Study on the mathematical model for predicting settling of water-in-oil emulsion
Yi-Bo Li,Tian-Shuang He,Zhi-Ming Hu,Ya-Qian Zhang,Qiang Luo,Wan-Fen Pu,Jin-Zhou Zhao
DOI: https://doi.org/10.1016/j.petrol.2021.109070
IF: 5.168
2021-11-01
Journal of Petroleum Science and Engineering
Abstract:Owing to the increment efficiency, the generation of water-in-oil (W/O) type emulsion in the flooding process affects the displacement efficiency. After the generation of emulsion in reservoir conditions, multiple mechanisms such as creaming, sedimentation, flocculation, phase inversion, coalescence, and Ostwald ripening cause the break of emulsion; and thus, the viscosity of the emulsion phase changes. However, owing to the lack of an appropriate model, the viscosity fluctuation caused by the emulsifying and demulsifying processes of the displaced phase has not been considered in general numerical simulations. In this study, a mathematical model that included the water cut, viscosity prediction, droplet displacement models, and droplet breakdown probability was established to predict the settling process of W/O type emulsion at different conditions. Multiple influencing factors, such as oil/water ratio, rotation speed, stirring time, and surfactant concentration were considered. The mathematical model for predicting emulsion settling provides excellent fitting results on the emulsion W/O system. The introduction of droplet breakdown probability can be used to adjust the prediction model to different emulsion systems. The size of the droplet is the key factor in the settling of the emulsion system. A larger droplet increases the coalescence probability, viscosity, droplet size, and descent rate. The oil/water ratio, stirring time, and rotation speed have a significant influence on the size of the emulsion droplet. More external and low water content can help generate smaller size droplets, which improves the emulsion stability. The emulsion with a different surfactant concentration possesses a similar initial condition. However, a low surfactant concentration system achieves a weaker stability during the settling process because of the relatively large droplet size and high descent rate.
energy & fuels,engineering, petroleum