Abstract:Americium and curium, present in spent nuclear fuel, are carried forward to the high-level wastes (HLW) upon its reprocessing within the closed nuclear fuel cycle strategy. These minor actinides are required to be extracted efficiently to mitigate the long-term radiotoxicity of the HLW, which in some countries is the proposed strategy for the safe management of radioactive wastes emanating from the reprocessing of spent nuclear fuel. While both Am and Cm are co-extracted by most of extractants used for actinide partitioning and lanthanide-actinide separations, their mutual separation makes Am transmutation less complicated. In their most stable (trivalent) oxidation state, these elements are very difficult to separate. In this review, solvent extraction systems for the mutual separation of Am(III) and Cm(III) from nitric acid solutions are discussed. The extraction systems for the separation of americium directly from high-level liquid waste and from isolated mixtures of americium and curium are considered. Abbreviations: D:distribution ratio, <math> D = C o r g C a q </math>, where Corg – total concentration of a metal in the organic phase, Caq – total concentration of a metal in the aqueous phase; DF: decontamination factor, <math> D F = C x , f e e d ⋅ Q f e e d C x , p r o d u c t ⋅ Q p r o d u c t </math>, where Cx,feed, Cx,product – concentrations of an impurity in the initial feed solution and the product solution (raffinate or back-extract), Qfeed, Qproduct – flow rates of the initial feed solution and the product solution; GW×day/tHM: burn-up of nuclear fuel, where tHM – tons of heavy metal; HAC: high active concentrate; HLW: high level waste; HSAB: Hard and Soft Lewis Acids and Bases; Kex: constant of extraction, for the reaction M3+ (aq) + 3NO3 − (aq) +nL(org) = M(NO3)3Ln (org), Kex: [M3+][NO3 −]3[L]n/[M(NO3)3Ln]; PUREX: Plutonium Uranium Reduction EXtraction; GANEX: Grouped ActiNide EXtraction; REE: rare earth element; SF: separation factor, SF = D1/D2, D1>D2; SNF: spent nuclear fuel; TRLIFS: time-resolved laser induced fluorescence spectrometry; β: constant of complex formation; List of ligands: ADAAM(EH): tetra-(2-ethylhexyldiamide-(2-ethylhexyl)-amine; BTPhen: bis-triazinylphenanthroline; (Cl-Ph)2PS2H: bis-(chlorophenyl)-dithiophosphinic acid; CMPO: Carbamoylmethylphosphine oxide DMDOHEMA: N,N'-dimethyl-N,N'-dioctyl-2-(hexyloxy)ethylmalonamide; DOODa: N,N,N',N'-tetraalkyl-3,6-dioxaoctanediamide; H2BP18C6: N,N'-bis[(6-carboxy-2-pyridyl)methyl]-1,10-diaza-18-crown-6; H4TPAEN: N,N,N',N'-tetrakis-[(6-carboxypyridin-2-yl)-ethylenediamine; HDEHP: di-(2-ethylhexyl)phosphoric acid; HEDTA: hydroxyethylethylenediaminetriacetic acid; HEH[EHP]: 2-ethylhexylphosphonic acid; NTAamide: N,N,N,N',N',N'-hexaalkylnitrilotriacetamide; PhPyPO: phenyl-pyridine phosphine oxide; TBP: tri-(n-butyl)phosphate; TEDGA: tetraethyldiglycolamide; TEHP: tri-(2-ethylhexyl) phosphate; TODGA: tetraoctyldiglicolamide; TPH: hydrogenated tetrapropylene List of terms: CHON-principle: An idea that the extractant molecule should consist only of carbon, hydrogen, oxygen and nitrogen atoms, so that the spent ligand can be easily incinerated without the formation of any solid waste. Salting out-agent: An inorganic salt with the same counter-ion as an extracted complex has.Counter-current process: A process in which the solvent and the aqueous feed streams, in contact with each other, flow in opposite directions.

Separation of Am(III) from Fission Product Lanthanides by Bis(2,4,4-Trimethylpentyl)-Dithiophosphinic Acid (HBTMPDTP) Extraction: Process Parameter Calculation

Separation of Americium from Fission Product Lanthanides Using Cyanex 301 Extraction

Separation of No-Carrier-Added Radioactive Hafnium From Rock Samples

A Cross-flow Hot Test for Separating Am from Fission Product Lanthanides by Bis(2,4,4-trimethylpentyl)dithiophosphinic Add Extraction

A New Partitioning Process for High-Level Liquid Waste by Extraction Chromatography Using Silica-Substrate Chelating Agent Impregnated Adsorbents

Extraction of americium and lanthanides by dialkyldithiophosphinic acid and f-f absorption spectra of the extraction complexes

Theoretical Insights into the Separation of Am(Iii) over Eu(Iii) with Phenbhppa

Improving the Robustness of Trivalent Actinides/Lanthanides Separation by Bis(2,4,4-trimethylpentyl)dithiophosphinic Acid: Batch Extraction and Process Demonstration

SEPARATION OF Am FROM MACRO AMOUNT OF LANTHANIDES BY A COUNTERCURRENT MULTISTAGE EXTRACTION WITH PURIFIED CYANEX 301 AND TBP

Application of a Macroporous Silica-Based CMPO-Impregnated Polymeric Composite in Group Partitioning of Long-Lived Minor Actinides from Highly Active Liquid by Extraction Chromatography

Separation of Am from lanthanides by a synergistic mixture of purified Cyanex 301 and TBP

Computation-Aided Development of Next-Generation Extractants for Trivalent Actinide and Lanthanide Separation

Group Partitioning of Minor Actinides and Rare Earths from Highly Active Liquid Waste by Extraction Chromatography Utilizing Two Macroporous Silica-Based Impregnated Polymeric Composites

Separation of Americium from Lanthanides in Nitric Acid Medium by DPTP in Octanol-Dodecane

Studies on the separation treatment of high-level liquid waste by bisamide podand(I): Extraction and separation of An(III) from Ln(III)

Review of the recent developments in the separation of americium form lanthanide

EXTRACTION OF Am(III) AND Ln(III) BY DIALKYLDITHIOPHOSPHINIC ACID WITH DIFFERENT ALKYL GROUPS

Theoretical Study of Am(III) and Eu(III) Separation by a Bipyridyl Phosphate Ligand

Solvent extraction systems for mutual separation of Am(III) and Cm(III) from nitric acid solutions. A review of recent state-of-the-art

The Extraction of Tc(VII), Fe(III), Ru(II), Pd(II) and Mo(VI) from Nitric Acid Solution by Bis(2,4,4-trimethylpentyl)dithiophosphinic Acid (HBTMPDTP)

Enhanced Separation of Americium and Curium in Cyanex301 System by Using Formic Acid and Glycolic Acid as Stripping Chelates