Abstract:Supersonic flows exhibit compressible effects and ignoring this influence would lead deviations in supersonic combustion simulation. In this study, taking the standard k -e turbulence model as an example, both the expansion and structural compressibility corrections were conducted under the open-source numerical simulation platform OpenFOAM. These corrections are employed to suppress excessive turbulence kinetic energy growth in supersonic flow. The modified turbulence model was validated against complicated flow problems such as supersonic cavity flow, strut injection combustion, and supersonic boundary layer combustion. The results demonstrated that the modified k - e turbulence model could accurately capture the compressible variations of the flow field for the four classical cases. Compared to the standard k -e turbulence model, the computational accuracy through the modified model was improved and could effectively simulate the development of the supersonic combustion. For the supersonic cavity flow, using this modified model could accurately predict flow separation. In the simulation of DLR scramjet engine, using the modified turbulence model could suppress downstream supersonic combustion processes and the predictions was in good agreement with experimental data. For the simulation results of boundary layer combustion, this modified turbulence model could accurately capture the development boundary layer combustion and its ignition position. Therefore, it could be concluded that the established solver named Ck-EpsilonFOAM in this study was capable of effectively predicting the development of supersonic combustion flows within confined spaces and near-wall flow separation phenomena for scramjet engine. So it can be applied to numerical simulations of supersonic turbulent combustion.

NUMERICAL COMPUTATION ON TURBULENT REACTING FLOW IN AEROENGINE AFTERBURNER

Computation of turbulent flow in a afterburner without reaction under generalized nonorthogonal curvilinear coordinate systems

Numerical Simulation of Two-phase Turbulent Combusti on Flow in an Afterburner Under Generalized Nonorthogonal Curvilinear Coordinate Systems

Numerical Simulation of Turbulent Combustion in a 3D Afterburner

Computation of Rarefied Hypersonic Flows Using Modified Form of Conventional Burnett Equations

Numerical Simulation of Turbulent Two-Phase Combustion in a Turbojet Afterburner

Flow Field Calculations for Afterburner

Numerical Simulation of Three-Dimensional Combustion Flow in a Gas Turbine Annular Combustor

Numerical Simulation for Combustion of Droplet with Volume of Fluid Formulation

Multilevel Adaptive Methods for Turbulent Combustion with Detailed Chemistry: Part I

THE NUMERCAL SIMULATION OF REACTING VISCOUS FLOW IN 2D ROCKET MOTOR COMBUSTOR

Numerical Simulation of Reacting Flow in the Combustion Chamber and Study of the Impact of Turbulent Diffusion Coefficients

RANS Simulation of Turbulent Non-Premixed H2/Air Combustion in a Scramjet

Numerical Investigation on the Instability of Premixed Combustion in Combustors of Gas Turbines

Large Eddy Simulation of Turbulent Premixed Combustion Using Tabulated Detailed Chemistry and Presumed Probability Density Function

Simulation of Vortex Shedding Behind a Bluff Body Flame Stabilizer Using a Hybrid U-RANS/PDF Method

Numerical Simulation of Flow in the Vaporizing Burner

Numerical investigation of combustion field of hypervelocity scramjet engine

Numerical Simulation of Scramjet Engine with Compressibility Corrections on K-Εmodel Based on OpenFOAM

Numerical Simulation Research on Three Dimensional Turbulence Flow in a Gas Turbine Combustor Burning Low Heat Value Syngas

Numerical Simulations and Optimization of a Micro Annular Combustor