Dynamic method of assessing seismic casualties

赵振东,郑向远,钟江荣

DOI: https://doi.org/10.3969/j.issn.1000-1301.1999.04.023

1999-01-01

Abstract:引入了初始人员伤亡矩阵的概念，并借助于几个概率分布函数确定了砖砌体结构的初始人员伤亡矩阵，建立了地震人员伤亡动态量化评估方法，并以唐山地震为例使用该方法进行再评估，得到了一些应用结果。

What problem does this paper attempt to address?

Numerical simulation and assessment of Tangshan seismic casualties

Zhendong Zhao,Xiangyuan Zheng

DOI: https://doi.org/10.3969/j.issn.1000-1301.2006.03.006

IF: 2.8

2006-01-01

Earthquake Engineering and Engineering Vibration

Abstract:By using the index and state-function of casualties the authors proposed,the initial seismic casualties' matrix was formed.After determining the initial casualties' matrix of brick masonry structure with the aid of several probability distribution functions,the dynamic assessment method of seismic casualties was established.Then the authors carried out the numerical simulation and assessment of Tangshan seismic casualties by using this method.
THE INDEX AND STATE-FUNCTION OF CASUALTIES IN EARTHQUAKE

Zhengdong Zhao,Junqi Lin,Jiangrong Zhong,Xiangyuan Zheng,Yichao WANG

DOI: https://doi.org/10.3969/j.issn.1004-4574.1998.03.015

1998-01-01

Abstract:定义了地震人员伤亡指数和初始人员伤亡指数，构筑了人员伤亡状态函数，并进行了参数分析。
Study On The Earthquake Casualty Estimation Based On Monte-Carlo Simulation Method

Zhang Xiao-Le,Chen Jian-Guo,Yuan Hong-Yong

2012-01-01

Abstract:In 20th century and in early 21st century, there were some massive earthquakes in China. In order to make arrangement and deployment plan during post-earthquake relief work, the reliable earthquake death toll estimation is very valuable for disaster relief headquarters and civil administration departments. In this study, two aspects of the casualty estimation have been conducted. First, a casualty prediction system for earthquake based on GIS has been developed. Basic maps, primary data, critical infrastructure data, utility databases, asset databases, et. al. are collected as the inputs and parameters in the system. The building collapse probability with reasonable interval was given based on its vulnerability matrix. The prediction system can produce the casualty results with reasonable range. Second, a dynamic model for assessing seismic casualties is introduced, and Monte-Carlo numerical simulation method was used to investigate the deterioration of the trapped survivors' health condition over the trapped time, which may be important and useful in directing the rescue activities.
Probabilistic Assessment of Seismic Stability of a Rock Slope by Combining the Simulation of Stochastic Ground Motion with Permanent Displacement Analysis

Qing Lu,Peng Chen,Byungmin Kim,Jun Zheng,Jian Ji

DOI: https://doi.org/10.1016/j.enggeo.2019.105210

IF: 6.902

2019-01-01

Engineering Geology

Abstract:A probabilistic framework that considers the variability and uncertainty of the ground motions caused by earthquakes and the parameters of the slope material is proposed to assess the seismic stability of rock slopes. A stochastic ground motion simulation method, which reflects certain earthquake scenarios and site characteristics, was used to generate accelerograms as seismic inputs. Then, the probabilities of failure (Pf) of the slopes when subjected to earthquake ground motions were computed via Monte-Carlo simulations based on the simulated ground motions and the decoupled Newmark permanent-displacement analysis. An example rock slope was used to illustrate the proposed procedure and verify its rationality. The results showed that the magnitudes of the earthquakes and the source-to-site distances had significant influences on the seismic stability of the slopes. For an earthquake of the same magnitude, the Pf of the slope decreased rapidly as the source-to-site distance increased. In addition, given the same source-to-site distance, the Pf of the slope increased steadily as the magnitudes of the earthquakes increased. Also, it was found that the influence of coefficient of variation of the slope's shear strength parameters (i.e., c, φ) was not negligible when the uncertainty of earthquakes was not considered. However, it may be overshadowed by the significant influence of a great earthquake, especially when the variability of ground motions is taken into account. The results that were obtained agreed well with observed earthquake-induced landslide phenomena and the statistical data of two typical earthquakes that occurred in Japan and China, which implies that the proposed method is accurate.
Analysis of dynamic reliability of offshore jacket platforms subjected to seismic action

金伟良,郑忠双,李海波

DOI: https://doi.org/10.3785/j.issn.1008-973X.2002.03.001

2002-01-01

Abstract:This work applied the structural dynamic response theory and the stochastic theory to develop a method for dynamic reliability analysis of offshore jacket platforms subjected to seismic action. In this method, the random variables that mainly affect the response characteristics of offshore platforms were selected and sampled. The stochastic responses of offshore platforms to these random variables and subjected to seismic action were analyzed. Statistical analysis of the response parameters yielded a probabilistic function describing the response of the platform to seismic action. Finally dynamic reliability of offshore platforms can be achieved by proper application of the limit state function of the integrated platform structure under dynamic conditions. By means of the method proposed in this paper, the dynamic reliability of the Weizhou 11-4C offshore platform subjected to seismic action was evaluated. The Weizhou 11-4C platform is a tripod-legs simple jacket platform located at the Gulf of Weizhou, South China Sea. In the dynamic reliability analysis, the influences of earthquake intensity, direction and occurrence frequency were considered. The analysis results showed that the responses of the Wei114-4C platform considering the pile-soil-structure mutual interaction were less than those of a fixed platform with 6 times the diameter, and that the dynamic reliability index of Weizhou 11-4C offshore platforms was high and the failure probability was very low. So the Wei11-4C platform subjected to seismic action is safe.
A Modified Newmark Method for Calculating Permanent Displacement of Seismic Slope Considering Dynamic Critical Acceleration

Yulong Cui,Aijuan Liu,Chong Xu,Jun Zheng

DOI: https://doi.org/10.1155/2019/9782515

IF: 1.843

2019-01-01

Advances in Civil Engineering

Abstract:Newmark permanent displacement is an important index for evaluating seismic slope stability, which has been widely used in recent years. The traditional Newmark sliding method assumes that the critical acceleration is constant but does not consider the inhomogeneity and dynamic reduction process of shear strength on the sliding surface, presumably leading to underestimation of the permanent displacement. In this paper, this problem is analyzed, and a new method for calculating permanent displacement of seismic slope considering dynamic critical acceleration is proposed, in which the Monte Carlo simulation is used. Example calculations indicate that this approach permits to show the dropping cohesion and the dynamic critical acceleration of the slide block during the earthquake time history. The improved method for calculating seismic slope permanent displacement presented in this paper solves the problem that the calculated value from the Newmark sliding method is smaller than the real value and is a useful improvement.
A Numerical Method of Lower Bound Dynamic Shakedown Analysis for 3D Structures

Guichen Zhang,Heng Peng,Hongtao Zhang,Juzhen Tang,Yinghua Liu

DOI: https://doi.org/10.1108/ec-08-2020-0484

2021-01-01

Engineering Computations

Abstract:Purpose The safety assessment of engineering structures under repeated variable dynamic loads such as seismic and wind loads can be considered as a dynamic shakedown problem. This paper aims to extend the stress compensation method (SCM) to perform lower bound dynamic shakedown analysis of engineering structures and a double-closed-loop iterative algorithm is proposed to solve the shakedown load. Design/methodology/approach The construction of the dynamic load vertexes is carried out to represent the loading domain of a structure under both dynamic and quasi-static load. The SCM is extended to perform lower bound dynamic shakedown analysis of engineering structures, which constructs the self-equilibrium stress field by a series of direct iteration computations. The self-equilibrium stress field is not only related to the amplitude of the repeated variable load but also related to its frequency. A novel double-closed-loop iterative algorithm is presented to calculate the dynamic shakedown load multiplier. The inner-loop iteration is to construct the self-equilibrated residual stress field based on the certain shakedown load multiplier. The outer-loop iteration is to update the dynamic shakedown load multiplier. With different combinations of dynamic load vertexes, a dynamic shakedown load domain could be obtained. Findings Three-dimensional examples are presented to verify the applicability and accuracy of the SCM in dynamic shakedown analysis. The example of cantilever beam under harmonic dynamic load with different frequency shows the validity of the dynamic load vertex construction method. The shakedown domain of the elbow structure varies with the frequency under the dynamic approach. When the frequency is around the resonance frequency of the structure, the area of shakedown domain would be significantly reduced. Research limitations/implications In this study, the dynamical response of structure is treated as perfect elastoplastic. The current analysis does not account for effects such as large deformation, stochastic external load and nonlinear vibration conditions which will inevitably be encountered and affect the load capacity. Originality/value This study provides a direct method for the dynamical shakedown analysis of engineering structures under repeated variable dynamic load.
Research on Dynamic Assessment Method of Earthquake Scene Rescue Performance Based on AHP and Cloud Model

Sining Huang,Yupeng Chen,Xusheng Feng,Tiantian Qiao,Dandan Yu,Yongqiang Yang

DOI: https://doi.org/10.3390/math10020207

IF: 2.4

2022-01-10

Mathematics

Abstract:In view of the ambiguity and randomness of the assessment of earthquake scene rescue performance, this paper proposes an integrated assessment method considering quantitative and qualitative influencing factors from three levels: search, rescue and medical treatment. Firstly, this study constructs an assessment index system of rescue performance at the earthquake scene based on the International Search and Rescue Advisory Group (INSARAG) guidelines set by International Search and Response. Secondly, the subjective weights and objective weights of each index were calculated using the hierarchical analysis process (AHP) and cloud model, respectively. The comprehensive weights were calculated using weighted analysis, and the performance assessment results were visually expressed by cloud model images. Finally, the study was applied to an earthquake rescue case with an initial assessment of 4.0065, and its performance was improved by 4.36% when the rescue process was optimized. The assessment results show that earthquake rescue performance can be estimated, and the rationality and effectiveness of the method was validated.

mathematics
Rapid Estimation of Earthquake Fatalities in Mainland China Based on Physical Simulation and Empirical Statistics-A Case Study of the 2021 Yangbi Earthquake

Yilong Li,Zhenguo Zhang,Wenqiang Wang,Xuping Feng

DOI: https://doi.org/10.3390/ijerph19116820

2022-06-02

Abstract:At present, earthquakes cannot be predicted. Scientific decision-making and rescue after an earthquake are the main means of mitigating the immediate consequences of earthquake disasters. If emergency response level and earthquake-related fatalities can be estimated rapidly and quantitatively, this estimation will provide timely, scientific guidance to government organizations and relevant institutions to make decisions on earthquake relief and resource allocation, thereby reducing potential losses. To achieve this goal, a rapid earthquake fatality estimation method for Mainland China is proposed herein, based on a combination of physical simulations and empirical statistics. The numerical approach was based on the three-dimensional (3-D) curved grid finite difference method (CG-FDM), implemented for graphics processing unit (GPU) architecture, to rapidly simulate the entire physical propagation of the seismic wavefield from the source to the surface for a large-scale natural earthquake over a 3-D undulating terrain. Simulated seismic intensity data were used as an input for the fatality estimation model to estimate the fatality and emergency response level. The estimation model was developed by regression analysis of the data on human loss, intensity distribution, and population exposure from the Mainland China Composite Damaging Earthquake Catalog (MCCDE-CAT). We used the 2021 Ms 6.4 Yangbi earthquake as a study case to provide estimated results within 1 h after the earthquake. The number of fatalities estimated by the model was in the range of 0-10 (five expected fatalities). Therefore, Level IV earthquake emergency response plan should have been activated (the government actually overestimated the damage and activated a Level II emergency response plan). The local government finally reported three deaths during this earthquake, which is consistent with the model predictions. We also conducted a case study on a 2013 Ms7.0 earthquake in the discussion, which further proved the effectiveness of the method. The proposed method will play an important role in post-earthquake emergency response and disaster assessment in Mainland China. It can assist decision-makers to undertake scientifically-based actions to mitigate the consequences of earthquakes and could be used as a reference approach for any country or region.
Extreme value distribution and dynamic reliability estimation of high-pier bridges subjected to near-fault impulsive ground motions

Zhi-Qiang Chen,Shi-Xiong Zheng,Qiang Zhou,Zhi-Wei Chen,Xi Li

DOI: https://doi.org/10.1177/1369433219894245

2020-01-01

Advances in Structural Engineering

Abstract:The seismic behaviour of high-pier and long-span bridges in fault zones is significantly influenced by the near-fault impulsive effect. In view of this, this study evaluates the extreme value distribution and dynamic reliability of high-pier bridges built in fault zones. First, based on the improved maximum entropy method constrained with fractional moments, a new method is proposed to evaluate the extreme value distribution of nonlinear structure seismic response. In the proposed method, the fractional moments are evaluated by the Latin hypercube sampling, and a linear system of equations that determine the initial value of fractional exponents and Lagrange multipliers is illustrated to improve the stability of the simplex algorithm. Second, based on the obtained extreme value distribution, the seismic reliability of structure is estimated by the simple numerical integration. Two numerical examples, including a nonlinear single-degree-of-freedom system and a three-storey nonlinear shear frame, are adopted to validate the proposed method. Finally, the seismic reliability of a typical high-pier and long-span continuous rigid frame bridge located in southwest of China is evaluated by the proposed method and some critical conclusions are drawn. The results obtained from this study not only indicate the accuracy and efficiency of the proposed method but also can provide some direct guidelines for the seismic design of the high-pier and long-span bridges in fault zones.
Dynamical evaluation of dam safety

Wu Zhongru,Wen Zhiping,Su Huaizhi

DOI: https://doi.org/10.1201/9780203020678.ch99

2004-01-01

Abstract:Dam runs under the abominable condition with the influence of many factors. The correlation between factors is very intricate and often alterable. So dam safety was conventionally assessed by the experiential knowledge of experts. The qualitative analysis can only be implemented. A method was proposed to evaluate dynamically dam safety. Firstly, the multi-index system of safety evaluation was built. It was a hierarchical structure. Secondly, a model was proposed to assess comprehensively dam safety with extension theory. The weights of index can be obtained by calculating the relational degree between evaluation index and grades. The numerical example shows that the proposed method is feasible and effective, and the evaluation results are reasonable. The health status can be described in qualitative and quantitative manner. By analyzing the development trend with time, dam behavior can be predicted. This method can also be used to assess slope stability, rock quality and dam aging. © 2004 Taylor & Francis Group, London,.
Post-event evaluation of residual capacity of building structures based on seismic monitoring

Luji Wang,Jiazeng Shan

DOI: https://doi.org/10.1007/s13349-024-00803-y

2024-04-29

Journal of Civil Structural Health Monitoring

Abstract:Structural capacity evaluation is essential to support the safety assessment and decision-making process of existing building structures after disastrous earthquakes. Current post-earthquake evaluation practices rely more on manual on-site inspections, which are labor-intensive and subjective. A simulation-based capacity evaluation could be a desired alternative when numerical models for these buildings are prior-identified and updated using structural health monitoring data. This study proposes a procedure for identifying the capacity curve and assessing the residual capacity of existing structures using seismic monitoring data. The mass-normalized spectral acceleration-displacement (AD format) relation is first defined in a single-degree-of-freedom system. Considering the post-event deterioration of structural capacity, a data-driven reduction factor for the capacity curve is introduced to quantify the potential structural degradation. With the aid of the updated capacity curve, the residual capacity of the earthquake-damaged structure is then predicted via incremental dynamic analysis. The feasibility and accuracy of the proposed method are analyzed via numerical simulations and further validated using a large-scale shaking table test and a real-world instrumented building. Results show that the proposed method could identify the capacity curve of the existing structure from seismic monitoring data and estimate the hysteresis responses with a favorable agreement. It could provide the residual capacity of the target structure and quantify its capacity reduction, which can informatively facilitate the post-earthquake structural safety management.

engineering, civil
RESIDUAL DYNAMIC RESISTANCE ASSESSMENT OF SEISMIC DAMAGED UNDERGROUND ARCH UNDER NON-UNIFORM EXPLOSION LOADING

周健南,范华林,金丰年,浦奎英

DOI: https://doi.org/10.6052/j.issn.1000-4750.2011.11.S025

2012-01-01

Abstract:For the sake of the ability assesment of anti non-uniform dynamic loading of the damaged structure after earthquake, simplified structural models for damaged arches, including two-hinged and three-hinged arches, were built according to the damage modes and distributions. Residual dynamic resistances of seismic damaged underground arches were calculated by an equivalent static load method. Through an example, moments of arches with different constraints were calculated under non-uniform explosion loading, as well as the thrust force at the foot of the arches. Then the ability of anti-dynamic loads of the damaged structure after eartheuake was evaluated. It is concluded that under non-uniform explosion loading the load capapcity of the damaged arch drops at a level of 13 percent or even 50 percent when controled by bending or shear resistance, respectively.
Numerical and Field Investigations of Dynamic Failure Caused by Mining-Induced Tremor Based on Focal Mechanism

Zhi-Long He,Yan-Bo Zhang,Cai-Ping Lu,Qi Wang,Xu-Long Yao,Jie-Fang Song,You-Bang Lai

DOI: https://doi.org/10.1007/s00603-024-03991-7

IF: 6.518

2024-06-16

Rock Mechanics and Rock Engineering

Abstract:The rupture mechanism of a seismic source governs the spatiotemporal distribution and intensity characteristics of the radiated stress-wave field and significantly affects the dynamic disasters of roadways triggered by seismic disturbances. In this study, we propose a method to simulate seismic sources with arbitrary rupture mechanisms based on moment-tensor theory. Subsequently, using the dynamic instability of tailentry at the 63 upper 06 working face Dongtan Coal Mine induced by an "8.30" strong mining-induced tremor as the engineering context, we calibrate the characteristics of the seismic source via moment-tensor inversion. The entire process from the excitation of the strong seismic source, the propagation of stress waves, and the eventual triggering of roadway failure and instability is simulated. Concurrently, variables representing P- and S- waves are formulated based on the relationship between the vibration and propagation directions, and the roles of both waves in the dynamic instability of the tailentry are investigated. The results indicate that (1) during the mining at the 63 upper 06 working face, concentrated stress is transferred to the strong seismic-source area and the advanced area of the coal wall at the tailentry, thus providing static load conditions for the occurrence of strong seismic events and the dynamic instability of the tailentry. (2) P- waves primarily exert tensile and compressive stresses along the propagation direction in the medium, thereby resulting in localized stress variations, whereas S- waves induce shear effects between adjacent wave paths because of their opposing velocity directions. (3) The "8.30" strong mining-induced tremor is characterized by tensile failure, with P- waves exhibiting the greatest intensity in the horizontal and vertical directions, and S- waves exhibiting the highest intensity at an angle of 45 ° from the seismic source, thus contributing significantly to the damage and instability of the roadway owing to the relative spatial position between the roadway and seismic source. (4) The 100 m range ahead of the coal wall at the tailentry experiences significantly greater static and dynamic disturbances compared with other areas, thus resulting in the most severe damage.

geosciences, multidisciplinary,engineering, geological
Experimental Study on the Safety Assessment of Reinforced Concrete Shear Wall Structure with the Correspondence between Damage Image and Index

Suxia Kou,Jianmin Zhang,Jing Ren

DOI: https://doi.org/10.1155/2021/5514123

IF: 1.843

2021-05-31

Advances in Civil Engineering

Abstract:The post-disaster emergency rescue and loss evaluation hinges on the timeliness and accuracy of safety assessment of building structures in quake-hit regions. At present, the damage identification of quake-hit buildings in China is mainly conducted based on the experience of the experts. Such an assessment method will inevitably lead to the differences in identification results because each expert has his/her own subjective understanding of the degree of structural damage. In order to solve this problem, the low cyclic loading test of 7 specimens of shear wall is conducted and the hysteretic curves of seven shear walls are drawn. The failure modes and seismic performance of members under different design parameters (axial compression ratio of shear wall, shear span ratio, form of edge member, reinforcement ratio, stirrup ratio of coupling beam, and span height ratio) are compared. By recording the damage images taken at the controlled displacement under each level of load, the corresponding damage indexes are calculated, and the correspondence between the typical component damages and the damage indexes is discovered. After that, the images are compiled into an atlas. The authors calculate the damage index of the overall structure based on the damage indexes of the components and carries out damage identification of RC shear wall structure with the said damage index.

construction & building technology,engineering, civil
Seismic fragility assessment of the Daikai subway station in layered soil

Zilan Zhong,Yiyao Shen,Mi Zhao,Liyun Li,Xiuli Du,Hong Hao

DOI: https://doi.org/10.1016/j.soildyn.2020.106044

IF: 4

2020-05-01

Soil Dynamics and Earthquake Engineering

Abstract:A numerical method based on nonlinear incremental dynamic analysis is proposed in this paper to develop seismic fragility curves for rectangular subway station buried in layered soil and subjected to transverse seismic excitations. The proposed method primarily consists of four parts, namely, model verification, damage quantification, ground motion processing, and seismic performance assessment. The main section of the Daikai subway station collapsed during the Kobe Earthquake is used as an example to demonstrate the detailed procedure of the proposed method in construction of seismic fragility curves for underground structures. Results from the nonlinear soil-structure interaction model in this paper is firstly verified against the results from existing literature. The threshold values of different damage states of the underground structure are quantified by interstory drift ratio obtained from the nonlinear static pushover analysis of the soil-structure interaction system. Based on the results of the incremental dynamic analysis, it is found that the peak acceleration at the ground surface is an efficient and appropriate intensity measure of the ground motions for shallowly buried underground structure. The proposed method is validated by comparing with the existing empirical and numerical seismic fragility curves of buried rectangular underground structures and can be used as an effective approach in the development of seismic fragility database for underground structures.

geosciences, multidisciplinary,engineering, geological
Real-time Quantitative Risk Assessment of Casualty for High-Rise Building Fires

韩朱旸,翁文国,黄全义

DOI: https://doi.org/10.16511/j.cnki.qhdxxb.2012.12.005

2012-01-01

Abstract:There are now many high-rise buildings and fires in such building severely threaten urban safety.A real-time quantitative risk assessment method using casualty was developed based on the building structure and fire characteristics to assess and manage risks for high-rise buildings.This method includes acquisition of real-time data,spatial analysis of the data,calculation of the casualty risk and an integrated casualty assessment.Risks in a real building were analyzed to demonstrate this method.The results show that the building risk distribution can be quantitatively predicted by the casualty of high temperature gases and toxic carbon monoxide.The results show the situation and the spread of the fire,so this method can be used in practical applications and for the development of rescue and evacuation procedures.
Probability-based analytical model for predicting the post-earthquake residual deformation of SDOF systems

Zhang Qin,Gong Susu,Gong Jinxin,Zhang Guanhua,Xi Guangheng

DOI: https://doi.org/10.1007/s11803-022-2089-0

IF: 2.8

2022-02-04

Earthquake Engineering and Engineering Vibration

Abstract:A probability-based analytical model for predicting the seismic residual deformation of bilinear single-degree-of-freedom (SDOF) systems with a kinematic/Takeda hysteretic model is proposed based on a statistical analysis of the nonlinear time history response, and the proposed model explicitly incorporates the influence of record-to-record variability. In addition, the influence of primary parameters such as the natural vibration period, relative yield force coefficient, stiffness ratio and peak ground acceleration (PGA) on the seismic residual/maximum deformation ratio (dR/dm) are investigated. The results show that significant dispersion of the dR/dm ratio is observed for SDOF systems under different seismic ground motion records, and the dispersion degree is influenced by the model parameters and record-to-record variability. The statistical distribution of the dR/dm results of SDOF systems can be described by a lognormal distribution. Finally, a case study for seismic residual deformation and reparability assessment of the bridge structure designed with a single pier is carried out to illustrate the detailed analytical procedure of the probability-based analytical model proposed in this study.

engineering, civil, geological
The Comprehensive Assessment Method of Concrete Damage after Disastrous Fire Based on Game Theory-Normal Cloud Model

Zhongwei Gao,Donghui Ma,Xiaodong Guo,Wei Wang,Zhitao Wang

DOI: https://doi.org/10.1155/2019/5159497

IF: 1.43

2019-02-07

Mathematical Problems in Engineering

Abstract:Rapidly and correctly assessing the extent of the damage to a concrete structure after a disastrous fire has great engineering significance. In this paper, an assessment method is proposed based on the game theory-normal cloud model. The surface colors of concrete, exfoliation, cracks, and hammering responses are chosen as the comprehensive assessment indices of concrete damage after fire to establish the corresponding assessment criteria. The normal cloud generator is used to calculate the certainty degree of the grading assessment index of concrete damage after fire. By adopting game theory, the objective weight obtained by the information entropy method and the subjective weight obtained by precedence chart are combined into a comprehensive weight. The comprehensive certainty degree value of concrete damage after fire is then calculated by certainty and weight matrices. The project case analysis shows the assessment results are both intuitive and realistic. This method provides a new approach to the assessment of concrete damage after fire which is more efficient and easier to apply than existing methods.

engineering, multidisciplinary,mathematics, interdisciplinary applications
An Integrated Method Combining Remote Sensing Data and Local Knowledge for the Large-Scale Estimation of Seismic Loss Risks to Buildings in the Context of Rapid Socioeconomic Growth: A Case Study in Tangshan, China

Guiwu Su,Wenhua Qi,Suling Zhang,Timothy Sim,Xinsheng Liu,Rui Sun,Lei Sun,Yifan Jin

DOI: https://doi.org/10.3390/rs70302543

IF: 5

2015-03-04

Remote Sensing

Abstract:Rapid socioeconomic development in earthquake-prone areas can cause rapid changes in seismic loss risks. These changes make it difficult to ensure that risk reduction strategies are realistic, practical and effective over time. To overcome this difficulty, ongoing changes in risk should be captured timely, definitively, and accurately and then specific and well-timed adjustments of the relevant strategies should be made. However, methods for rapidly characterizing such seismic disaster risks over a large area have not been sufficiently developed. By focusing on building loss risks, this paper presents the development of an integrated method that combines remote sensing data and local knowledge to resolve this problem. This method includes two key interdependent steps. (1) To extract the heights and footprint areas of a large number of buildings accurately and quickly from single high-resolution optical remote sensing images; (2) To estimate the floor areas, identify structural types, develop damage probability matrixes, and determine economic parameters for calculating monetary losses due to seismic damage to the buildings by reviewing building-relevant local knowledge based on these two parameters (i.e., the building heights and footprint areas). This method is demonstrated in the Tangshan area of China. Based on the integrated method, the total floor area of the residential and public office buildings in central Tangshan in 2009 was 3.99% lower than the corresponding area number obtained by a conventional earthquake loss estimation project. Our field-based verification indicated that the mean relative error of the method for estimating the floor areas of the assessed buildings was 2.99%. A simulation of the impacts of the 1976 Ms 7.8 Tangshan earthquake using this method indicated that the total damaged floor area of the residential and public office buildings and the associated direct monetary loses in the study area could have been 8.00 and 28.73 times greater, respectively, than in 1976 if this earthquake had recurred in 2009, which is a strong warning to the local people regarding the increasing challenges they may face.

environmental sciences,imaging science & photographic technology,remote sensing,geosciences, multidisciplinary

Dynamic method of assessing seismic casualties

Numerical simulation and assessment of Tangshan seismic casualties

THE INDEX AND STATE-FUNCTION OF CASUALTIES IN EARTHQUAKE

Study On The Earthquake Casualty Estimation Based On Monte-Carlo Simulation Method

Probabilistic Assessment of Seismic Stability of a Rock Slope by Combining the Simulation of Stochastic Ground Motion with Permanent Displacement Analysis

Analysis of dynamic reliability of offshore jacket platforms subjected to seismic action

A Modified Newmark Method for Calculating Permanent Displacement of Seismic Slope Considering Dynamic Critical Acceleration

A Numerical Method of Lower Bound Dynamic Shakedown Analysis for 3D Structures

Research on Dynamic Assessment Method of Earthquake Scene Rescue Performance Based on AHP and Cloud Model

Rapid Estimation of Earthquake Fatalities in Mainland China Based on Physical Simulation and Empirical Statistics-A Case Study of the 2021 Yangbi Earthquake

Extreme value distribution and dynamic reliability estimation of high-pier bridges subjected to near-fault impulsive ground motions

Dynamical evaluation of dam safety

Post-event evaluation of residual capacity of building structures based on seismic monitoring

RESIDUAL DYNAMIC RESISTANCE ASSESSMENT OF SEISMIC DAMAGED UNDERGROUND ARCH UNDER NON-UNIFORM EXPLOSION LOADING

Numerical and Field Investigations of Dynamic Failure Caused by Mining-Induced Tremor Based on Focal Mechanism

Experimental Study on the Safety Assessment of Reinforced Concrete Shear Wall Structure with the Correspondence between Damage Image and Index

Seismic fragility assessment of the Daikai subway station in layered soil

Real-time Quantitative Risk Assessment of Casualty for High-Rise Building Fires

Probability-based analytical model for predicting the post-earthquake residual deformation of SDOF systems

The Comprehensive Assessment Method of Concrete Damage after Disastrous Fire Based on Game Theory-Normal Cloud Model

An Integrated Method Combining Remote Sensing Data and Local Knowledge for the Large-Scale Estimation of Seismic Loss Risks to Buildings in the Context of Rapid Socioeconomic Growth: A Case Study in Tangshan, China