic Algorithm (CBGA) is proposed to overcome the premature convergence and to solve the stiffness equivalence problem. With the information of population center, central chaotic mutation and space shrinking strategy are designed to guide the evolutionary searching process. Meanwhile, the rank value based roulette selection and a new Cauchy preferential crossover operator are collaboratively used with the mutation operators in the CBGA. To avoid the loss of the best solution, the elitist strategy is employed as well. In addition, local search is embedded in the CBGA after the main evolutionary search process to enhance the exploitation ability by further improving the elite solution. Numerical simulation and comparison based on a set of benchmark functions show that, the proposed CBGA is superior to the hybrid genetic algorithm from the literature in terms of searching efficiency, solution quality, robustness and success ratio. Finally, CBGA is applied to successfully solve the stiffness equivalence problem of the small-aspect-ratio aircraft wing to tapered beam.
Adaptive Genetic Algorithm for Crystal Structure Prediction

S. Q. Wu,M. Ji,C. Z. Wang,M. C. Nguyen,X. Zhao,K. Umemoto,R. M. Wentzcovitch,K. M. Ho

DOI: https://doi.org/10.1088/0953-8984/26/3/035402

2013-11-02

Abstract:We present a genetic algorithm (GA) for structural search that combines the speed of structure exploration by classical potentials with the accuracy of density functional theory (DFT) calculations in an adaptive and iterative way. This strategy increases the efficiency of the DFT-based GA by several orders of magnitude. This gain allows considerable increase in size and complexity of systems that can be studied by first principles. The method's performance is illustrated by successful structure identifications of complex binary and ternary inter-metallic compounds with 36 and 54 atoms per cell, respectively. The discovery of a multi-TPa Mg-silicate phase with unit cell containing up to 56 atoms is also reported. Such phase is likely to be an essential component of terrestrial exoplanetary mantles.

Materials Science

A Genetic Algorithm with an Adaptive Chromosome Structure for Reconstruction of Radome Parameters Using A Gaussian Beam

A Hybrid Dna Based Genetic Algorithm for Parameter Estimation of Dynamic Systems

Adaptive Dual-Subpopulation Genetic Algorithm and Its Application for Electromagnetic Devices Optimization

Array Optimization for MIMO Radar by Genetic Algorithms

Ambiguity Resolution Using Genetic Algorithm

An Efficient Optimization Method for Antenna Arrays Using a Small Population Diploid Genetic Algorithm Based on Local RBF Networks

An Improved Genetic Algorithm for Global Optimization of Electromagnetic Problems

Electromagnetic and Thermomechanical Design Method of Graded Dielectric Streamlined Radome Accelerated by Artificial Intelligence

Beam control method for multi-array antennas based on improved genetic algorithm

Optimal design of anti-interrupted sampling repeater jamming waveform for missile-borne radar based on an improved genetic algorithm

Radiation Pattern Synthesis for Arrays of Conformal Antennas Mounted on an Irregular Curved Surface Using Modified Genetic Algorithms

A Genetic Algorithm for Chromaticity Correction in Diffraction Limited Storage Rings

High-Accuracy Beam Generation and Scanning Using Reconfigurable Coding Metasurface

Using GA to Design Discrete Frequency-Coding Waveform for Orthogonal Multistatic ISAR

Algorithms for Design of Gamma Knife

Simultaneous Optimization of Beam Emittance and Dynamic Aperture for Electron Storage Ring Using Genetic Algorithm

An Adaptive Genetic Algorithm for determining optimal structures for atomic clusters

Design for 2D anisotropic photonic crystal with large absolute band gaps by using a genetic algorithm

Efficient optimization of an accelerator neutron source for neutron capture therapy using genetic algorithms

Center Based Genetic Algorithm and Its Application to the Stiffness Equivalence of the Aircraft Wing

Adaptive Genetic Algorithm for Crystal Structure Prediction