Abstract:The development of high performance metal matrix composites (MMCs) requires understanding the complex effects of heterogeneous microstructure on the mechanical properties and failure mechanisms. Experimental observations [1] indicated that fine reinforcement particles increased the composite strengthen and work hardening capacity. A number of dislocation models [1,2] have been proposed in a few decades to predict the particle size dependence. Recently, Gao et al. [3] proposed a mechanism-based theory of strain gradient plasticity (MSG) to illustrate the plastic strain and strain gradient which is dissimilar to the phenomenological strain gradient plasticity theories [4,5]. Gao and Huang [6] developed a Taylor-based nonlocal theory (TNT) of plasticity to account for the size dependence of plastic deformation on the strengthening of particle reinforced composites. Qu et al. [7] have extended the conventional theory of mechanism-based strain gradient plasticity (CMSG) established from the Taylor dislocation model to explain the effect of quench hardening and account for particle/matrix interface debonding via the cohesive zone model (CZM). The numerical results agree well with Lloyd’s experimental data [1]. Nan and Clarke [8] extended the effective medium approach (EMA) to demonstrate the influence of particle size and size distribution as well as particle fracturing on the deformation behavior of MMCs. Tohgo et al. [9] extended the incremental damage model of the MMCs by introducing the particle size effects using Nan–Clarke’s simple method. This paper presents the development of a 2D microstructure based finite element model to investigate the effect of particle size on the deformation behavior of the SiCp/Al composites. In the simulation, the two-dimensional randomly distributed multiparticles unit cell model is used. For modeling the matrix behavior of the composites, the Taylor-based nonlocal theory of plasticity is used. The model is enhanced by including contribution of interfacial decohesion and particle fracture damage mechanisms. The simulation provides the stress–strain field of composites during tensile deformation, and calculates the stress–strain curves of the composites with different particle size. 2. NUMERICAL METHODS

The microstructural damage during deformation of SiCp reinforced Al-2618 metal matrix composite

MMCs with Controlled Non-Uniform Distribution of Submicrometre Al2O3particles in 6061 Aluminium Alloy Matrix

Forming process of hot-extruded SiCw/6061AI composites(I)

Deformation and fracture of SiCp/Al composites under complex loading conditions: A simulation study

Microstructure-Based Modeling of the Dynamic Behaviors of SiCp/7075Al Composites

Hot Deformation Behavior and Mechanisms of SiC Particle Reinforced Al-Zn-Mg-Cu Alloy Matrix Composites

Microstructure evolution and dynamic recrystallization nucleation mechanism of medium volume fraction SiCp/Al composite during hot deformation

Fracture Behaviour of SiCp/Al Composites with Network Architecture

Influence of Reinforcement with Multimodal Distribution on Thermophysical Properties and Fracture Behavior in Al-Si/SiC Composites Infiltrated under Super-Gravity Field

Hot Workability of the Multi-Size SiC Particle-Reinforced 6013 Aluminum Matrix Composites

Micromechanical modeling of loading rate–dependent tensile damage and fracture behavior in fiber-reinforced ceramic-matrix composites

An enhanced fem model on the deformation behavior of sic / aluminum composites

Damage behavior and mechanism of SiCp/Al composites under biaxial tension

Numerical Simulation of the Mechanical Properties and Fracture of SiCp/6061Al Composite Materials Based on Microstructure

Hot Tensile Deformation Mechanism and Fracture Behavior of the ZW31/PMMC Laminate

Rate dependence of damage formation in metallic-intermetallic Mg-Al-Ca composites

Mechanical Properties of A359/SiCp Metal Matrix Composites at Wide Range of Strain Rates

Plastic deformation and fracture behaviors in particle-reinforced aluminum composites: A numerical approach using an enhanced finite element model

Hot deformation behavior and processing maps of hybrid SiC and CNTs reinforced AZ61 alloy composite

Bending Properties and Failure Mechanism of Continuous W-Core-SiC Fiber-Reinforced 2024 and 6061 Aluminum Matrix Composites

Compressive response and microstructural evolution of in-situ TiB2 particle-reinforced 7075 aluminum matrix composite