Abstract:Copper calcium titanate (CaCu3Ti4O12, CCTO) ceramics are receiving a great deal of attention for advanced electronic and energy storage device applications owing to their giant permittivity response and good temperature stability. However, the development and real applications of CCTO ceramics are generally restricted by their large dielectric loss and low breakdown electric field strength. In the present study, a novel type of perovskite-like Na-1/3(Ca1/2Sr1/2)(1/3)(Bi1/2Y1/2)(1/3)Cu3Ti4O12 (NCSBYCTO) ceramics were designed via multiple elements strategy based on the high-entropy concept. Consequently, all the NCSBYCTO ceramics present a giant permittivity response (10(3)similar to 10(4)), good stability of temperature and frequency, and remarkable relaxation characteristics, especially the NCSBYCTO ceramic sintered at 1050 degrees C exhibits a relative balance between the giant permittivity of about 7.0 x 10(3)-9.5 x 10(3) and the lower dielectric loss of approximately 0.043-0.294 at a frequency range of 10(4)-10(6) Hz under room temperature. Furthermore, all the NCSBYCTO ceramics present an obvious nonlinear characteristic. More encouragingly, a higher breakdown field strength of around 2552.56 V/cm accompanied by a larger nonlinear coefficient of about 6.48 is achieved in the NCSBYCTO ceramic sintered at 1070 degrees C. A significant electrical heterogeneity structure and electron defect structure induced by the existence of mixed-valence Cu+/Cu2+ and Ti3+/Ti4+ are also found in the NCSBYCTO ceramics. The giant permittivity response, low dielectric loss and improved nonlinear properties can be considered the synergistic effect of the defect mechanism and the internal barrier layer capacitor model. This finding offers a route for designing giant permittivity ceramics with brilliant dielectric properties and nonlinear behaviors, which is expected to benefit dual-functional device applications of capacitors and varistors.

Studies of non-stoichiometrical ferroelectric cathode materials

The Principle of the Ferroelectric Cathode and Its Typical Application

Preparation and Characteristics of Ferroelectric Cathode

Simulation And Experimental Investigations Of An Efficient And Stable Ferroelectric Cathode

Superior integrated field emission cathode with ultralow turn‐on field and high stability based on SiC nanocone arrays

Electron Emission from Lead Lanthanum Zirconate Titanate Ferroelectric Cathodes

Luminescence modulation behavior upon in-situ electric field of Sm3+ doped KSr2Nb5O15 ferroelectric ceramics

Large Electrostrictive Effect and High Optical Temperature Sensitivity in Er3+-modified (K0.5na0.5)nbo3-Based Ferroelectric Ceramics

Influence of Sm3+ doping on the relaxation behaviors of KSr2Nb5O15 ferroelectric ceramics and the luminescence modulation effect by polarization engineering

Performance of ceramic cathode current collector with novel microstructure for solid oxide fuel cells

Enhanced Ferroelectric Properties In Bi0.86sm0.14feo3-Based Ceramics

Electron Emission from Barium Strontium Titanate Ceramics

Stable relaxor ferroelectric phase of NaNbO3-based ceramic with superb energy storage performances

Giant Permittivity Response and Enhanced Nonlinear Electrical Properties in a Novel Perovskite-Like Ceramic with Multiple Elements

Realization of high electric performance in Aurivillius ferroelectrics via combining chemical substitution and the construction of new-type solid solution systems

Evolution of Microstructure, Defect, Optoelectronic and Magnetic Properties of Cu1-xCaxFeO2 Ceramics

Sm3+-doped KNNS ferroelectric ceramics with enhanced photoluminescence by polarization-field-modulation

Ferroelectricity and Magnetoelectric Coupling in Hexagonal Lu0.5In0.5FeO3 Ceramics

Synergically Enhanced Piezocatalysis Performance of Eco-Friendly (k0.52na0.48)nbo3 Through Ferroelectric Polarization and Defects

Domain Engineering in Bulk Ferroelectric Ceramics via Mesoscopic Chemical Inhomogeneity

Enhancement in hybrid improper ferroelectricity of Ca3Ti2O7 ceramics by a two-stage sintering