Pervaporation Characteristics and Structure of Poly(vinyl Alcohol)/poly(ethylene Glycol)/tetraethoxysilane Hybrid Membranes
Li Yi Ye,Qing Lin Liu,Qiu Gen Zhang,Ai Mei Zhu,Guo Bo Zhou
DOI: https://doi.org/10.1002/app.26446
IF: 3
2007-01-01
Journal of Applied Polymer Science
Abstract:Poly(vinyl alcohol) (PVA) blended with poly(ethylene glycol) (PEG) was crosslinked with tetraethoxysilane (TEOS) to prepare organic-inorganic PVA/ PEG/TEOS hybrid membranes. The membranes were then used for the dehydration of ethanol by pervaporation (PV). The physicochemical structure of the hybrid membranes was studied with Fourier transform infrared spectra (FTIR), wide-angle X-ray diffraction WXRD, and scanning electron microscopy (SEM). PVA and PEG were crosslinked with TEOS, and the crosslinking density increased with increases in the TEOS content, annealing temperature, and time. The water permselectivity of the hybrid membranes increased with increasing annealing temperature or time; however, the permeation fluxes decreased at the same time. SEM pictures showed that phase separation took place in the hybrid membranes when the TEOS content was greater than 15 wt %. The water permselectivity increased with the addition of TEOS and reached the maximum at 10 wt % TEOS. The water permselectivity decreased, whereas the permeation flux increased, with an increase in the feed water content or feed temperature. The hybrid membrane that was annealed at 130 degrees C for 12 h exhibited high permselectivity with a separation factor of 300 and a permeation flux of 0.046 kg m(-2) h(-1) in PV of 15 wt % water in ethanol. (c) 2007 Wiley Periodicals, Inc.