Abstract:Existing poromechanical models fall short in wellbore stability analysis without considering combined effects of hydro-mechanical coupling, thermal diffusion, and transient nature of a filter cake buildup, especially for high-pressure high-temperature deep formations. To fill this gap, we consider these processes with their time effects and derive the coupled porothermoelastic analytical solutions of the time-dependent stress and pore pressure for the general geometry of an inclined wellbore. Terzaghi's effective stresses are then combined with Drucker–Prager's shear failure criterion and the rock's tensile strength to calculate the corresponding collapse and fracturing mud weights. An example of an extended reach horizontal wellbore is presented to demonstrate the effects of a non-uniform filter cake buildup on the stresses in wellbore stability analysis while drilling. The example shows that hydro-mechanical coupling without filter cake plays an essential role in shrinking the mud-weight window with time. Wellbore cooling decreases the effective stresses as well as the collapse and fracturing mud weights. The buildup of a filter cake increases the effective tangential and radial stresses and tends to widen the mud-weight window with time. Also, a field case study is presented to show the applicability of the solution in calculating the abnormalities of excess breakdown pressure during well completion well stimulation. We apply the newly derived analytical solution to the field case and calculate breakdown pressures. Our results agree well with the values reported from the field case. Sensitivity analysis shows that the breakdown pressure decreases linearly with the decrease in wellbore temperature and the increase in rock's volumetric thermal expansion coefficient. Breakdown pressure can be reduced by 8.7% by cooling the wellbore up to and increased by 22% with a 3-mm filter cake and almost 49% when the filter cake has extremely low permeability.

Study on the factors influencing the strength of drilling fluid filter cake

The Role of Drilled Formation in Filter Cake Properties Utilizing Different Weighting Materials

Effects of water-based drilling fluid on properties of mud cake and wellbore stability

Mud Cake Improver Mul-GX with Lubrication and Interface Enhancement Effect and Its Action Mechanism

Fine-Tuning Filter Cake Sealing Performance: The Role of Particle Size in Hematite Weighted Water-Based Drilling Fluid

Experimental study of hydrophilic additives on filter cake permeability and filtrate losses

Evaluation of filtration characteristics of bentonite-free water-based mud utilizing carboxymethylated tapioca starch

Evaluation Method of Shale Water-Based Drilling Fluid Plugging Based on «Thick Mud Cake» Simulation

Numerical simulation study on impact factors to dynamic filtration loss

Improving the filtration properties for manganese tetroxide mud utilizing perlite particles to drill wide-range permeability sandstone formation

Simulation of Filter-Cake Formations on Vertical and Inclined Wells Under Elevated Temperature and Pressure

The impact of particle size distribution of haematite‐based drilling fluid on perlite functionality

Study on Artificial Filter Cake Evaluation Method of Oleophilic Nano-Plugging Agent

Study of a strong inhibitory solid-free drilling fluid

Effect of Low Gravity Solids on Weak Gel Structure and the Performance of Oil-Based Drilling Fluids

Effect of Hematite Dosage on Water-Based Drilling Fluid and Filter Cake Properties

Molecular Simulation of Interactions between High-Molecular-Polymer Flocculation Gel for Oil-Based Drilling Fluid and Clay Minerals

Studies on Characteristics of Mudcake and Soil Between Bored Piles

The Study of The Sealing Performance of Fibrous-Laden Drilling Fluid Over Simulated Lost Zone Under Overbalanced Pressure Conditions

Effect of eccentricity with different shape wellbores on the flushing efficiency of drilling fluid filter cake

The Implication of Time-Dependent Filter Cake Buildup on Wellbore Stability and Breakdown Pressure