Abstract:Wastewater treatment produces a large amount of sludge, where the minimizing of the disposed sludge is essential for environmental protection. The co-combustion of sludge with coal is a preferable method for sewage sludge disposal from the economic and environmental perspective. The co-combustion of sludge has been widely used in the industry with the advantages of large processing capacity. The melting characteristics of ash are an important criterion for the selection of the co-combustion methods and furnace types. In this study, two types of sludge and four types of coal with different ash melting points were selected, where the ash melting behavior upon co-combustion is investigated by experimental and thermodynamical approaches. Especially, the slag fluidity upon co-combustion is explored via a modified inclined plane method. It has been found that the presence of SiO2 and CaO in sludge substantially enhances its fusion temperature owing to the high content of CaO, while SiO2 acts as a solvent, facilitating the co-melting of other oxides and raising the sludge fusion temperature. Fe2O3 exhibits a specific mass fraction within the range of 10-20%. Furthermore, the presence of CaO and SiO2 prohibits the flow ability of the slag at high temperatures, and Fe2O3 promotes the flow ability for sludge at high temperatures. With increasing base/acid ratio, the sludge flow velocity increases remarkably and peaks at 1.6. The interaction between Fe-Ca and Si-AI significantly affects the fluidity significantly. The findings are expected to optimize the condition of co-combustion and desirable furnace design for the incineration of sludge.

Combustion process in fluidized bed and agglomeration microstructure analysis for sludge

Combustion characteristics of sludge in fluidized bed

Ultrafine Particle Formation in Pulverized Coal, Biomass, and Waste Combustion: Understanding the Relationship with Flame Synthesis Process

Emission characteristics of sludge incineration in bubbling fluidized bed

Combustion Characteristics of Sewage Sludge in a Bench-Scale Fluidized Bed Reactor

RESEARCH OF COMBUSTION FUNDAMENTAL FOR HIGH DENSITY FLUIDIZED BED OF SLUDGE

Effect of Wastewater Treatment Processes on the Combustion Properties of Sewage Sludge

Co-Combustion Characteristics of Municipal Sewage Sludge and Coal in a Lab-Scale Fluidized Bed Furnace

Combustion Characteristics and Dynamic Study of Sewage Water and Sludge

Study On Sewage Sludge Fluidized Bed Incineration And Design Of 65t/D Incinerator

Combustion characteristics of sewage sludge,coal water slurry and sludge-CWS mixtures by thermo gravimetric analysis

Experimental Study on Emission Characteristics of Pollutants During Zhuyuan Sludge Combustion

Research on the Emissions of Harmful Gas in Fluidized Bed During MSW Combustion

Experimental Study on Desulfurization in Fluidized Bed Combustion of Coal Sludge

High-Temperature Ash Melting and Fluidity Behavior upon the Cocombustion of Sewage Sludge and Coal

Experimental Study of Particle Distribution in Bench-cale Opposed Multi-burner Gasifiers of Coal Water Slurry

EXPERIMENTAL STUDY ON FLUIDIZED BED AGGLOMERATION COMBUSTION USING FLY-ASH SLURRY WITH HIGH CARBON CONTENT AND COAL-WATER MIXTURE AS FUELS

Co-Combustion of Tannery Sludge in a Bench-Scale Fluidized-Bed Combustor: Gaseous Emissions and Cr Distribution and Speciation

Environmental analysis of paper mill sludge incineration in fluidized bed

Agglomeration characteristics in fluidized bed incineration of organic-condensed wastewater

Emission Characteristics of Pollutants During Fluidized-Bed Incineration of Pre-Dried Sewage Sludge