Abstract:Sandwich structures and auxetic materials have had a significant impact on various applications as energy absorbers. The purpose of this study is to manipulate the deformation mechanism of sandwich beams by using a combination of rigid and flexible material components in the core structure, thus improving their absorption capacity and flexural behavior. The effects of flexible and rigid material layer arrangements and the percentage of flexible/rigid material in the core structures were investigated by using experimental and numerical methods. Three-point bending tests of fourteen different multi-material auxetic cores and two different single material core structures were carried out using flexible TPU and rigid PLA 3D printed layers. Then, the FE analysis was performed parametrically to reveal the effects of t/l ratios of the unit cell on the flexural behavior and energy absorption performance of the sandwich beams. Experimental studies shows that the TPPP, PTPT, and TTPT hybrid core arrangements exhibit greater energy absorption capacities (9.07 J, 9.61, and 9.60 J, respectively). The deformation mechanism of the flexible and rigid materials and inclined struts of the core structures play a key role in the flexural strength and energy absorption capacities. For example, the plastic deformation mechanism could be spread over a wider area to delay the localized fractures by reinforcing the rigid auxetic core with flexible material. Also, the strength and energy absorption could be increased when the bottom layer is made of rigid material. It is recommended to avoid using adjacent layers of the flexible material because they have lower flexural strength. The parametric analysis show that the energy absorption performance could be increased within the range of ~ 5 to ~ 20% when the t/l ratio decreases.

Analysis of an adaptive sandwich beam with a 1-5 type piezoelectric core

Analytical modeling of sandwich beam for piezoelectric bender elements

ANALYSIS OF NON-LINEAR PIEZOTHERMOELASTIC LAMINATED BEAMS WITH ELECTRIC AND TEMPERATURE EFFECTS

On Three-Dimensional Layered Piezoelectric Shell Elements for Design Simulation of Adaptive Structures

Large deformations of piezoelectric laminated beams based on the absolute nodal coordinate formulation

Analysis of Asymmetric Piezoelectric Composite Beam

Dynamics and Control of Adaptive Nonlinear Piezothermoelastic Structures with Coupled Electric, Thermal and Mechanical Fields: A Finite Element Approach

CONTROL OF ADAPTIVE SHELLS WITH THERMAL AND MECHANICAL EXCITATIONS

Piezothermoelastic Characteristics and Control of Active Piezoelectric Structures

Electro-mechanical analysis of piezoelectric sandwich structure

A Finite Element Model for the Vibration Analysis of Sandwich Beam with Frequency-Dependent Viscoelastic Material Core

Modeling of Sensor Function for Piezoelectric Bender Elements

Analytical Modeling and Static Response of a Curved Beam with Imperfectly Bonded Piezoelectric Actuators

Bending response and energy absorption of sandwich beams with combined reinforced auxetic honeycomb core

Accurate thermomechanical analysis of sandwich beams with nonhomogeneous core by quadrature element method

Analysis of deformation and failure mechanism of sandwich beams with lattice core under three-point bending load

Nonlinear electromechanical bending of bi-modular piezoelectric laminated beams

Theoretical and Experimental Study of the Vibration Dynamics of a 3D-Printed Sandwich Beam With an Hourglass Lattice Truss Core

On functionally graded beams with integrated surface piezoelectric layers

Bending Analysis of A Piezoelectric Semiconductor Composite Beam with Flexoelectricity

Enhancing energy absorption of the sandwich beams with a synergetic strategy of flexible/rigid materials in re-entrant auxetic cores under flexural loading