Abstract:In this paper, by constructing a 3-DOF (Degrees of freedom) laser interferometer on each displacement axis of motion, the main errors during the coordinate measuring machines (CMM) motion are dynamically monitored. The 3-DOF laser interferometer is composed of three-beam dual-frequency laser interferometers, and each dual-frequency laser interferometer obtains the reflection signal through a corner cube reflector. By determining the position parameters of the three corner cube reflectors and three sets of feedback signals, the 3-DOF laser interferometer can calculate the three parameters, i.e., the axial displacement and the lateral pitch and yaw angles. The device is installed on each motion axis of the CMM to monitor 9 major errors during the whole motion system. Laser signals are used to track position information by establishing the rigid body transformation relationship. Therefore, the 9 errors can be updated in real time through the monitoring system to replace the calibration results to calculate the probe position. The position error of the CMM probe caused by the dynamic error is simulated. Monte Carlo method is employed to obtain the error situation and monitor the residual error distribution throughout the measurement movement process. The errors can be corrected immediately without recalibrating the CMM error parameters especially when the dynamic error changes significantly. In addition, environmental errors are also introduced in the model to analyze the impact on the accuracy of position monitoring. The method proposed can reduce the position monitoring error within 0.1 mu m. Using this method, the error source of a dynamic error monitoring system can be designed in a simulated environment, which can be used as the basis for the design of the dynamic error monitoring system.

A Measuring Model Study of a New Coordinate-Measuring Machine Based on the Parallel Kinematic Mechanism

A United Kinematic Calibration Method for a Dual-Machine System

An Improved Kinematic Model for Serial Robot Calibration Based on Local POE Formula Using Position Measurement

Machine Tool Calibration: Measurement, Modeling, and Compensation of Machine Tool Errors

Error-simulation System Modeling and Error Analyzing of an Articulated Arm Coordinate Measuring Machine

Kinematic Modeling and Base Frame Calibration of a Dual-Machine-based Drilling and Riveting System for Aircraft Panel Assembly

A New Kinematic Model of Portable Articulated Coordinate Measuring Machine

Kinematic Calibration Of The 3-Dof Parallel Module Of A 5-Axis Hybrid Milling Machine

Kinematic Calibration of Gantry Hybrid Machine Tool Based on Estimation Error and Local Measurement Information

Modeling And Simulation Of Dynamic Errors In A Coordinate Measuring Machine With 3-Dof Laser Interferometer

Full-scale Measurement of CNC Machine Tools

Kinematic Calibration Of Parallel Robots Using Pose Measurement Obtained With Coordinate Measuring Machine

Kinematical calibration of a hybrid machine tool with Regularization method

Study of coordinate measuring machines synthetic dynamic error under different positions and speeds based dual linear returns

Geometric Analysis of Measurement Errors in a Surface Metrology Class with Closed-Loop Probes

Equivalent Error Based Modelling for Prediction and Analysis of Measuring Accuracy in 3-Axis FXYZ Coordinate Measuring Machines from Position, Repeatability and Reversibility Errors

Measurement Trajectory Evaluation and Error Compensation for Kinematic Calibration of a 5-Axis Hybrid Machine Tool

Study Of Error Modeling In Kinematic Calibration Of Parallel Manipulators

Identification of Kinematic Errors of Five-Axis Machine Tool Trunnion Axis from Finished Test Piece

Dynamic error modeling and analysis of articulated arm coordinate measuring machine with integrated joint module

The Measurement Of Kinematic Accuracy For Various Configurations Of Parallel Manipulators