Abstract:Advancements in instrumentation support improved powered ankle prostheses hardware development. However, control algorithms have limitations regarding number and type of sensors utilized and achieving autonomous adaptation, which is key to a natural ambulation. Surface electromyogram (sEMG) sensors are promising. With a minimized number of sEMG inputs an economic control algorithm can be developed, whereas limiting the use of lower leg muscles will provide a practical algorithm for both ankle disarticulation and transtibial amputation. To determine appropriate sensor combinations, a systematic assessment of the predictive success of variations of multiple sEMG inputs in estimating ankle position and moment has to conducted. More importantly, tackling the use of nonnormalized sEMG data in such algorithm development to overcome processing complexities in real-time is essential, but lacking. We used healthy population level walking data to (1) develop sagittal ankle position and moment predicting algorithms using nonnormalized sEMG, and (2) rank all muscle combinations based on success to determine economic and practical algorithms. Eight lower extremity muscles were studied as sEMG inputs to a long-short-term memory (LSTM) neural network architecture: tibialis anterior (TA), soleus (SO), medial gastrocnemius (MG), peroneus longus (PL), rectus femoris (RF), vastus medialis (VM), biceps femoris (BF) and gluteus maximus (GMax). Five features extracted from nonnormalized sEMG amplitudes were used: integrated EMG (IEMG), mean absolute value (MAV), Willison amplitude (WAMP), root mean square (RMS) and waveform length (WL). Muscle and feature combination variations were ranked using Pearson's correlation coefficient (r > 0.90 indicates successful correlations), the root-mean-square error and one-dimensional statistical parametric mapping between the original data and LSTM response. The results showed that IEMG+WL yields the best feature combination performance. The best performing variation was MG + RF + VM ( r position = 0.9099 and r moment = 0.9707) whereas, PL ( r position = 0.9001, r moment = 0.9703) and GMax+VM ( r position = 0.9010, r moment = 0.9718) were distinguished as the economic and practical variations, respectively. The study established for the first time the use of nonnormalized sEMG in control algorithm development for level walking.

An Intelligent Above-Knee Prosthesis with EMG-based Terrain Identification

Terrain Identification for Prosthetic Knees Based on Electromyographic Signal Features

Study on Intelligent Trans-Femoral Prosthesis with Terrain Identification

Adaptive Slope Walking With a Robotic Transtibial Prosthesis Based on Volitional EMG Control

Real-time Terrain Mode Recognition Module for the Control of Lower-limb Prosthesis

A fuzzy logic based terrain identification approach to prosthesis control using multi-sensor fusion

A Wearable Computer Vision System With Gimbal Enables Position-, Speed-, and Phase-Independent Terrain Classification for Lower Limb Prostheses

Myoelectric-Based Estimation of Vertical Ground Reaction Force During Unconstrained Walking by a Stacked One-Dimensional Convolutional Long Short-Term Memory Model

A robotic emulator for the systematic exploration of transtibial biarticular prosthesis designs

Knee Angle Estimation from Surface EMG during Walking Using Attention-Based Deep Recurrent Neural Networks: Feasibility and Initial Demonstration in Cerebral Palsy

Promise of using surface EMG signals to volitionally control ankle joint position for powered transtibial prostheses.

Powered Prosthesis Locomotion on Varying Terrains: Model-Dependent Control with Real-Time Force Sensing

Design of EMG-driven Musculoskeletal Model for Volitional Control of a Robotic Ankle Prosthesis

Fuzzy-Logic-Based Terrain Identification with Multisensor Fusion for Transtibial Amputees

Gait Event Detection with Proprioceptive Force Sensing in a Powered Knee-Ankle Prosthesis: Validation over Walking Speeds and Slopes

Volitional EMG Control Enables Stair Climbing with a Robotic Powered Knee Prosthesis

Hybrid Functional Near-Infrared Spectroscopy System and Electromyography for Prosthetic Knee Control

A Terrain-based Gait Self-adjusting Planning for Powered Prostheses

The use of nonnormalized surface EMG and feature inputs for LSTM-based powered ankle prosthesis control algorithm development

Beyond Gait: Learning Knee Angle for Seamless Prosthesis Control in Multiple Scenarios

Real-Time Gait Phase and Task Estimation for Controlling a Powered Ankle Exoskeleton on Extremely Uneven Terrain